GOST 267-1973
Резина. Методы определения плотности
橡胶 密度测定方法
AS 3580.6.1-2011
Methods for sampling and analysis of ambient air, Method 6.1: Determination of ozone - Direct-reading instrumental method
环境空气取样和分析方法 方法6.1:臭氧的测定.直读仪器法
2011-08-09
KS M ISO 4637(2019 Confirm)
고무로 코팅된 천－고무와 천 사이의 접착강도 시험방법：직접인장법
橡胶涂层织物橡胶与织物粘合力的测定直接拉伸法
2009-09-04
BS 903-A27-1986
Physical testing of rubber-Determination of rubber to fabric adhesion. Direct tension method
橡胶的物理测试 橡胶与织物附着力的测定 直接拉伸法
1986-02-28
KS M ISO 4637(2024 Confirm)
고무로 코팅된 천－고무와 천 사이의 접착강도 시험방법：직접인장법
橡胶涂层织物橡胶与织物粘合力的测定直接拉伸法
2009-09-04
GOST 29063-1991
Ткани с резиновым покрытием. Определение прочности сцепления резины с тканью. Метод прямого натяжения
橡胶涂层织物 橡胶对织物粘合力的测定 直接张力法
GB/T 18946-2003
橡胶涂覆织物 橡胶与织物粘合强度的测定 直接拉力法
Rubber-coated fabrics--Determination of rubber-to-fabric adhesion--Direct tension method
2003-01-10
ISO 4637-1979
Rubber-coated fabrics — Determination of rubber-to-fabric adhesion — Direct tension method
橡胶涂层织物——橡胶与织物附着力的测定——直接拉伸法
1979-12-01
AS 1683.4-1992
Methods of test for elastomers, Method 4: Rubber, vulcanized - Determination of density
弹性体的试验方法 方法4:硫化橡胶.密度的测定
1992-08-10
AS 2365.2-1993
Methods for the sampling and analysis of indoor air, Method 2: Determination of carbon monoxide - Direct-reading portable instrument method
室内空气取样和分析方法 方法2:一氧化碳的测定.便携式直读仪器法
1993-01-18
BS 5293-2-1996
Sampling and testing carbon black for use in the rubber industry-Method for determination of pour density
橡胶工业用炭黑的取样和测试 浇注密度的测定方法
1996-05-15
ASTM D6814-24
Standard Test Method for Determination of Percent Devulcanization of Crumb Rubber Based on Crosslink Density
基于交联密度测定碎橡胶硫化百分比的标准试验方法
2024-05-01
GB/T 13748.21-2009
镁及镁合金化学分析方法 第21部分：光电直读原子发射光谱分析方法测定元素含量
Chemical analysis methods of magnesium and magnesium alloys - Part 21: Determination of elements by photoelectric direct reading atomic emission spectrometry
2009-04-15
AS/NZS 2891.14.1.1-2013
Methods of sampling and testing asphalt, Method 14.1.1: Field density tests - Determination of field density of compacted asphalt using a nuclear surface moisture-density gauge - Direct transmission mode
沥青取样和试验方法 方法14.1.1:现场密度试验-使用核表面水分密度计测定压实沥青的现场密度-直接传输模式
2013-07-10
AS/NZS 3580.11.1-2013
Methods for sampling and analysis of ambient air, Method 11.1: Determination of methane and non-methane organic compounds in ambient air - Direct-reading instrumental method
环境空气取样和分析方法 方法11.1:环境空气中甲烷和非甲烷有机化合物的测定-直读仪器法
2013-06-07
AS/NZS 3580.17-2016
Methods for sampling and analysis of ambient air, Method 17: Determination of gaseous compounds in ambient air - Direct-reading cavity ring-down spectroscopy instrumental method
环境空气取样和分析方法 方法17:环境空气中气态化合物的测定.直读腔衰荡光谱仪器法
2016-02-12
BS 2782-4-METHOD 452C-1979
Methods of testing plastics. Chemical properties-Determination of butyl rubber content of low density polyethylene compounds
塑料的试验方法 化学性质 低密度聚乙烯化合物中丁基橡胶含量的测定
1979-06-29
ISO 13741-1-2023
Plastics/rubber — Determination of residual monomers and other organic components by capillary-column gas chromatography — Part 1: Direct liquid injection method
塑料/橡胶.用毛细管柱气相色谱法测定残留单体和其他有机成分.第1部分:直接液体注射法
2023-01-26
KS M ISO 13741-1(2016 Confirm)
플라스틱/고무－중합체 분산물과고무 라텍스(천연 및 합성)－모세관 칼럼가스 크로마토그래피에 의한 잔류 단량체 및기타 유기 조성물의 측정－제1부：액체 직접 주입 방법
塑料/橡胶－聚合物分散体和橡胶胶乳（天然和合成）－毛细管柱气相色谱法测定残留单体和其他有机组分－第1部分:直接液体进样法
2006-12-27
KS M ISO 13741-1(2021 Confirm)
플라스틱/고무－중합체 분산물과고무 라텍스(천연 및 합성)－모세관 칼럼가스 크로마토그래피에 의한 잔류 단량체 및기타 유기 조성물의 측정－제1부：액체 직접 주입 방법
塑料/橡胶－聚合物分散体和橡胶胶乳（天然和合成）－毛细管柱气相色谱法测定残留单体和其他有机组分－第1部分:直接液体注射法
2006-12-27