CAN/CGSB 3.18-2000 AMEND.NO.1
Diesel Fuel for Locomotive-Type Medium-Speed Diesel Engines
机车型中速柴油机用柴油
2004-03-01
TB/T 2724-2008
内燃机车用燃油锅炉预热装置
Fuel boiler preheating unit for diesel locomotive
2008-10-14
TB/T 2416-2010
内燃机车柴油机喷油泵试验台
Fuel injection pump tester of locomotive diesel engine
2010-08-22
TB/T 2716-2016
机车、动车用柴油机喷油器
Fuel injector for diesel engine of locomotive and rail car
2016-05-26
TB/T 3240-2010
内燃机车柴油机用高压油管
High-pressure fuel ejection pipe for diesel locomotive engine
2010-08-22
TB/T 2715-2016
机车、动车用柴油机喷油泵
Fuel injection pump for diesel engine of locomotive and rail car
2016-05-26
NB/T 11641-2024
煤矿用柴油机车燃油喷射电控装置
Diesel locomotive fuel injection electric control device for coal mine
2024-09-24
KS V ISO 21487(2019 Confirm)
소형선박 — 상설 가솔린 및 디젤 연료 탱크
小型工艺 - 永久安装的汽油和柴油油箱
2014-10-13
KS V ISO 21487(2024 Confirm)
소형선박 — 상설 가솔린 및 디젤 연료 탱크
小艇永久安装的汽油和柴油油箱
2014-10-13
GB/T 30498-2014
小艇 永久性安装的汽油和柴油燃油柜
Small craft—Permanently installed petrol and diesel fuel tanks
2014-02-19
ISO 21487-2022
Small craft — Permanently installed petrol and diesel fuel tanks
小艇.永久安装的汽油和柴油燃料箱
2022-11-11
UNE-EN ISO 21487-2008
Small craft - Permanently installed petrol and diesel fuel tanks (ISO 21487:2006)
小艇.永久安装的汽油和柴油燃料箱（ISO 21487-2006）
2008-02-20
BS EN 13341-2005+A1-2011
Static thermoplastic tanks for above ground storage of domestic heating oils, kerosene and diesel fuels. Blow moulded and rotationally moulded polyethylene tanks and rotationally moulded tanks made of anionically polymerized polyamide 6. Requirements and test methods
家用取暖油、煤油和柴油地面储存用静态热塑性储罐 吹塑和旋转模塑聚乙烯罐和阴离子聚合聚酰胺6制成的旋转模塑罐 要求和试验方法
2011-05-31
BS 07/30172345 DC
BS EN 15724. Thermoplastics static tanks for above ground storage of domestic heating oils, kerosene and diesel fuels. Secondary containments used with tanks complying with EN 13341. Requirements and test methods
英国标准EN 15724 家用取暖油、煤油和柴油地面储存用热塑性静态储罐 与符合EN 13341的储罐一起使用的二级容器 要求和试验方法
2007-10-02
UNE-EN 13341-2005
Thermoplastics static tanks for above ground storage of domestic heating oils, kerosene and diesel fuels - Blow moulded polyethylene, rotationally moulded polyethylene and polyamide 6 by anionic polymerization tanks - Requirements and test methods
家用加热油、煤油和柴油地面储存用热塑性静态罐.阴离子聚合罐吹塑聚乙烯、旋转模塑聚乙烯和聚酰胺6.要求和试验方法
2005-12-28
DIN EN 13341
Static thermoplastic tanks for above ground storage of domestic heating oils, kerosene and diesel fuels - Blow moulded and rotationally moulded polyethylene tanks and rotationally moulded tanks made of anionically polymerized polyamide 6 - Requirements and test methods (includes Amendment A1:2011)
家用加热油、煤油和柴油地面储存用静态热塑性储罐.吹塑和旋转模塑聚乙烯储罐和阴离子聚合聚酰胺6制成的旋转模塑储罐.要求和试验方法（包括修改件A1:2011）
2011-04-01
MIL MIL-T-62032H Notice 1-Inactivation
TRUCKS, TANK: FUEL SERVICING AND AIRCRAFT FUEL SERVICING, 1,000 TO 4,000 GALLON, DIESEL AND GASOLINE ENGINE DRIVEN, 16,000 TO 50,000 POUNDS GVW, 4X2, 4X4, 6X4, AND 6X6, MODIFIED COMMERCIAL (SUPERSEDING MIL-T-62032G)
卡车 油箱:燃料服务和飞机燃料服务 1000至4000加仑 柴油和汽油发动机驱动 16000至50000磅GVW 4X2 4X4 6X4和6X6 改装商用（取代MIL-T-62032G）
1996-01-02
MIL MIL-T-62032H
TRUCKS, TANK: FUEL SERVICING AND AIRCRAFT FUEL SERVICING, 1,000 TO 4,000 GALLON, DIESEL AND GASOLINE ENGINE DRIVEN, 16,000 TO 50,000 POUNDS GVW, 4X2, 4X4, 6X4, AND 6X6, MODIFIED COMMERCIAL (SUPERSEDING MIL-T-62032G)
卡车 油箱:燃油服务和飞机燃油服务 1000至4000加仑 柴油和汽油发动机驱动 16000至50000磅GVW 4X2 4X4 6X4和6X6 改装商用（取代MIL-T-62032G）
1991-05-20