作废 JC/T 2041-2010
聚氨酯灌浆材料 聚氨酯灌浆材料 Polyurethane grouting materials
发布日期:2010-11-10
实施日期:2011-03-01
分类信息
研制信息

归口单位: 全国轻质与装饰装修材料标准化技术委员会

起草单位: 苏州非金属矿工业设计研究院、 建筑材料工业技术监督研究中心

起草人: 沈春林、 杨斌

标准简介

本标准规定了聚氨酯灌浆材料的术语和定义、分类和标记、一般要求、技术要求、试验方法、检验规则、标志、包装、贮存与运输。本标准适用于水利水电、建筑、交通、采矿等领域中混凝土裂缝修补、防渗堵漏、加固补强及基础帷幕防渗等工程所用的聚氨酯灌浆材料

相似标准/计划/法规
JT/T 990-2015
桥梁混凝土裂缝压注胶和裂缝注浆料
Grouting glue and grouting material for concrete crack of bridge
2015-07-11
JT/T 1130-2017
桥梁支座灌浆材料
Bearing grouting material or bridge
2017-04-12
JC/T 2327-2015
水性聚氨酯地坪
Waterborne polyurethane screed material
2015-07-14
JT/T 1238-2019
半柔性混合料用水泥基灌浆材料
Semi-flexible mixture-cementitious grouting material
2019-01-02
ASTM D7487-24
Standard Practice for Polyurethane Raw Materials: Polyurethane Foam Cup Test
聚氨酯原材料的标准实施规程:聚氨酯泡沫杯试验
2024-02-01
SH/T 3604-2019
石油化工灌浆材料应用技术规程(附条文说明)
Technical specification for the application of grouting materials in petrolchemical engineering
2019-11-11
GB/T 51320-2018
建设工程化学灌浆材料应用技术标准
Standard for applications of chemical grouting materials in constructIon englneerlng
2018-09-11
NASA MSFC-SPEC-3686 Rev.D
Material Specification for Polyurethane Foam - Sprayableble
可喷涂聚氨酯泡沫材料规范
2020-07-20
ASTM D7997-21
Standard Practice for Polyurethane Raw Materials: Gel Tests for Polyurethane Non-Foam Formulations
聚氨酯原料的标准实践:聚氨酯非泡沫配方的凝胶测试
2021-01-15
CID A-A-59607
GROUT MATERIAL, RAPID SETTING (SUPERSEDING MIL-G-81830A)
快速凝固灌浆材料(取代MIL-G-81830A)
2004-08-06
HG/T 4574-2014
聚氨酯原料发泡反应特性的测定方法
Polyurethane material - Determination of foam reaction characteristic
2014-05-06
GB/T 32469-2016
塑料 聚氨酯原料 甲苯二异氰酸酯
Plastics—Polyurethane raw materials—Toluene diisocyanates
2016-02-24
DL/T 5785-2019
水电水利工程化学灌浆材料试验规程
Test code of chemical grouting materials for hydropower and water conservancy engineering
2019-06-04
UNE 53984-1-2003
Plastics. Test method for polyurethane raw materials. Aromatic isocyanates for use in the production of polyurethane. Determination of acidity.
塑料 聚氨酯原材料的试验方法 聚氨酯生产用芳香族异氰酸酯 酸度的测定
2003-05-14
JIS K 1556-2006
Polyurethane raw materials -- Testing methods for toluene diisocyanate
聚氨酯原材料甲苯二异氰酸酯试验方法
2006-01-01
ASTM D3851-17(2022)
Standard Specification for Microcellular Polyurethane Shoe Soling Materials
微孔聚氨酯鞋底材料的标准规范
2022-03-15
ISO 14896-2009
Plastics — Polyurethane raw materials — Determination of isocyanate content
塑料制品;聚氨酯原料——异氰酸酯含量的测定
2009-02-11
ASTM D5629-23
Standard Test Method for Polyurethane Raw Materials: Determination of Acidity in Low-Acidity Aromatic Isocyanates and Polyurethane Prepolymers
聚氨酯原料的标准试验方法:低酸度芳香异氰酸酯和聚氨酯预聚物中酸度的测定
2023-03-01
UNE 53951-2004
Plastics. Raw materials test for polyurethane. Polyols. Determination of pH
塑料 聚氨酯原材料试验 多元醇 pH值的测定
2004-12-24
KS M 6754
비공기입식 타이어용 우레탄계 탄성체의 시험방법
非充气轮胎用聚氨酯弹性材料试验方法
2021-03-16
灌浆聚氨酯材料

最后更新时间 2025-09-01