GB/T 34874.3-2017
产品几何技术规范（GPS） X射线三维尺寸测量机 第3部分：验收检测和复检检测
Geometrical product specifications (GPS)—X-ray three dimensional size measuring machines—Part 3：Acceptance and reverification tests
2017-11-01
JIS B 7440-3-2003
Geometrical Product Specifications (GPS) -- Acceptance and reverification tests for coordinate measuring machines (CMM) -- Part 3: CMM's with the axis of a rotary table as the fourth axis
产品几何量技术规范（GPS）三坐标测量机（CMM）的验收和再鉴定试验第3部分:以转台轴线为第四轴线的三坐标测量机
2003-01-01
KS B ISO 10360-3(2019 Confirm)
제품의 형상 명세(GPS) — 좌표 측정기 (CMM)의 인수 시험과 재검증 시험 — 제3부: 회전 테이블이 부착된 4축 좌표 측정기(CMM)
几何产品规格（Gps） - 坐标测量机的接受和再验证测试（Cmm） - 第3部分:旋转台轴作为第四轴
2014-12-29
KS B ISO 10360-3
제품의 기하형상 명세(GPS) — 좌표 측정기(CMM)의 인수 시험과 재검증 시험 — 제3부: 회전 테이블이 부착된 4축 좌표 측정기(CMM)
几何产品规范（GPS）——坐标测量机（CMM）的验收和再鉴定试验第3部分:以转台轴为第四轴的CMM
2024-12-27
GB/T 16857.3-2009
产品几何技术规范（GPS） 坐标测量机的验收检测和复检检测 第3部分：配置转台的轴线为第四轴的坐标测量机
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 3: CMMs with the axis of a rotary table as the fourth axis
2009-11-15
ISO 10360-3-2000
Geometrical Product Specifications (GPS) — Acceptance and reverification tests for coordinate measuring machines (CMM) — Part 3: CMMs with the axis of a rotary table as the fourth axis
几何产品规范（GPS）——坐标测量机（CMM）的验收和再鉴定试验第3部分:以转台轴为第四轴的CMM
2000-03-23
UNE-EN ISO 10360-3-2001
Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 3: CMMs with the axis of a rotary table as the fourth axis. (ISO 10360-3:2000)
产品几何技术规范（GPS）.坐标测量机（CMM）的验收和再验证试验.第3部分:以转台轴线为第四轴线的CMM （ISO 10360-3-2000）
2001-05-22
DIN EN 50411-3-2
Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 3-2: Singlemode mechanical fibre splice; German version EN 50411-3-2:2011
光纤通信系统中使用的光纤组织器和闭合器.产品规范.第3-2部分:单模机械光纤拼接；德文版EN 50411-3-2:2011
2012-01-01
BS 11/30248954 DC
BS EN 50411-2-3. Fibre organisers and closures to be used in optical fibre communication systems. Product specifications. Part 2-3. Sealed inline fibre splice closures Type 1, for category S & A
英国标准EN 50411-2-3 光纤通信系统中使用的光纤组织器和封盖 产品规格 第2-3部分 S&A类1型密封直列光纤拼接盒
2011-06-17
BS 06/30156201 DC
BS EN 50411-2-3. Fibre organisers and closures to be used in optical fibre communication systems. Product specifications. Part 2-3. Sealed inline fibre splice closures Type 1, for category S & A
英国标准EN 50411-2-3 光纤通信系统中使用的光纤组织器和封盖 产品规格 第2-3部分 S&A类1型密封直列光纤拼接盒
2006-09-20
DIN EN 50411-3-6
Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 3-6: Multimode mechanical fibre splice for use in an outdoor protected environment (Cat U); German version EN 50411-3-6:2013
光纤通信系统中使用的光纤组织器和封盖.产品规范.第3-6部分:室外保护环境用多模机械光纤拼接（U类）；德文版EN 50411-3-6:2013
2014-04-01
IEC 61076-8-100-2020
Connectors for electrical and electronic equipment - Product requirements - Part 8-100: Power connectors - Detail specification for 2-pole or 3-pole power plus 2-pole signal shielded and sealed connectors with plastic housing for rated current of 20 A
电气和电子设备用连接器.产品要求.第8-100部分:电源连接器.额定电流为20A的塑料外壳2极或3极电源加2极信号屏蔽和密封连接器详细规范
2020-04-09
IEC 61076-8-101-2020
Connectors for electrical and electronic equipment - Product requirements - Part 8-101: Power connectors - Detail specification for 2-pole or 3-pole power plus 2-pole signal shielded and sealed connectors with plastic housing for rated current of 40 A
电气和电子设备用连接器.产品要求.第8-101部分:电源连接器.额定电流为40A的塑料外壳的2极或3极电源加2极信号屏蔽和密封连接器详细规范
2020-04-09
IEC 61076-8-102-2020
Connectors for electrical and electronic equipment - Product requirements - Part 8-102: Power connectors - Detail specification for 2-pole or 3-pole power plus 2-pole signal shielded and sealed connectors with plastic housing for rated current of 150 A
电子设备连接器 - 产品要求 - 第8-102部分:电源连接器 - 2P或3P电源加2P信号屏蔽和密封连接器的详细规范 带塑料外壳 额定电流为150 A
2020-04-16