SN/T 1296-2011
创建“国际卫生港口”规程
Code for establishing sanitary international port
2011-02-25
SN/T 2112.7-2008
重大国际活动出入境检验检疫规程 第7部分:口岸卫生监督
Exit-entry inspection and quarantine codes for key international events-Part 7:Port sanitary supervision
2008-07-24
3A 00-01-2018
3-A Sanitary Standard for General Requirements
3-A一般要求的卫生标准
2018-02-01
GB/T 44180-2024
厨卫五金产品通用技术要求
General technical requirements for kitchen and sanitary ware fittings
2024-06-29
IEEE/IEC 80005-1-2019
IEC/IEEE International Standard - Utility connections in port -- Part 1: High voltage shore connection (HVSC) systems -- General requirements
IEC/IEEE国际标准港口公用设施连接第1部分:高压岸电连接（HVSC）系统一般要求
2019-03-18
GB 16994.5-2024
港口作业安全要求 第5部分：件杂货物
Safety requirements for port operation—Part 5: General cargo
2024-06-25
GOST 12.1.005-1988
Система стандартов безопасности труда. Общие санитарно-гигиенические требования к воздуху рабочей зоны
职业安全标准体系 工作区空气的一般卫生要求
BS ISO 6149-4-2006
Connections for fluid power and general use. Ports and stud ends with ISO 261 metric threads and O-ring sealing. Dimensions, design, test methods and requirements for external and internal hex port plugs
流体动力和一般用途的连接 端口和螺柱端部采用ISO 261公制螺纹和O形密封圈 外部和内部六角端口插头的尺寸、设计、试验方法和要求
2006-06-30
GOST R 51813-2001
Услуги пассажирского морского транспорта. Услуги в морских портах. Общие требования
客运海运服务 海港服务一般要求
GB 16994.4-2023
港口作业安全要求 第4部分：普通货物集装箱
Safety requirements for port operation—Part 4: General cargo container
2023-09-08
BS EN ISO 6149-4-2017
Connections for fluid power and general use. Ports and stud ends with ISO 261 metric threads and O-ring sealing-Dimensions, design, test methods and requirements for external hex and internal hex port plugs
流体动力和一般用途的连接 带有ISO 261公制螺纹和O形密封圈的端口和螺柱端
2017-10-05
BS ISO 9974-4-2016
Connections for general use and fluid power. Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing-Dimensions, design, test methods and requirements for external hex and internal hex port plugs
一般用途和流体动力的连接 端口和螺柱端部采用ISO 261螺纹 采用弹性体或金属对金属密封
2016-12-31
SAE J1926/4_201008
Connector for Fluid Power and General Use - Ports and Stud End with ASME B1.1 Threads and O-Ring Seal - Part 4: External Hex and Internal Hex Inch Port Plugs - Dimensions, Design, Test Methods and Requirements
用于流体动力和一般用途的连接器 - 带Asme B1.1螺纹和O形密封圈的端口和螺栓端 - 第4部分:外部六角和内六角形英制端口插头 - 尺寸 设计 测试方法和要求
2010-08-05
ISO 6149-4-2017
Connections for fluid power and general use — Ports and stud ends with ISO 261 metric threads and O-ring sealing — Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs
用于流体动力和一般用途的连接 - ISO 261公制螺纹和O形密封圈的端口和螺柱端 - 第4部分:外部六角和内六角螺栓插头的尺寸 设计 测试方法和要求
2017-08-09
ISO 9974-4-2016
Connections for general use and fluid power — Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing — Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs
一般用途和流体动力的连接 - 具有ISO 261螺纹的端口和螺柱端头 具有弹性或金属对金属密封 - 第4部分:外部六角和内六角螺栓插头的尺寸 设计 测试方法和要求
2016-11-24
ITU-T U.200
The international telex service - General technical requirements for interworking
国际电传业务.互通的一般技术要求
1993-03-12
BS PD IEC/PAS 80005-3-2014
Utility connections in port-Low Voltage Shore Connection (LVSC) Systems. General requirements
端口中的公用设施连接
2014-11-30
NB/T 42009-2013
往复式内燃燃气发电机组 安全要求
Reciprocating internal combustion gas generating set--Safety requirement
2013-11-28
DIN 6280-10
Reciprocating internal combustion engines; generating sets with reciprocating internal combustion engines; small power generating sets; requirements and tests
往复式内燃机；带有往复式内燃机的发电机组；小型发电机组；要求和测试
1986-10-01
SN/T 2298.3-2009
进口可用作原料的固体废物检验检疫通用标准 第3部分：卫生除害处理通用技术要求
Inspection and quarantine general standard for imported solid wastes as raw materials-Part 3:General technical requirement of sanitary treatment and disinfestation
2009-07-07