现行 SH 3173-2013
石油化工污水再生利用设计规范(附条文说明) 石油化工污水再生利用设计规范(附条文说明) Design specification for wastewater reclamation and reutilization\n in petrochemical industry
发布日期:2013-10-17
实施日期:2014-03-01
分类信息
研制信息

归口单位: 中国石油化工集团公司

起草单位: 中国石化工程建设有限公司、 中国石油化工股份有限公司北京化工研究院、 中石化宁波工程有限公司、 中石化上海工程有限公司

起草人: 韩艳萍、 邢希运、 冯景晓、 张玉国、 栾金义、 何小娟、 陈鑫、 王小红、 汪红、 蒙晓非

标准简介

本标准规定了石油化工污水再生利用工程的水源选择原则、再生水水质指标、系统组成、污水再生利用处理工艺和设施、再生处理设施的检测和控制、化验分析、辅助设施,以及安全设施等。本标准适用于石油化工企业及以煤为原料制取燃料和化工产品的企业新建、扩建或改建等污水再生利用工程设计

相似标准/计划/法规
CB/T 8533-2017
船厂中水回用工程设计规程
Specification for design of wastewater reclamation and reuse engineering in shipyard
2017-04-12
GB 50335-2016
城镇污水再生利用工程设计规范
Code for design of municipal wastewater reclamation and reuse
2016-08-18
AWWA MTC53835
Technical Issues in the Design of Membrane Process for Wastewater Reclamation
膜法污水回用工艺设计中的技术问题
2001-05-01
CB/T 8532-2017
船厂污水处理工程设计规程
Specification for design of wastewater engineering in shipyard
2017-04-12
SH/T 3015-2019
石油化工给水排水系统设计规范(附条文说明)
Specification of design for water & wastewater in petrochemical industry
2019-05-02
GB/T 26624-2011
畜禽养殖污水贮存设施设计要求
Design specifications for wastewater storage facility of animal farm
2011-06-16
SH 3034-2012
石油化工给水排水管道设计规范(附条文说明)
Specification for design of water supply and wastewater piping in petrochemical industry
2012-11-07
DIN 19569-5
Wastewater treatment plants - Principles for the design of structures and technical equipment - Part 5: Specific principles for plants for anaerobic wastewater treatment
废水处理厂.结构和技术设备的设计原则.第5部分:厌氧废水处理厂的特殊原则
2002-12-01
DIN 19569-3
Wastewater treatment plants - Principles for the design of structures and technical equipment - Part 3: Specific principles for the equipment for aerobical biological wastewater treatment
废水处理厂.结构和技术设备的设计原则.第3部分:有氧生物废水处理设备的特殊原则
2002-12-01
AWWA CSC91007
Planning, Design, Specification & Implementation of a Water/Wastewater SCADA System in an Integrated Computer System Environment
在综合计算机系统环境中规划、设计、规范和实施水/废水SCADA系统
1991-01-01
DIN 19569-10
Wastewater treatment plants - Principles for the design of structures and technical equipment - Part 10: Specific principles for the equipment for thermal sludge drying
废水处理厂.结构和技术设备的设计原则.第10部分:热污泥干燥设备的特殊原则
2017-02-01
ASTM C1802/C1802M-24
Standard Specification for Design, Testing, Manufacture, Selection, and Installation of Horizontal Fabricated Metal Access Hatches for Utility, Water, and Wastewater Structures
公用设施、水和废水构筑物用水平装配金属检修闸门的设计、试验、制造、选择和安装的标准规范
2024-12-01
DIN 19569-4
Wastewater treatment plants - Principles for the design of structures and technical equipment - Part 4: Specific principles for shutoff devices as penstocks, sluice gates, stoplogs etc.
废水处理厂.结构和技术设备的设计原则.第4部分:压力管道、水闸、叠梁闸门等关闭装置的特殊原则
2000-11-01
DIN 19569-8
Wastewater treatment plants - Principles for the design of structures and technical equipment - Part 8: Specific principles for the equipment for sewage treatment in granular media filter and granular fixed bed filter
废水处理厂.结构和技术设备的设计原则.第8部分:颗粒介质过滤器和颗粒固定床过滤器中污水处理设备的特殊原则
2005-06-01
条文污水再生利用

最后更新时间 2025-09-02