现行 CB/T 1036-2008
船用板式冷却器 船用板式冷却器 Marine plate cooler
发布日期:2008-03-17
实施日期:2008-10-01
分类信息
研制信息

归口单位: 中国船舶工业综合技术经济研究院

起草单位: 南京中船绿洲机器有限公司、 中国船舶工业综合技术经济研究院

起草人: 周国忠、 陆彩虹

标准简介

本标准规定了可拆卸船用板式冷却器(以下简称冷却器)的结构型式、要求、检验方法、检验规则以及标志、包装、运输和贮存等。本标准适用于冷却介质为海水、淡水,被冷却介质为淡水、滑油,冷却面积为1m2~800m2,介质设计压力不大于1.0 MPa的冷却器的设计、制造和验收

相似标准/计划/法规
CB/T 4250-2013
船用管片式油冷却器
Marine tube plate cooler for oil
2013-04-25
CB 20035-2012
船用滑油、淡水冷却器
Marine lubricating oil cooler & freshwater cooler
2013-01-04
CB/T 4104-2008
船用舷外冷却器
Marine outboard cooler
2008-03-17
CB/T 4254-2013
船舶电机用空气冷却器
Air cooler for marine generators
2013-04-25
GB/T 2497-2023
船用柴油机增压空气冷却器
Charge air coolers for marine diesel engines
2023-05-23
JB/T 6003.1-2014
内燃机 机油冷却器第1部分:板翅式机油冷却器 技术条件
Internal combustion engines - Oil coolers - Part 1:Plate-fin coolers-Specifications
2014-05-12
NB/T 31101.2-2016
风力发电机组 板式冷却器 第2部分:试验方法
Plate cooler for wind turbine generator Part 2:Test method
2016-08-16
NB/T 31101.1-2016
风力发电机组 板式冷却器 第1部分:技术条件
Plate cooler for wind turbine generator Part 1:Technical condition
2016-08-16
CB/T 4264-2014
船用金属蜂窝复合板
Marine metal honeycomb plate
2014-05-06
JB/T 6652-2010
船用齿轮箱离合器片 技术条件
Specifications for marine gearbox clutch plates
2010-02-21
CB/T 3514-2015
船用机座环氧浇注垫片
Marine epoxy resin bed plate gaskets
2015-04-30
MIL MIL-C-7488A Notice 1-Cancellation
COOLER, OIL, PLATE, AIRCRAFT (S/S BY MIL-PRF-25478C) (SUPERSEDING MIL-C-7488)
飞机板式油冷却器(S/S BY MIL-PRF-25478C)(替代MIL-C-7488)
1997-11-28
MIL MIL-C-7488A Amendment 3
COOLER, OIL, PLATE, AIRCRAFT (S/S BY MIL-PRF-25478C) (SUPERSEDING MIL-C-7488)
飞机板式油冷却器(S/S BY MIL-PRF-25478C)(替代MIL-C-7488)
1995-03-28
MIL MIL-C-7488A
COOLER, OIL, PLATE, AIRCRAFT (S/S BY MIL-PRF-25478C) (SUPERSEDING MIL-C-7488)
飞机油板冷却器(由MIL-PRF-25478C提供)(取代MIL-C-7488)
1974-08-06
KS V ISO 13798(2019 Confirm)
선박용 리세스 비트(철판형)
凹CKM上(钢板型)为海洋使用
2014-10-13
DIN 83307
Ships and marine technology - Round- or spiral plated man-made fibre ropes
船舶和海洋技术.圆形或螺旋电镀人造纤维绳
2013-04-01
BS ISO 13798-2020
Ships and marine technology. Ship's mooring and towing fittings. Recessed bitts (steel plate type)
船舶和海洋技术 船舶的系泊和拖曳装置 嵌入式钻头(钢板型)
2020-09-02
KS V ISO 13798
선박 및 해양기술 — 선박용 계류 및 예인 설비 — 리세스 비트(강판형)
船舶和海上技术.船舶的系泊和拖曳装置.凹式桩(钢板型)
2022-03-30
GB/T 36667-2018
船舶和海上技术 船舶系泊和拖带设备 舷内带缆桩(钢板型)
Ships and marine technology—Ship’s mooring and towing fittings—Recessed bitts(steel plate type)
2018-09-17
ISO 13798-2020
Ships and marine technology — Ship's mooring and towing fittings — Recessed bitts (steel plate type)
船舶和船舶技术 - 船舶系泊和牵引配件 - 嵌入式钻头(钢板型)
2020-08-28
冷却器板式船用

最后更新时间 2025-08-31