现行 NB/SH/T 0839-2010
汽车轮毂轴承润滑脂低温转矩测定法 汽车轮毂轴承润滑脂低温转矩测定法 Standard test method for low-temperature torque of grease-lubricated wheel bearings
发布日期:2011-01-09
实施日期:2011-05-01
分类信息
研制信息

归口单位: 全国石油产品和润滑剂标准化技术委员会

起草单位: 中国石油化工股份有限公司润滑油重庆分公司

起草人: 田忠利、 罗玉兰

标准简介

1.1 本标准规定了用于测定经特殊制造的、有弹簧加载的汽车轮毂轴承装配中的润滑脂在低温条件下的运转性能的方法。由测得的阻力计算出的转矩值作为润滑脂黏度阻力的指标。本标准适用于测定在-40℃下转矩值小于35N?m的润滑脂。1.2 本标准采用国际单位制[SI]单位。1.3 本标准涉及某些有危险性的材料、操作和设备,但并未对与此有关的所有安全问题都提出建议。因此,用户在使用本标准前,应建立适当的安全和防护措施,并确定相关规章限制的适用性

相似标准/计划/法规
ASTM D4693-07(2021)
Standard Test Method for Low-Temperature Torque of Grease-Lubricated Wheel Bearings
润滑脂润滑车轮轴承低温扭矩的标准试验方法
2021-10-01
ASTM D1478-20
Standard Test Method for Low-Temperature Torque of Ball Bearing Grease
滚珠轴承润滑脂低温扭矩的标准试验方法
2020-05-01
ASTM D3336-20b
Standard Test Method for Life of Lubricating Greases in Ball Bearings at Elevated Temperatures
滚珠轴承在高温下润滑脂寿命的标准试验方法
2020-11-01
SH/T 0428-2008
高温下润滑脂在球轴承中的寿命测定法
Standard test method for life of lubricating greases in ball bearings at elevanted temperatures
2008-04-23
ASTM D2595-22
Standard Test Method for Evaporation Loss of Lubricating Greases Over Wide-Temperature Range
宽温度范围内润滑脂蒸发损失的标准试验方法
2022-12-01
ASTM D2265-22
Standard Test Method for Dropping Point of Lubricating Grease Over Wide Temperature Range
宽温度范围内润滑脂滴点的标准试验方法
2022-04-01
SH/T 0661-1998
润滑脂宽温度范围蒸发损失测定法
Standard test method for evaporation loss of lubricating greases over wide-temperature range
1998-06-23
BS ISO 13737-2004
Method of test for petroleum and its products. BS 2000-527. Petroleum products and lubricants. Determination of low-temperature cone penetration of lubricating greases
石油及其产品的试验方法 英国标准2000-527 石油产品和润滑剂 润滑脂低温锥入度的测定
2004-07-19
GB/T 11145-2014
润滑剂低温黏度的测定 勃罗克费尔特黏度计法
Standard test method for measurement of low-temperature viscosity of lubricants―Brookfield viscometer method
2014-02-19
SH/T 0732-2004
润滑油低温低剪切速率下粘度与温度关系测定法(温度扫描法)
Standard test method for low temperature, low shear rate, viscosity/temperature dependence of lubricating oils using a temperature - scanning technique
2004-04-09
ASTM D5133-20a
Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
使用温度扫描技术的低温 低剪切速率 粘度/温度对润滑油的依赖性的标准测试方法
2020-06-01
ASTM D2532-22
Standard Test Method for Viscosity and Viscosity Change After Standing at Low Temperature of Aircraft Turbine Lubricants
飞机涡轮润滑剂低温静置后粘度和粘度变化的标准试验方法
2022-12-01
ASTM D6821-20a
Standard Test Method for Low Temperature Viscosity of Drive Line Lubricants in a Constant Shear Stress Viscometer
恒定剪切应力粘度计中传动系润滑剂低温粘度的标准试验方法
2020-11-01
NB/SH/T 0983-2019
传动系统润滑油低温黏度的测定 恒剪切应力黏度计法
Standard test method for low temperature viscosity of drive line lubricants in a constant shear stress viscometer
2019-06-04
ASTM D2983-23
Standard Test Method for Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants using a Rotational Viscometer
使用旋转粘度计测定自动变速器油、液压油和润滑剂的低温粘度的标准试验方法
2023-11-01
ASTM D6121-19ae1
Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles
在低速和高扭矩条件下评定准双曲面驱动轴用润滑剂承载能力的标准试验方法
2019-11-01
ASTM D8165-24
Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Used in Hypoid Final-Drive Axles Operated under Low-Speed and High-Torque Conditions
在低速和高转矩条件下运行的准双曲面最终传动轴所用润滑剂承载能力评定的标准试验方法
2024-05-01
ASTM D8210-22
Standard Test Method for Automatic Determination of Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants Using a Rotational Viscometer
用旋转粘度计自动测定自动变速器油、液压油和润滑剂低温粘度的标准试验方法
2022-07-01
轴承汽车转矩轮毂低温

最后更新时间 2025-09-01