现行 SH/T 0565-2008
加抑制剂矿物油的油泥和腐蚀趋势测定法 加抑制剂矿物油的油泥和腐蚀趋势测定法 Standard test method for determination of the sludging and corrosion tendencies of inhibited mineral oils
发布日期:2008-04-23
实施日期:2008-10-01
分类信息
研制信息

归口单位: 中石化石油化工科学研究院

起草单位: 中国石油天燃气股份有限公司大连润滑油研究开发中心、 中国石油化工股份有限公司润滑油研发(北京)中心

起草人: 于兵、 苏江

标准简介

本标准规定了高温下,在有氧气、水、金属铜和铁存在时,评价加抑制剂的矿物油型汽轮机油和矿物油型抗磨液压油对铜催化剂金属产生腐蚀并形成油泥的趋势。本标准也适用于测试相对密度小于水并含有防锈剂和抗氧剂的循环油。注:在比对试验中,对油、水和油泥相中的铜和铁含量进行了测定。但发现铁的总含量太低(低于0. 8mg)而不适合作统计分析。本标准是对GB/T 12581的修改,GB/T 12581通过跟踪测定同类油品的酸值来确定油品的氧化安定性。油品酸值达到2.0mgKOH/g所需试验的小时数就是氧化寿命。本标准的步骤A要求测定和报告油泥的质量以及油、水和油泥中铜的总量,步骤B仅要求测定油泥的质量。这两个步骤中酸值的测定都是可选的。本标准采用(SI)国际单位制表示。本标准涉及某些与标准使用有关的安全问题。但是无意对所有安全问题都提出建议。因此,用户在使用本标准之前应建立适当的安全和防护措施并确定有适用性的管理制度

相似标准/计划/法规
ASTM D4310-22a
Standard Test Method for Determination of Sludging and Corrosion Tendencies of Inhibited Mineral Oils
测定抑制矿物油的沉降和腐蚀倾向的标准试验方法
2022-11-01
DIN 38415-1
German standard methods for the examination of water, waste water and sludge - Bio-assays with microorganisms (group T) Determination of organophosphate and carbamate pesticides by the cholinesterase inhibition test (T 1)
水、废水和污泥检验的德国标准方法.亚动物试验(T组).第1部分:胆碱酯酶抑制有机磷和氨基甲酸酯农药的测定(胆碱酯酶抑制试验)(T 1)
1995-02-01
DIN 38415-3
German standard methods for the examination of water, waste water and sludge - Bio-assays with microorganisms (group T) - Part 1: Determination of the mutagenic potential of water using the umu-test (T 3)
德国水、废水和污泥检验标准方法.亚动物试验(T组).第3部分:用umu试验(T 3)测定水和废水成分的基因型潜力
1996-12-01
DIN 38415-4
German standard methods for the examination of water, waste water and sludge - Bioassays with microorganisms (group T) - Part 4: Determination of the mutagenic potential of water using the Salmonella microsome test (Ames Test) (T 4)
德国水、废水和污泥检验标准方法亚动物试验(T组)第4部分:用沙门氏菌微粒体试验(Ames试验)测定基因毒性潜力(T 4)
1999-12-01
ASTM D3310-00(2023)
Standard Test Method for Determining Corrosivity of Adhesive Materials
测定粘性材料腐蚀性的标准试验方法
2023-01-01
ASTM D1743-22
Standard Test Method for Determining Corrosion Preventive Properties of Lubricating Greases
测定润滑脂防腐性能的标准试验方法
2022-05-01
ASTM D7548-22
Standard Test Method for Determination of Accelerated Iron Corrosion in Petroleum Products
石油产品中加速铁腐蚀测定的标准试验方法
2022-05-01
GB/T 5018-2008
润滑脂防腐蚀性试验法
Standard test method for determining corrosion preventive properties of lubricating greases
2008-02-13
ASTM D5485-21
Standard Test Method for Determining Corrosive Effect of Combustion Products Using the Cone Corrosimeter
用锥形腐蚀计测定燃烧产物腐蚀作用的标准试验方法
2021-03-01
ASTM B858-06(2024)
Standard Test Method for Ammonia Vapor Test for Determining Susceptibility to Stress Corrosion Cracking in Copper Alloys
测定铜合金应力腐蚀开裂敏感性的氨蒸气试验的标准试验方法
2024-07-01
ASTM D7858-13(2018)
Standard Test Method for Determination of Bisphenol A in Soil, Sludge, and Biosolids by Pressurized Fluid Extraction and Analyzed by Liquid Chromatography/Tandem Mass Spectrometry
通过压力流体萃取测定土壤 污泥和生物固体中双酚A的标准测试方法 并通过液相色谱/串联质谱法分析
2018-09-01
ASTM G198-17(2023)
Standard Test Method for Determining the Relative Corrosion Performance of Driven Fasteners in Contact with Treated Wood
与处理过的木材接触的传动紧固件相对腐蚀性能测定的标准试验方法
2023-11-01
ASTM D2688-23
Standard Test Method for Determination of Corrosion Rate in a Water System in the Absence of Heat Transfer (Weight Loss Method)
在没有热传递的情况下测定水系统腐蚀速率的标准试验方法(重量损失法)
2023-12-01
ASTM D7426-24
Standard Test Method for Assignment of the DSC Procedure for Determining Tg of a Polymer or an Elastomeric Compound
测定聚合物或弹性体化合物Tg的DSC程序分配的标准试验方法
2024-08-01
ASTM D4778-24
Standard Test Method for Determination of Corrosion and Fouling Tendency of Cooling Water Under Heat Transfer Conditions
热传递条件下冷却水腐蚀和结垢趋势测定的标准试验方法
2024-07-01
ASTM G47-22
Standard Test Method for Determining Susceptibility to Stress-Corrosion Cracking of 2XXX and 7XXX Aluminum Alloy Products
2XXX和7XXX铝合金产品应力腐蚀开裂敏感性测定的标准试验方法
2022-12-01
ASTM D6138-23a
Standard Test Method for Determination of Corrosion-Preventive Properties of Lubricating Greases Under Dynamic Wet Conditions (Emcor Test)
在动态潮湿条件下测定润滑脂防腐性能的标准试验方法(Emcor试验)
2023-07-01
NB/SH/T 6006-2020
石油产品铜腐蚀性快速试验 一次性铜箔片法
Standard test method for rapid determination of corrosiveness to copper from petroleum products disposable copper foill strip method
2020-10-23
ASTM D7667-21
Standard Test Method for Determination of Corrosiveness to Silver by Automotive Spark-Ignition Engine Fuel—Thin Silver Strip Method
用汽车火花点火发动机燃料薄银条法测定银腐蚀性的标准试验方法
2021-11-01
ASTM D7577-12(2021)
Standard Test Method for Determining the Accelerated Iron Corrosion Rating of Denatured Fuel Ethanol and Ethanol Fuel Blends
用于测定变性燃料乙醇和乙醇燃料混合物的加速铁腐蚀等级的标准测试方法
2021-05-01
油泥矿物油腐蚀趋势

最后更新时间 2025-08-31