作废 YS/T 899-2013
高纯钽化学分析方法 痕量杂质元素的测定 辉光放电质谱法 高纯钽化学分析方法 痕量杂质元素的测定 辉光放电质谱法 Methods for chemical analysis of high purity tantalum - Determination of trace impurity element content - Glow discharge mass spectrometry
发布日期:2013-10-17
实施日期:2014-03-01
分类信息
研制信息

归口单位: 全国有色金属标准化技术委员会(SAC/TC 243)

起草单位: 北京有色金属研究总院、 金川集团股份有限公司、 东方电气集团峨嵋半导体材料有限公司

起草人: 李宝城、 刘英、 孙泽明、 童坚、 李继东、 臧慕文、 李娜、 程紫辉、 张江峰、 邱平、 秦芳林、 文英、 王攀峰

标准简介

本标准规定了高纯钽中痕量元素含量的测定方法。本标准适用于高纯钽中痕量元素含量的测定。除铌、钼、钨外各元素测定范围:1μg/kg~5000μg/kg,铌、钼和钨的测定范围:1μg/kg~100000μg/kg

相似标准/计划/法规
GB/T 15076.12-2008
钽铌化学分析方法 钽中磷量的测定
Methods for chemical analysis of tantalum and niobium - Determination of phosphorus content in tantalum
2008-03-31
YS/T 34.3-2011
高纯砷化学分析方法 极谱法测定硫量
Method for chemical analysis of the high-purity arsenic—Predicating method for determinating the concentration of sulfur
2011-12-20
YS/T 34.2-2011
高纯砷化学分析方法 极谱法测定硒量
Method for chemical analysis of the high-purity arsenic—Predicating method for determinating the concentration of selenium
2011-12-20
GB/T 17415.1-2010
钽矿石、铌矿石化学分析方法 第1部分:钽量测定
Methods for chemical analysis of tantalum and niobium ores - Part 1: Determination of tantalum content
2010-11-10
GB/T 23362.6-2009
高纯氢氧化铟化学分析方法 第6部分:灼减量的测定 称量法
Methods for chemical analysis of high purity indium hydroxide - Part 6: Determination of the loss on ignition - Gravimetric analysis
2009-03-19
GB/T 23364.6-2009
高纯氧化铟化学分析方法 第6部分:灼减量的测定 称量法
Methods for chemical analysis of high purity indium oxide - Part 6: Determination of the loss on ignition - Gravimetric analysis
2009-03-19
GB/T 15076.15-2008
钽铌化学分析方法 氢量的测定
Methods for chemical analysis of tantalum and niobium - Determination of hydrogen content
2008-03-31
GB/T 15076.14-2008
钽铌化学分析方法 氧量的测定
Methods for chemical analysis of tantalum and niobium - Determination of oxygen content
2008-03-31
YS/T 34.1-2011
高纯砷化学分析方法 电感耦合等离子体质谱法(ICP-MS)测定 高纯砷中杂质含量
Method for chemical analysis of the high-purity arsenic—Inductive coupling plasma mass spectrum (ICP-MS) for determinating the concentration of elements in the high-purity arsenic
2011-12-20
GOST 23116.5-1978
Кадмий высокой чистоты. Химико-спектральный метод определения таллия
镉高纯度 化学光谱法测定铊
GOST 22518.1-1977
Свинец высокой чистоты. Химико-спектральный метод определения примесей
高纯铅 化学光谱法测定添加物
YS/T 629.3-2007
高纯氧化铝化学分析方法 氧化钠含量的测定 火焰原子吸收光谱法
Chemical analysis methods of high purity alumina—Determination of sodium oxide—Flame atomic absorption spectrophotometric method
2007-04-13
YS/T 36.1-2011
高纯锡化学分析方法 第1部分:砷量的测定 砷斑法
Methods for chemical analysis of high-purity Tin—Part 1:Determination of arsenic content—Arsenic stain method
2011-12-20
YS/T 629.4-2007
高纯氧化铝化学分析方法 氧化钾含量的测定 火焰原子吸收光谱法
Chemical analysis methods of high purity alumina—Determination of potassium oxide—Flame atomic absorption spectrophotometric method
2007-04-13
YS/T 1288.2-2018
高纯锌化学分析方法 第2部分:铅、镉量的测定 极谱法
Methods for chemical analysis of high purity zinc-Part 2:Determination of lead,cadium contents-Polarography method
2018-10-22
GB/T 15076.8-2008
钽铌化学分析方法 碳量和硫量的测定
Methods for chemical analysis of tantalum and niobium - Determination of carbon and sulphur contents
2008-03-31
GB/T 15076.16-2008
钽铌化学分析方法 钠量和钾量的测定
Methods for chemical analysis of tantalum and niobium - Determination of sodium and potassium contents
2008-03-31
YS/T 244.4-2008
高纯铝化学分析方法 第4部分:丁基罗丹明B光度法测定镓含量
Chemical analysis methods of high purity aluminum—Part 4:Determination of gallium content by butylrhodamine B photometric method
2008-03-12
YS/T 244.7-2008
高纯铝化学分析方法 第7部分:二硫腙萃取光度法测定镉含量
Chemical analysis methods of high purity aluminum—Part 7:Determination of cadmium content by extraction-dithizone photometric method
2008-03-12
YS/T 244.3-2008
高纯铝化学分析方法 第3部分:二安替吡啉甲烷-硫氰酸盐光度法测定钛含量
Chemical analysis methods of high purity aluminum—Part 3:Determination of titanium content by diantipyrylmethane-thiocyanate photometric method
2008-03-12
化学分析辉光痕量杂质放电

最后更新时间 2025-09-02