JB/T 12034-2015
喷油嘴偶件可靠性考核 评定方法、试验方法及失效判定
Injector nozzle reliability test - Assessment methods,test methods and failure judgment
2015-10-10
JB/T 13425-2018
脱粒机 可靠性评定试验方法
Reliability assessment test methods for thresher
2018-04-30
EJ/T 802-2004
压水堆燃料组件管座焊缝检验X射线照相法
Test method for nozzle weld of PWR fuel assembly X-ray photo method
2004-02-16
JB/T 12033-2015
喷油泵柱塞偶件可靠性考核 评定方法、台架试验方法及失效判定
Plunger of fuel injection pump reliability test - Assessment methods,bench test methods and failure judgment
2015-10-10
JB/T 11222-2011
低速汽车 钢板弹簧可靠性试验方法
Low-speed vehicles — Test methods for reliability of Leaf spring assembly
2011-12-20
JB/T 12032-2015
喷油泵出油阀偶件可靠性考核 评定方法、台架试验方法及失效判定
Delivery valve of fuel injction pump reliability test - Assessment methods,bench test methods and failure judgment
2015-10-10
JB/T 11414-2013
合成式喷油泵总成可靠性考核 评定方法、台架试验方法、故障分类及判定规则
Integral drive pump reliability test — Assessment methods, bench test methods, failure type classification and judgment rules
2013-04-25
JB/T 11415-2013
分列式喷油泵总成可靠性考核 评定方法、台架试验方法、故障分类及判定规则
Fuel injection pump reliability test — Assessment methods, bench test methods, failure type classification and judgment rules
2013-04-25
JB/T 12031-2015
活塞式输油泵总成可靠性考核 评定方法、台架试验方法、故障分类及判定规则
Plunger type fuel feed pump reliability test - Assessment methods,bench test methods,failure type classification and judgment rules
2015-10-10
JB/T 12030-2015
柴油机喷油泵供油角度自动提前器总成可靠性 评定方法、试验方法、故障分类及判定规则
Automatic timing-advance of diesel fuel injection pump reliability test - Assessment methods,bench test methods,failure type classification and judgment rules
2015-10-10
UNE 21917-1995 IN
A METHOD FOR ASSESSING THE SHORT-CIRCUIT WITHSTAND STRENGTH OF PARTIALLY TYPE-TESTED ASSEMBLIES (PITA).
评估部分型式试验组件（PITA）短路耐受强度的方法
1995-10-16
BS 7767-1994
Method for assessing the short-circuit withstand strength of partially type-tested assemblies (PTTA)
部分型式试验组件（PTTA）的短路耐受强度评估方法
1994-07-15
UNE 20890-1995
A METHOD OF TEMPERATURE-RISE ASSESSMENT BY EXTRAPOLATION FOR PARTIALLY TYPE-TESTED ASSEMBLIES (PTTA) OF LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR.
通过外推对低压开关设备和控制设备的部分型式试验组件（PTTA）进行温升评估的方法
1995-06-08
UNE 20890/1M-1999
A METHOD OF TEMPERATURE-RISE ASSESSMENT BY EXTRAPOLATION FOR PARTIALLY TYPE-TESTED ASSEMBLIES (PTTA) OF LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR.
通过外推对低压开关设备和控制设备的部分型式试验组件（PTTA）进行温升评估的方法
1999-10-30
GOST R 53022.2-2008
Технологии лабораторные клинические. Требования к качеству клинических лабораторных исследований. Часть 2. Оценка аналитической надежности методов исследования (точность, чувствительность, специфичность)
临床实验室技术 临床实验室检查要求不高 第2部分评估方法分析可靠性（准确性 敏感性 特异性）
AS ISO 16003-2010
Components for fire extinguishing systems using gas - Requirements and test methods - Container valve assemblies and their actuators; selector valves and their actuators; nozzles; flexible and rigid connectors; and check valves and non-return valves
使用气体灭火系统的部件.要求和试验方法.容器阀门组件及其致动器；选择阀及其执行机构；喷嘴；柔性和刚性连接器；以及止回阀和止回阀
2010-03-25
AS 60890-2009
A method of temperature-rise assessment by extrapolation for partially type-test assemblies (PTTA) of low-voltage switchgear and controlgear (IEC 60890, Ed. 1.0 (1987) MOD)
低压开关设备和控制设备部分型式试验组件（PTTA）的外推温升评估方法（IEC 60890 Ed.1.0（1987）MOD）
2009-11-11
BS 06/30153237 DC
BS ISO 16003. Components for gaseous media and fire extinguishing systems. Requirements and test methods. Container valve assemblies and their actuators, selector valves and their actuators, nozzles, flexible connectors, and check valves and non-return valves
BS ISO 16003 气体介质和灭火系统的部件 要求和测试方法 容器阀门组件及其执行机构、选择阀及其执行机构、喷嘴、柔性接头、止回阀和止回阀
2006-07-14
DIN VDE 0660-507
A method of temperature-rise assessment by extrapolation for partially type-tested assemblies (PTTA) of low-voltage switchgear and controlgear (IEC 60890:1987 + Corrigendum 1988 + A1:1995); German version HD 528 S2:1997
低压开关设备和控制设备的部分型式试验组件（PTTA）的外推温升评估方法（IEC 60890-1987+勘误表1988+A1-1995）；德文版HD 528 S2:1997
1997-11-01