CB 1298-1998
Pb-Sn-Cu三元合金减摩镀层技术要求和检验方法
Technical requirements and inspection methods for Pb-Sn-Cu alloy antifriction coating
1998-03-20
ASM Cu-724
TOUGHMET 2 - Spinodal Cu-Ni-Sn Alloy
TOUGHMET 2-调幅Cu-Ni-Sn合金
2004-09-01
ASM Cu-670
TOUGHMET 3 - Spinoidal Cu-Ni-Sn Alloy
TOUGHMET 3-纺锤状Cu-Ni-Sn合金
2001-07-01
ASM Cu-637
WRM ALLOY 4112 - Cu-Zn-Sn Alloy, Tin Brass
WRM合金4112-铜锌锡合金 锡黄铜
1999-07-01
ASM Cu-792
PMX ALLOY C14530: High Conductivity Cu-Sn-Te Alloy
PMX合金C14530:高导电性Cu-Sn-Te合金
2010-12-01
GB/T 39153-2020
亚稳分解强化铜-镍-锡合金棒材
Metastable decomposition strengthened Cu-Ni-Sn alloy rod
2020-10-11
KS D ISO 10713
보석류－금 합금 도금
珠宝 金合金镀层
2016-12-19
BS ISO 10713-1992
Jewellery. Gold alloy coatings
珠宝金合金镀层
1997-04-15
KS D ISO 10713(2021 Confirm)
보석류－금 합금 도금
珠宝金合金涂层
2016-12-19
GOST R 53196-2008
Ювелирные изделия. Покрытия сплавами на основе золота
首饰 金合金涂层
ISO 10713-2025
Jewellery and precious metals — Gold alloy coatings
珠宝和贵金属 金合金涂层
2025-02-27
QB/T 4187-2011
贵金属覆盖层饰品 装配通用技术条件
Precious metal alloy coatings jewellery--General technical requirements of assembly
2011-06-15
QB/T 4186-2011
贵金属覆盖层饰品 铸造通用技术条件
Precious metal alloy coatings jewellery--General technical requirements of casting
2011-06-15
QB/T 4188-2011
贵金属覆盖层饰品 电镀通用技术条件
Precious metal alloy coatings jewellery--General technical requirements of plating
2011-06-15
ISO 17650-2024
Low-alloyed steel — Determination of Mn, P, Cr, Ni, Mo, Co, Cu, V, Ti, As and Sn — Inductively coupled plasma optical emission spectrometric method
低合金钢化学分析方法电感耦合等离子体发射光谱法测定锰、磷、铬、镍、钼、钴、铜、钒、钛、砷和锡
2024-09-18
BS EN 10351-2011
Chemical analysis of ferrous materials. Inductively coupled plasma optical emission spectrometric analysis of unalloyed and low alloyed steels. Determination of Mn, P, Cu, Ni, Cr, Mo, V, Co, Al (total) and Sn [Routine method]
黑色金属材料的化学分析 非合金钢和低合金钢的电感耦合等离子体光发射光谱分析 锰、磷、铜、镍、铬、钼、钒、钴、铝（总）和锡的测定[常规法]
2011-03-31
DIN EN 10351
Chemical analysis of ferrous materials - Inductively coupled plasma optical emission spectrometric analysis of unalloyed and low alloyed steels - Determination of Mn, P, Cu, Ni, Cr, Mo, V, Co, Al (total) and Sn [Routine method]
黑色金属材料的化学分析.非合金钢和低合金钢的感应耦合等离子体光发射光谱分析.锰、磷、铜、镍、铬、钼、钒、钴、铝（总）和锡的测定[常规方法]
2011-05-01
BS EN 10355-2013
Chemical analysis of ferrous materials. Inductively coupled plasma optical emission spectrometric analysis of unalloyed and low alloyed steels. Determination of Si, Mn, P, Cu, Ni, Cr, Mo and Sn, following dissolution with nitric and sulphuric acids [Routine method]
黑色金属材料的化学分析 非合金钢和低合金钢的电感耦合等离子体光发射光谱分析 用硝酸和硫酸溶解后测定硅、锰、磷、铜、镍、铬、钼和锡[常规法]
2013-08-31
BS L 167-1978
Specification for close toleranced sheet and strip of aluminium-coated aluminium-copper-magnesium-silicon-manganese alloy (solution treated and artificially aged) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8)
镀铝铝铜镁硅锰合金（固溶处理和人工时效）精密公差薄板和带材规范（Cu 4.4 Mg 0.5 Si 0.8 Mn 0.8）
2002-04-05
BS L 166-1978
Specification for close toleranced sheet and strip of aluminium-coated aluminium-copper-magnesium-silicon-manganese alloy (solution treated and aged at room temperature) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8)
铝涂层铝-铜-镁-硅-锰合金（室温固溶处理和时效）的精密薄板和带材规范（Cu 4.4 Mg 0.5 Si 0.8 Mn 0.8）
2002-04-05