SMPTE 311-2009
Television - Hybrid Electrical and Fiber Optical Camera Cable
电视-混合电气和光纤摄像机电缆
2009-06-04
IEC 60092-378-2024
Electrical installations in ships - Part 378: Optical fiber cables
船舶电气装置 第378部分:光纤电缆
2024-11-06
MIL MIL-DTL-24705/4A
Penetrators, Multiple Cable, Compact Rectangular Metal Frame and Blocks, Electrical and Fiber Optic Cable
贯穿件、多芯电缆、紧凑的矩形金属框架和模块、电气和光纤电缆
2014-05-27
LD/T 49.8-2016
电工电器 电线电缆制造规格为2芯至144芯层绞式通信用室外光缆劳动定额
Formulation of work quota of stranded loose tube optical fiber cables with 2 to 144 cores outdoor telecommunication cables for electrical equipment wire and cable manufacturing
2016-10-23
ASTM D5424-23a
Standard Test Method for Smoke Obscuration of Insulating Materials Contained in Electrical or Optical Fiber Cables When Burning in a Vertical Cable Tray Configuration
在垂直电缆槽结构中燃烧时电气或光纤电缆中所含绝缘材料烟雾遮蔽的标准试验方法
2023-05-01
IEEE 1428-2004
IEEE Guide for Installation Methods for Fiber Optic Cables in Electric Power Generating Stations and in Industrial Facilities
IEEE发电站和工业设施中光缆安装方法指南
2005-07-18
DL/T 5404-2007
电力系统同步数字系列(SDH)光缆通信工程设计技术规定(附条文说明)
Technical rule of electric power system engineering design for SDH optical fiber cable communication project
UL Subject 1277
Standard for Electrical Power and Control Tray Cables with Optional Optical-Fiber Members (Bulletin, 10/30/2015)
带可选光纤构件的电力和控制电缆槽标准（公告 10/30/2015）
2015-10-30
SJ 51428/14-2016
GTFJY7Y-SB1-2/3-3×19×0.32型光电复合系留缆详细规范
Detail specification for fiber optic and electric complex tethered cable of GTFJY7Y-3B1-2/3-3×19×0.32
2016-01-19
MIL MIL-S-24725/2 Notice 1-Cancellation
SWITCH, FIBER OPTIC, NONHARD MOUNTED, ELECTRICAL NONLATCHING; BYPASS, MULTIMODE CABLE, STAND-ALONE (METRIC) (NO S/S DOCUMENT)
开关 光纤 非安装 电气不连接;旁路 多模电缆 独立（公制）（无S/S文件）
1999-09-16
MIL MIL-S-24725/2
SWITCH, FIBER OPTIC, NONHARD MOUNTED, ELECTRICAL NONLATCHING; BYPASS, MULTIMODE CABLE, STAND-ALONE (METRIC) (NO S/S DOCUMENT)
非硬安装非闭锁式光纤开关；旁路 多模电缆 独立（公制）（无S/S文件）
1994-11-29
UL 1277 CRD
Standard for Electrical Power and Control Tray Cables with Optional Optical-Fiber Members (Certification Requirement Decision, 6/6/2016)
带可选光纤构件的电力和控制电缆槽标准（认证要求决定 2016年6月6日）
2016-06-06
UL Subject 1666
Standard for Test for Flame Propagation Height of Electrical and Optical-Fiber Cables Installed Vertically in Shafts (CSDS Proposal, 11/4/2016)
垂直安装在竖井中的电缆和光缆火焰传播高度试验标准（CSDS提案 2016年11月4日）
2016-11-04
IEEE 1222-2019
IEEE Standard for Testing and Performance for All-Dielectric Self-Supporting (ADSS) Fiber Optic Cable for Use on Electric Utility Power Lines
IEEE电力线路用全介质自支撑（ADSS）光缆的测试和性能标准
2020-03-31
YD/T 3718-2020
通信电缆光缆用低烟低卤阻燃软聚氯乙烯塑料
Low-smoke,low-halogen,flame-retardant and plasticized polyvinyl chloride (PVC) compounds for electrical and optical fiber cables in telecommunication applications
2020-04-16
ASTM D5537-23a
Standard Test Method for Heat Release, Flame Spread, Smoke Obscuration, and Mass Loss Testing of Insulating Materials Contained in Electrical or Optical Fiber Cables When Burning in a Vertical Cable Tray Configuration
在垂直电缆槽结构中燃烧时电气或光纤电缆中所含绝缘材料的热释放、火焰蔓延、烟雾遮蔽和质量损失试验的标准试验方法
2023-05-01
GB/T 19216.3-2021
在火焰条件下电缆或光缆的线路完整性试验 第3部分：火焰温度不低于830 ℃的供火并施加冲击振动，额定电压0.6/1 kV及以下电缆穿在金属管中进行的试验方法
Circuit integrity test for electric cables or optical fiber cables under fire conditions—Part 3: Test method for fire with shock at a temperature of at least 830 ℃ for cables of rated voltage up to and including 0.6/1 kV tested in a metal enclosure
2021-05-21
ASTM D6113-21
Standard Test Method for Using Cone Calorimeter to Determine Fire-Test-Response Characteristics of Insulating Materials Contained in Electrical or Optical Fiber Cables
用锥形量热计测定电缆或光缆中绝缘材料的燃烧试验响应特性的标准试验方法
2021-03-01
GB/T 19216.1-2021
在火焰条件下电缆或光缆的线路完整性试验 第1部分：火焰温度不低于830 ℃的供火并施加冲击振动，额定电压0.6/1 kV及以下外径超过20 mm电缆的试验方法
Circuit integrity test for electric cables or optical fiber cables under fire conditions—Part 1: Test method for fire with shock at a temperature of at least 830 ℃ for cables of rated voltage up to and including 0.6/1 kV and with an overall diameter exceeding 20 mm
2021-05-21
GB/T 19216.2-2021
在火焰条件下电缆或光缆的线路完整性试验 第2部分：火焰温度不低于830 ℃的供火并施加冲击振动，额定电压0.6/1 kV及以下外径不超过20 mm电缆的试验方法
Circuit integrity test for electric cables or optical fiber cables under fire conditions—Part 2: Test method for fire with shock at a temperature of at least 830 ℃ for cables of rated voltage up to and including 0.6/1 kV and with an overall diameter not exceeding 20 mm
2021-05-21