GOST 3845-2017
Трубы металлические. Метод испытания внутренним гидростатическим давлением
金属管 内部静水压力试验方法
2017-02-28
GB/T 2836-1998
陶管水压试验方法
Test method for hydrostatic proof of vitrified clay pipe
1998-10-12
SY/T 7318.4-2018
油气输送管特殊性能试验方法 第4部分:全尺寸气体爆破试验
Standard test method for special properties of line pipe-Part 4: Full-scale gas burst testing
2018-10-29
GB/T 13465.6-2009
不透性石墨管水压爆破试验方法
Test method for hydraulic pressure bursting of impermeable graphite pipe
2009-04-29
GOST 25136-1982
Соединения трубопроводов. Методы испытаний на герметичность
管线连接 泄漏试验方法
ASTM D2837-24
Standard Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials or Pressure Design Basis for Thermoplastic Pipe Products
获得热塑性管材静水压设计基础或热塑性管产品压力设计基础的标准试验方法
2024-07-01
GB/T 32491-2016
玻璃纤维增强热固性树脂管及管件长期静水压试验方法
Test method for long-Term hydrostatic pressure of glass fiber reinforced thermosetting resin pipe and fittings
2016-02-24
AS/NZS 1462.29-2019
Methods of test for plastic pipes and fittings, Method 29: Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
塑料管道和配件的试验方法 方法29:塑料管道和管道系统.用外推法测定管形热塑性材料的长期静水压强度
2019-12-15
ASTM F2928-18(2023)
Standard Practice for Specimens and Testing Conditions for Testing Polyethylene (PE) Pipe Butt Fusions Using Tensile and Hydrostatic Test Methods
用拉伸和水压试验方法测试聚乙烯（PE）管对接熔合的试样和试验条件的标准实施规程
2023-02-01
AS/NZS 1462.10-1998
Methods of test for plastics pipes and fittings, Method 10: Method for hydrostatic pressure testing of fittings and elastomeric seal joints for non-pressure applications
塑料管道和配件的试验方法 方法10:非压力应用配件和弹性密封接头的静水压试验方法
1998-12-05
BS EN 15655-1-2018
Ductile iron pipes, fittings and accessories. Requirements and test methods for organic linings of ductile iron pipes and fittings-Polyurethane lining of pipes and fittings
球墨铸铁管、配件和附件 球墨铸铁管和配件有机衬里的要求和试验方法 管道和配件的聚氨酯衬里
2019-01-11
DIN EN 15655-1
Ductile iron pipes, fittings and accessories - Requirements and test methods for organic linings of ductile iron pipes and fittings - Part 1: Polyurethane lining of pipes and fittings
球墨铸铁管、配件和附件.球墨铸铁管和配件有机衬里的要求和试验方法.第1部分:管道和配件的聚氨酯衬里
2019-04-01
ASTM C828-23
Standard Test Method for Low-Pressure Air Test of Vitrified Clay Pipe Lines
陶土管道低压空气试验的标准试验方法
2023-02-01
BS EN 15655-2-2020
Ductile iron pipes, fittings and accessories. Requirements and test methods for organic linings of ductile iron pipes and fittings-Thermoplastic Acid Modified Polyolefin (TMPO) lining of pipes
球墨铸铁管、配件和附件 球墨铸铁管和配件有机衬里的要求和试验方法
2020-11-18
UNE-EN 15655-2009
Ductile iron pipes, fittings and accessories - Internal polyurethane lining for pipes and fittings - Requirements and test methods
球墨铸铁管、配件和附件.管道和配件的内部聚氨酯衬里.要求和试验方法
2009-11-18
UNE-EN 804-1995
PLASTICS PIPING SYSTEMS. INJECTION-MOULDED SOCKET FITTINGS FOR SOLVENT-CEMENTED JOINTS FOR PRESSURE PIPING. TEST METHOD FOR RESISTANCE TO A SHORT-TERM INTERNAL HYDROSTATIC PRESSURE.
塑料管道系统 压力管道溶剂胶结接头用注射成型承插接头 耐短期内部静水压力的试验方法
1995-09-18
UNE-EN 911-1996
PLASTICS PIPING SYSTEMS. ELASTOMERIC SEALING RING TYPE JOINTS AND MECHanical joints for thermoplastics pressure piping. Test method for leaktightness under external hydrostatic pressure.
塑料管道系统 热塑性压力管道用弹性密封环式接头和机械接头 外部静水压力下密封性的试验方法
1996-05-10
BS EN 804-1995
Plastics piping systems. Injection-moulded socket fittings for solvent-cemented joints for pressure piping. Test method for resistance to a short-term internal hydrostatic pressure
塑料管道系统 压力管道溶剂胶结接头用注射成型承插接头 耐短期内部静水压力的试验方法
1995-07-15
ISO 24131-1-2023
Internal protection by polymeric lining for ductile iron pipes — Requirements and test methods — Part 1: Polyurethane lining
球墨铸铁管用聚合物衬里的内部保护.要求和试验方法.第1部分:聚氨酯衬里
2023-03-31
ISO 24131-2-2023
Internal protection by polymeric lining for ductile iron pipes — Requirements and test methods — Part 2: Epoxy lining
球墨铸铁管用聚合物衬里的内部保护.要求和试验方法.第2部分:环氧衬里
2023-03-31