作废 YS/T 807.3-2012
铝中间合金化学分析方法 第3部分:镍含量的测定 EDTA滴定法 铝中间合金化学分析方法 第3部分:镍含量的测定 EDTA滴定法 Chemical analysis methods of aluminum hardeners-Part 3:Determination of nickel content-EDTA titrimetric method
发布日期:2012-11-07
实施日期:2013-03-01
分类信息
研制信息

归口单位: 全国有色金属标准化技术委员会(SAC/TC 243)

起草单位: 中国铝业股份有限公司郑州研究院、 中国有色金属工业标准计量质量研究所

起草人: 李文志、 张红霞、 李媛媛、 晁晓艳、 张颖、 姚永峰、 计春雷、 冷小薇、 侯向东

标准简介

本部分规定了铝中间合金中镍含量的测定方法。本部分适用于铝中间合金中镍含量的测定。测定范围:5.0%~25.0%

相似标准/计划/法规
HB/Z 5218.3-2004
铝合金化学分析方法 第3部分:邻菲啰啉光度法测定铁含量
Methods for chemical analysis of aluminium alloys -- Part 3: Determination of iron content by o-phenanthroline spectrophotometric method
2004-02-16
YS/T 1179.2-2017
铝渣化学分析方法 第2部分:金属铝含量的测定 气体容量法
Chemical analysis methods of aluminum slag-Part 2:Determination of metal aluminum-Gasometric method
2017-11-07
CB/T 4390.3-2013
螺旋桨用高锰铝青铜化学分析方法 第3部分:锰量的测定
Methods for chemical analysis of high manganese aluminum bronze for propeller — Part 3:Determination of manganese content
2013-12-31
YS/T 244.3-2008
高纯铝化学分析方法 第3部分:二安替吡啉甲烷-硫氰酸盐光度法测定钛含量
Chemical analysis methods of high purity aluminum—Part 3:Determination of titanium content by diantipyrylmethane-thiocyanate photometric method
2008-03-12
HB 20055.3-2011
铝合金化学铣切溶液分析方法 第3部分:碘量法测定硫化钠含量
Methods for analysis of chemical milling solutions for aluminum alloy-Part 3:Determination of sodium sulfide content by iodometry
2011-07-19
CB/T 4390.2-2013
螺旋桨用高锰铝青铜化学分析方法 第2部分:铝量的测定
Methods for chemical analysis of high manganese aluminum bronze for propeller — Part 2:Determination of aluminum content
2013-12-31
YS/T 738.3-2010
填料用氢氧化铝分析方法 第3部分:硫化物含量的测定
Analysis method for aluminum hydroxide for filler—Part 3:Determination method of sulphur
2010-11-22
HB 20055.1-2011
铝合金化学铣切溶液分析方法 第1部分:EDTA容量法测定铝含量
Methods for analysis of chemical milling solutions for aluminum alloy-Part 1:Determination of aluminum content by EDTA volumetric method
2011-07-19
YS/T 1179.1-2017
铝渣化学分析方法 第1部分:氟含量的测定 离子选择电极法
Chemical analysis methods of aluminum slag-Part 1:Determination of fluorine in aluminum slag-Ion selective electrode method
2017-11-07
JIS G 1314-3-2011
Method for chemical analysis of silicomanganese -- Part 3: Determination of carbon content
锰硅合金化学分析方法第3部分:碳含量的测定
2011-01-01
JIS G 1313-3-2012
Method for chemical analysis of ferrochromium -- Part 3: Determination of silicon content
铬铁化学分析方法第3部分:硅含量的测定
2012-01-01
JIS G 1318-3-2019
Method for chemical analysis of ferrovanadium -- Part 3: Determination of silicon content
钒铁化学分析方法第3部分:硅量的测定
2019-01-01
JIS G 1311-3-2012
Method for chemical analysis of ferromanganese -- Part 3: Determination of silicon content
锰铁化学分析方法第3部分:硅含量的测定
2012-01-01
KS D 1910-3
페로크로뮴 화학 분석 방법 — 제3부: 규소 함유량 정량
铬铁化学分析方法第3部分:硅量的测定
2023-12-20
JIS G 1312-3-2011
Method for chemical analysis of ferrosilicon -- Part 3: Methods for determination of phosphorus content
硅铁化学分析方法第3部分:磷含量的测定方法
2011-01-01
JIS G 1327-3-2010
Method for chemical analysis of ferroboron -- Part 3: Method for determination of silicon content
硼铁化学分析方法第3部分:硅含量的测定方法
2010-01-01
KS D 2075-3(2017 Confirm)
페로붕소의 분석 방법-제3부:규소 정량 방법
硼铁化学分析方法第3部分:硅量的测定方法
2012-03-09
KS D 1904-3
페로실리콘 화학 분석 방법 — 제3부: 인 함유량 정량 방법
硅铁化学分析方法第3部分:磷量的测定方法
2023-11-24
KS D 2075-3
페로붕소의 분석 방법 — 제3부: 규소 정량 방법
硼铁化学分析方法.第3部分:硅含量的测定方法
2022-10-31
YS/T 281.2-2011
钴化学分析方法 第2部分:铝量的测定 铬天青S分光光度法
Methods for chemical analysis of cobalt—Part 2:Determination of aluminum content—Chromeazurol S spectrophotometry
2011-12-20
化学分析合金测定含量方法

最后更新时间 2025-09-02