粉末冶金材料与制品化学分析方法 第3部分:铁基材料与制品中钼的测定(硫氰酸盐光度法)粉末冶金材料与制品化学分析方法 第3部分:铁基材料与制品中钼的测定(硫氰酸盐光度法)Methods for chemicalanalysis of powder metallurgy materials and products. Part 3：The thiocyanate photometric method for the determination of molybdenum in iron-based materials and products
粉末冶金摩擦材料化学分析方法
Methods for chemical analysis of friction materials of powder metallurgy
2011-12-20
ASTM B933-20
Standard Test Method for Microindentation Hardness of Powder Metallurgy (PM) Materials
粉末冶金（PM）材料的微压痕硬度的标准测试方法
2020-10-01
ASTM B311-22
Standard Test Method for Density of Powder Metallurgy (PM) Materials Containing Less Than Two Percent Porosity
孔隙率小于2%的粉末冶金材料密度的标准试验方法
2022-09-01
JB/T 8063.1-2011
粉末冶金材料与制品化学分析方法 第1部分：铁基材料与制品中碳的测定（气体容量法）
Methods for chemical analysis of powder metallurgy materials and products — Part 1：The gas volumetric method for the determination of carbon in iron-based materials and products
2011-12-20
JB/T 8063.8-2011
粉末冶金材料与制品化学分析方法 第8部分:铜基材料与制品中铁的测定(EDTA-H2O2光度法)
Methods for chemical analysis of powder metallurgy materials and products — Part 8：The EDTA-H2O2 photometric method for the determination of iron in copper-based materials and products
2011-12-20
JB/T 8063.6-2011
粉末冶金材料与制品化学分析方法 第6部分：铜基材料与制品中铅的测定（电解分离-EDTA滴定法）
Methods for chemical analysis of powder metallurgy materials and products — Part 6：The electrolytic separation-EDTA titrimetric method for the determination of lead in copper -based materials and products
2011-12-20
JB/T 8063.4-2011
粉末冶金材料与制品化学分析方法 第4部分:铜基材料与制品中铜的测定(碘化钾-硫代硫酸钠滴定法)
Methods for chemical analysis of powder metallurgy materials and products — Part 4：The potassium iodide-sodium thiosulfate titrimetric method for the determination of copper in copper -based materials and products
2011-12-20
JB/T 8063.2-2011
粉末冶金材料与制品化学分析方法 第2部分：铁基材料与制品中铜的测定（氟化氢铵掩蔽-碘量法）
Methods for chemical analysis of powder metallurgy materials and products. Part 2：The ammonium hydrogen fluoride masking,iodometriy method for the determination of copper in iron-based materials and products
2011-12-20
ASTM B939-21
Standard Test Method for Radial Crushing Strength, K, of Powder Metallurgy (PM) Bearings and Structural Materials
粉末冶金（PM）轴承和结构材料的径向破碎强度的标准测试方法 K
2021-04-01
JB/T 8063.7-2011
粉末冶金材料与制品化学分析方法 第7部分：铜基材料与制品中锌的测定（硫酸铅钡共沉淀-EDTA滴定法）
Methods for chemical analysis of powder metallurgy materials and products — Part 7：The lead-barium sulfate precipitation- EDTA titrimetric method for the determination of zinc in copper-based materials and products
2011-12-20
JB/T 8063.5-2011
粉末冶金材料与制品化学分析方法 第5部分：铜基材料与制品中锡的测定（次磷酸钠还原-碘酸钾滴定法）
Methods for chemical analysis of powder metallurgy materials and products — Part 5：The secondary sodium phosphate reduction – potassium iodate titrimetric method for the determination of tin in copper –based materials and products