MIL MIL-DTL-27426C Notice 1-Validation 1
RINGS, RETAINING, SPIRAL (UNIFORM CROSS SECTION)
保持环 螺旋形（均匀横截面）
2019-07-22
T/UNP 301-2024
超高压螺旋形弹簧管压力表
ASTM A125-24
Standard Specification for Steel Springs, Helical, Heat-Treated
热处理螺旋形钢弹簧的标准规范
2024-10-15
JB/T 9551-1999
热双金属螺旋形元件热偏转率试验方法
Standard test method for thermal deflection rate of spiral and helical coils of thermostat metals
1999-08-06
GB/T 24297-2009
热双金属螺旋形元件热偏转率试验方法
The test method for thermal deflection rate of spiral and helix coils of thermostat bimetal
2009-09-30
MIL MIL-DTL-27426C
RINGS, RETAINING, SPIRAL (UNIFORM CROSS SECTION) (SUPERSEDING MIL-DTL-27426B)
螺旋形固定环（均匀横截面）（代替MIL-DTL-27426B）
1998-09-22
GB/T 24272-2009
热双金属平螺旋形元件机械转矩率试验方法
Test method for mechanical torque rate of spiral coils of thermostat metal
2009-06-19
JB/T 7130-2008
热双金属平螺旋形元件机械转矩率试验方法
Test method mechanical torque rate of spiral coils of thermostat metal
2008-02-01
AS/NZS 2041.4-2010
Buried corrugated metal structures, Part 4: Helically formed sinusoidal pipes
埋地波纹金属结构第4部分:螺旋形正弦管
2010-08-10
MIL MIL-DTL-27426/1A
RINGS, RETAINING, SPIRAL (UNIFORM CROSS SECTION) MEDIUM DUTY EXTERNAL (SUPERSEDING MIL-DTL-27426/1)
中等负荷外部螺旋形（均匀横截面）固定环（取代MIL-DTL-27426/1）
1998-09-22
UNE-EN 1979-1999
PLASTICS PIPING AND DUCTING SYSTEMS. THERMOPLASTICS SPIRALLY-FORMED STRUCTURED-WALL PIPES. DETERMINATION OF THE TENSILE STRENGTH OF A SEAM
塑料管道系统 热塑性塑料螺旋形结构管 接缝抗拉强度的测定
1999-12-31
SAE AIR36
Spiral Failure - "O" Ring Seals - Landing Gear Shock Struts
螺旋故障-“O”形密封圈-起落架减震支柱
1953-10-01
MIL MIL-R-27426A
RINGS, RETAINING, SPIRAL (UNIFORM CROSS SECTION) (SUPERSEDING MIL-R-27426) (S/S BY MIL-DTL-27426B)
螺旋形固定环（均匀横截面）（取代MIL-R-27426）（S/S由MIL-DTL-27426B替代）
1972-05-01
GOST 20538-1975
Фрезы концевые удлиненные диаметром от 20 до 50 мм с коническим хвостовиком, оснащенные винтовыми твердосплавными пластинами. Конструкция и размеры
长度为20-50 mm的圆锥柄立铣刀 带螺旋形硬质合金刀片 施工和尺寸
GOST 18930-1973
Кольца резьбовые с укороченным профилем для трубной цилиндрической резьбы диаметром от 1/16" до 3 3/4". Конструкция и основные размеры
用于管道圆柱螺纹的螺旋形环形测量仪 从1/16“至3 3/4”公称直径 施工和基本尺寸
BS EN ISO 13262-2017
Thermoplastics piping systems for non-pressure underground drainage and sewerage. Thermoplastics spirally-formed structured-wall pipes. Determination of the tensile strength of a seam
无压地下排水和下水道用热塑性塑料管道系统 热塑性塑料螺旋形结构壁管 接缝抗拉强度的测定
2018-01-19
EN ISO 13262-2017
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics spirally-formed structured-wall pipes - Determination of the tensile strength of a seam (ISO 13262:2010)
用于非压力地下排水和污水的热塑性塑料管道系统 - 热塑性螺旋形结构壁管 - 接缝拉伸强度的测定（ISO 13262:2010）
2017-10-18
BS 09/30198121 DC
BS ISO 13262. Thermoplastics piping systems for non-pressure underground drainage and sewerage. Thermoplastics spirally-formed structured-wall pipes. Determination of the tensile strength of a seam
BS ISO 13262 无压地下排水和下水道用热塑性塑料管道系统 热塑性塑料螺旋形结构壁管 接缝抗拉强度的测定
2009-03-05