JB/T 7177.2-2015
精冲机 第2部分：技术条件
Fine blanking press - Part 2:Technical requirements
2015-10-10
JB/T 9175.1-2013
精密冲裁件 第1部分：结构工艺性
Fine blanked parts - Part 1:Structural processability
2013-12-31
GB/T 30572-2014
精密冲裁件 工艺编制原则
Fine blanked parts―Compiling rules of processes
2014-05-06
GB/T 30573-2014
精密冲裁件 通用技术条件
Fine blanked parts―General technical requirements
2014-05-06
VDI 2906 Sheet 5
Quality of cut faces of (sheet) metal parts after cutting, blanking, trimming or piercing; fine blanking (see also VDI 3345)
切割、下料、修整或穿孔后（板材）金属零件的切割面质量；精冲（另见VDI 3345）
1994-05-01
JB/T 7177.3-2015
精冲机 第3部分：精度
Fine blanking press - Part 3:Testing of the accuracy
2015-10-10
JB/T 7177.1-2015
精冲机 第1部分：型式与基本参数
Fine blanking press - Part 1:Types and basic parameters
2015-10-10
GB/T 41857-2022
金属板料精冲挤压复合成形件 通用技术条件
Sheet metal parts fabricated by fine blanking combined with extrusion process—General specification
2022-10-12
GB/T 37679-2019
金属板料精冲挤压复合成形件 工艺规范
Sheet metal parts fabricated by fine blanking combined with extrusion process—Technological specification
2019-06-04
GB 27995.2-2011
半成品眼镜片毛坯 第2部分：渐变焦眼镜片毛坯规范
Semi-finished spectacle lens blanks - Part 2: Specifications for progressive power lens blanks
2011-12-30
GB/T 41914.2-2022
微细气泡技术 微细气泡使用和测量通则 第2部分：微细气泡属性分类
Fine bubble technology—General principles for usage and measurement of fine bubbles—Part 2:Categorization of the attributes of fine bubbles
2022-12-30
ISO 20480-2-2018
Fine bubble technology — General principles for usage and measurement of fine bubbles — Part 2: Categorization of the attributes of fine bubbles
细气泡技术.细气泡的使用和测量的一般原则.第2部分:细气泡属性的分类
2018-11-15
JB/T 5564.2-2021
卧式精镗床 第2部分：精度检验
Horizontal fine boring machines—Part 2: Testing of the accuracy
2021-03-05
GB/T 2085.2-2019
铝粉 第2部分：球磨铝粉
Aluminium powder—Part 2：Inflammable fine aluminium powder
2019-06-04
KS B ISO 10322-2(2019 Confirm)
안광학－반제품 안경 렌즈－제2부：누진 굴절력 렌즈 블랭크를 위한 규정
眼科光学半成品眼镜镜片毛坯第2部分:渐进式焦度镜片毛坯规范
2004-12-30
ISO 24261-2-2021
Fine bubble technology — Elimination method for sample characterization — Part 2: Fine bubble elimination techniques
细气泡技术.样品表征的消除方法.第2部分:细气泡消除技术
2021-09-20
VDI 2906 Sheet 3
Quality of cut faces of (sheet) metal parts after cutting, blanking, trimming or piercing; sheaving
切割、下料、修整或穿孔后（板材）金属零件的切割面质量；谢文
1994-05-01
KS C IEC 60368-4-1(2017 Confirm)
검증된 품질의 압전필터 - 제4-1부 : 개별규격 - 능력인증
评定质量的压电滤波器 - 4-1部分:空白详细规范 - 能力鉴定
2002-12-30
VDI 2906 Sheet 4
Quality of cut faces of (sheet) metal parts after cutting, blanking, trimming or piercing; nibbling
切割、下料、修整或穿孔后（板材）金属零件的切割面质量；啃咬
1994-05-01
KS C IEC 60368-4-1(2022 Confirm)
검증된 품질의 압전필터 - 제4-1부 : 개별규격 - 능력인증
经质量评定的压电滤波器－第4－1部分:空白详细规范－能力批准
2002-12-30