HB 3-41-2004
琴形卡箍
Stradivarius clamp
2004-09-01
MIL MS36006B
CLAMP, RUBBER TUBING, SHUTOFF, PINCHCOCK TYPE, MOHR DESIGN (NO S/S DOCUMENT)
卡箍 橡胶管 关闭 钳形 莫尔设计（无S/S文件）
1985-12-04
DIN 78027
Tubeless clamp in tyre valves (with O-ring seal)
轮胎气门中的无内胎卡箍（带O形密封圈）
1979-02-01
MIL MS36005B Notice 1-Cancellation
CLAMP, RUBBER TUBING, SHUTOFF, PINCHOCOCK TYPE, DAY DESIGN (NO S/S DOCUMENT)
钳形旋塞式关断橡胶管卡箍 日设计（无S/S文件）
1993-05-25
MIL MIL-DTL-27536C Notice 1-Cancellation
COUPLING, CLAMP, GROOVED, V-BAND(SUPERSEDING MIL-C-27536B) (S/S BY SAE-AS5355)
V形带槽卡箍联轴器（取代MIL-C-27536B）（由SAE-AS5355提供）
1999-03-31
MIL MIL-DTL-27536/3 Notice 1-Cancellation
COUPLING, CLAMP, GROOVED, V-BAND, 1.750 TO 14.250 FLANGE OD (-320 DEG. TO +1200 DEG. F) (S/S BY SAE-AS5355/3) (SUPERSEDING MS27116C)
V形带槽卡箍联轴器 1.750至14.250法兰OD（-320°至+1200°F）（由SAE-AS5355/3提供）（取代MS27116C）
1999-03-31
MIL MS27115C Notice 2-Cancellation
COUPLING, CLAMP, GROOVED, V BAND, 1.750 TO 6.250 FLANGE OD (MINUS 450 DEG. TO PLUS 200 DEG. F) (S/S BY MIL-DTL-27536/2) (SUPERSEDING MS27115B)
V形带槽卡箍联轴器 1.750至6.250法兰OD（-450°至+200°F）（S/S BY MIL-DTL-2536/2）（替代MS27115B）
1995-12-15
MIL MS27115C Notice 3-Cancellation
COUPLING, CLAMP, GROOVED, V BAND, 1.750 TO 6.250 FLANGE OD (MINUS 450 DEG. TO PLUS 200 DEG. F) (S/S BY MIL-DTL-27536/2) (SUPERSEDING MS27115B)
V形带槽卡箍联轴器 1.750至6.250法兰OD（-450°至+200°F）（S/S BY MIL-DTL-2536/2）（替代MS27115B）
1997-04-03
MIL MS27116C Notice 3-Cancellation
COUPLING, CLAMP, GROOVED, V BAND, 1.750 TO 14.250 FLANGE OD (MINUS 320 DEG. TO PLUS 1500 DEG. F) (S/S BY MIL-DTL-27536/3) (SUPERSEDING MS27116B)
V形带槽卡箍联轴器 1.750至14.250法兰OD（-320°至+1500°F）（S/S BY MIL-DTL-2536/3）（替代MS27116B）
1997-04-03
MIL MS27114C Notice 3-Cancellation
COUPLING, CLAMP, GROOVED, V BAND, 1.750 TO 14.250 FLANGE OD, (MINUS 65 DEG. TO PLUS 800 DEG. F) (S/S BY MIL-DTL-27536/1) (SUPERSEDING MS27114B)
V形带槽卡箍联轴器 1.750至14.250法兰OD （-65°至+800°F）（S/S BY MIL-DTL-2736/1）（替代MS27114B）
1997-04-03
MIL MIL-C-85449/1B
CLAMP ASSEMBLY, SADDLE TYPE, CUSHIONED, NBR RUBBER, 321 CRES, 275 DEG. F, FUEL RESISTANT, GENERAL PURPOSE (SUPERSEDING MIL-C-85449/1A) (S/S BY NASM85449/1-1998)
通用耐燃油321 CRES 275华氏度NBR橡胶缓冲鞍形卡箍组件（取代MIL-C-85449/1A）（S/S由NASM85449/1-1998提供）
1987-08-28
MIL MIL-DTL-52525/33B
Fittings, Wire Reinforced Hydraulic Hose and Clamp-Halves: Field Attachable (Reusable), Screw-on to 37 Degrees Flare Female Swivel, 90 Degrees Bent Tube, for use with Type 100RE Four-Spiral-Wrap Reinforcement Hose
配件、钢丝增强液压软管和对半卡箍:可现场连接（可重复使用） 旋入37度喇叭形内旋接头 90度弯管 用于100RE型四螺旋缠绕增强软管
2019-12-16
MIL MIL-DTL-52525/32B
Fittings, Hose, Reinforced Hydraulic Hose and Clamp-Halves: Field Attachable (Reusable), Screw-on to 37 Degrees Flare Female Swivel, 45 Degrees Bent Tube, for use with Type 100RE Four-Spiral-Wrap Reinforcement Hose
配件、软管、加强型液压软管和对半卡箍:可现场连接（可重复使用） 拧上37度喇叭形内旋接头 45度弯管 用于100RE型四螺旋缠绕加强软管
2019-12-16