GB/T 23711.1-2019
塑料衬里压力容器试验方法 第1部分：电火花试验
Test method for pressure vessels lined with plastics—Part 1:Spark testing
2019-12-10
GB/T 40237-2021
泡沫塑料着火性试验方法 电焊火花法
Test method for ignitability of foamed plastic—Welding spark method
2021-05-21
GB/T 41312.3-2023
化工用设备渗透性检测方法 第3部分：塑料及其衬里设备
Test method for measurement of the permeability of chemical equipment—Part 3: Plastics and lining equipment
2023-11-27
JB/T 4278.10-2011
橡皮塑料电线电缆试验仪器设备检定方法 第10部分：火花试验机
Verification procedure for test equipment of rubber plastic wire and cable. Part 10：Spark tester
2011-05-18
GB/T 26961-2011
不透性石墨设备水压试验方法
Hydraulic pressure test method of graphite lined equipment
2011-07-19
GB/T 23711.7-2019
塑料衬里压力容器试验方法 第7部分：泄漏试验
Test method for pressure vessels lined with plastics—Part 7:Leakage testing
2019-12-10
ASTM D2885-21
Standard Test Method for Determination of Octane Number of Spark-Ignition Engine Fuels by On-Line Direct Comparison Technique
用在线直接比较技术测定火花点火发动机燃料辛烷值的标准试验方法
2021-07-01
GB/T 23711.6-2019
塑料衬里压力容器试验方法 第6部分：耐压试验
Test method for pressure vessels lined with plastics—Part 6:Anti pressure testing
2019-12-10
GB/T 23711.2-2019
塑料衬里压力容器试验方法 第2部分：耐低温试验
Test method for pressure vessels lined with plastics—Part 2:Low-temperature testing
2019-12-10
GB/T 23711.8-2019
塑料衬里压力容器试验方法 第8部分：耐高电阻试验
Test method for pressure vessels lined with plastics—Part 8:High-resistance testing
2019-12-10
UNE 68097-1990
SOWING EQUIPMENT. SEED DRILLS FOR SOWING IN LINES. TEST METHODS
播种设备 成排播种的播种机 测试方法
1990-03-07
GB/T 7994.2-2014
搪玻璃设备试验方法 第2部分：气密性试验
Test method of glass-lined equipments―Part 2: Gas leak test
2014-12-05
GB/T 7994.1-2014
搪玻璃设备试验方法 第1部分：水压试验
Test method of glass-lined equipments—Part 1: Hydraulic pressure test
2014-12-05
GB/T 41312.1-2022
化工用设备渗透性检测方法 第1部分:石墨及其衬里设备
Test method for measurement of the permeability of chemical equipment—Part 1: Graphite and lining equipment
2022-03-09
BS 5173-103.6-1990
Methods of test for rubber and plastics hoses and hose assemblies. Physical tests-Determination of ignitability of lining
橡胶和塑料软管及软管组件的试验方法 物理测试
1990-08-31
BS EN 13451-5-2014
Swimming pool equipment-Additional specific safety requirements and test methods for lane lines and dividing line
游泳池设备 车道线和分界线的附加特定安全要求和试验方法
2014-09-30
ASTM D5930-17
Standard Test Method for Thermal Conductivity of Plastics by Means of a Transient Line-Source Technique
通过瞬态线源技术的塑料热导率的标准测试方法
2017-08-01
GB/T 23711.4-2019
塑料衬里压力容器试验方法 第4部分：耐负压检验
Test method for pressure vessels lined with plastics—Part 4:Negative pressure inspection
2019-12-10
GB/T 23711.3-2019
塑料衬里压力容器试验方法 第3部分：耐高温检验
Test method for pressure vessels lined with plastics—Part 3:High-temperature inspection
2019-12-10
KS B ISO 5690-2(2020 Confirm)
비료 살포기 — 시험방법 — 제2부: 비료 조파기
化肥分配设备 - 试验方法 - 第2部分:化肥分销商
2015-10-13