GB/T 15719-2011
现场发泡包装
Foam-in-place packaging
2011-07-20
SAE AMS3572C
Resin Polyurethane, Foam-In-Place, Rigid
树脂聚氨酯 原位泡沫 刚性
2016-10-13
GB/T 15718-2008
现场发泡包装材料
Foam-in-place packaging materials
2008-07-18
SAE AMS3574A
Polyurethane, Foam-In-Place, Rigid Closed Cell, for Helmet Liners
聚氨酯 现场泡沫 刚性 闭孔 头盔衬里
1995-03-01
NEMA LSD 57-2013
Polyurethane Foam Application: Lighting Equipment
聚氨酯泡沫应用:照明设备
2013-11-22
MIL MIL-HDBK-775
FOAM-IN-PLACE PACKAGING, PROCEDURES FOR ((SUPERSEDING MIL-STD-1191)
泡沫就地包装程序（代替MIL-STD-1191）
1996-04-19
MIL MIL-F-45216A
FOAM-IN-PLACE PACKAGING, PROCURES FOR (S/S BY MIL-STD-1191)
泡沫就地包装 采购（由MIL-STD-1191提供）
1989-12-31
GOST R 59674-2021
Изделия теплоизоляционные из пенополиуретана для строительства. Жесткие пенополиуретановые системы после применения. Правила и контроль производства напыляемой теплоизоляции на месте выполнения работ
建筑用聚氨酯泡沫隔热材料 应用后的硬质聚氨酯泡沫系统 工作场所喷涂隔热材料生产的规则和控制
MIL MIL-PRF-26514G
POLYURETHANE FOAM, RIGID OR FLEXIBLE, FOR PACKAGING (SUPERSEDING MIL-P-26514F)
包装用硬质或柔性聚氨酯泡沫（代替MIL-P-26514F）
1995-08-01
MIL MIL-P-21929C Notice 1-Validation 1
PLASTIC MATERIAL, CELLULAR POLYURETHANE, FOAM-IN-PLACE, RIGID (2 POUNDS PER CUBIC FOOT)
塑料泡沫聚氨酯泡沫塑料（每立方英尺2磅）
2020-12-24
MIL MIL-DTL-24249B
PLASTIC MATERIAL, CELLULAR POLYURETHANE, RIGID, VOID FILLER, FOAM-IN-PLACE, LARGE SCALE AND INSTALLATION OF
塑料材料、多孔聚氨酯、刚性、空隙填料、泡沫就地、大规模和安装
2019-01-25
MIL MIL-PRF-83671B
FOAM-IN-PLACE PACKAGING MATERIALS, GENERAL SPECIFICATION FOR (SUPERSEDING MIL-F-83671A)
泡沫就地包装材料通用规范（代替MIL-F-83671A）
1997-02-03
MIL MIL-STD-1191 Notice 1-Cancellation
FOAM-IN-PLACE PACKAGING, PROCEDURES FOR (S/S BY MIL-HDBK-775) (SUPERSEDING MIL-F-45216A)
泡沫原位包装 （S/S BY MIL-HDBK-775）程序（代替MIL-F-45216A）
1996-04-19
MIL MIL-STD-1191
FOAM-IN-PLACE PACKAGING, PROCEDURES FOR (S/S BY MIL-HDBK-775) (SUPERSEDING MIL-F-45216A)
泡沫就地包装程序（由MIL-HDBK-775提供）（取代MIL-F-45216A）
1989-12-31
MIL MIL-F-87075B Notice 1-Cancellation
FOAM-IN-PLACE PACKAGING SYSTEM FOR SHIPBOARD USE (SUPERSEDING MIL-F-87075A) (NO S/S DOCUMENT)
船用泡沫原位包装系统（取代MIL-F-87075A）（无S/S文件）
2000-11-16
MIL MIL-F-87075B
FOAM-IN-PLACE PACKAGING SYSTEM FOR SHIPBOARD USE (SUPERSEDING MIL-F-87075A) (NO S/S DOCUMENT)
船用泡沫就地包装系统（替代MIL-F-87075A）（无S/S文件）
1984-10-26
QPL QPL-24249-5
PLASTIC MATERIAL, CELLULAR POLYURETHANE, RIGID, VOID FILLER, FOAM-IN-PLACE, LARGE SCALE AND INSTALLATION OF(SUPERSEDING QPL-24249-4)
塑料材料、多孔聚氨酯、刚性、空隙填料、泡沫就地、大规模和安装（取代QPL-249-4）
1996-05-10
MIL MIL-P-21929C Amendment 1
PLASTIC MATERIAL, CELLULAR POLYURETHANE, FOAM-IN-PLACE, RIGID (2 POUNDS PER CUBIC FOOT) (SUPERSEDING MIL-P-21929B)
塑料材料 泡沫聚氨酯 原位发泡 刚性（2磅/立方英尺）（取代MIL-P-21929B）
1994-05-27
MIL MIL-P-24249A Amendment 1
PLASTIC MATERIAL, CELLULAR POLYURETHANE, RIGID, VOID FILLER, FOAM-IN-PLACE, LARGE SCALE AND INSTALLATION OF (SUPERSEDING MIL-P-24249)
塑料材料、多孔聚氨酯、刚性、空隙填充物、泡沫原位、大规模和安装（取代MIL-P-24249）
1992-10-30
MIL MIL-P-21929C
PLASTIC MATERIAL, CELLULAR POLYURETHANE, FOAM-IN-PLACE, RIGID (2 POUNDS PER CUBIC FOOT) (SUPERSEDING MIL-P-21929B)
塑料材料 多孔聚氨酯 就地发泡 刚性（每立方英尺2磅）（取代MIL-P-21929B）
1991-01-15