现行 JJG 808-2014
标准测力杠杆检定规程 标准测力杠杆检定规程 Standard Lever for Measuring Force
发布日期:2014-08-01
实施日期:2015-02-01
分类信息
研制信息

归口单位: 全国力值硬度计量技术委员会

起草单位: 常州市计量测试技术研究所、 江苏省计量科学研究院、 中国船舶重工集团公司第七零四研究所

起草人: 何建新、 赵峰、 张贵仁

标准简介

本规程适用于测量上限不大于6kN的不等臂标准测力杠杆(以下简称测力杠杆)的首次检定、后续检定和使用中检查。测量上限大于6kN的测力杠杆可参照本规程进行

相似标准/计划/法规
JB/T 5484-2010
杠杆式力标准机 技术条件
Specification for lever-amplification force standard machines
2010-02-21
ASTM E74-18e1
Standard Practices for Calibration and Verification for Force-Measuring Instruments
测力仪器校准和验证的标准实施规程
2018-02-01
ASTM F3109-23
Standard Practice for Verification of Multi-Axis Force Measuring Platforms
多轴测力平台验证的标准实施规程
2023-03-01
ASTM E2859-11(2023)
Standard Guide for Size Measurement of Nanoparticles Using Atomic Force Microscopy
使用原子力显微镜测量纳米颗粒尺寸的标准指南
2023-09-01
SAE AS7254
Standard Test Method for Measuring Forces During Dynamic Slicing of a Soft Projectile
2025-05-01
GOST R 8.877-2014
Государственная система обеспечения единства измерений. Меры электродвижущей силы (элементы нормальные) и меры напряжения. Методика поверки
国家体系的计量保证体系 电动势测量(标准电池)和直接电压测量 验证方法
GOST 14017-1968
Государственная система обеспечения единства измерений. Машины силоизмерительные образцовые 2-го разряда. Методы и средства поверки
确保测量一致性的状态系统 2级力测标准机 方法和验证手段
AASHTO TP 143-21(2023)
Standard Method of Test for Continuous Measurement of Sideway-Force Friction Number for Highway Pavements
公路路面侧向力摩擦数连续测量的标准试验方法
JIS B 7721-2009
Tension/compression testing machines -- Verification and calibration of the force-measuring system (Foreign Standard)
拉伸/压缩试验机测力系统的检定和校准(国外标准)
2009-01-01
ASTM F3756-25
Standard Practice for Grasp-Type Robot End-Effectors: Split Force Measurement Apparatus
抓持式机器人末端执行器的标准实施规程:分力测量装置
2025-03-15
ASTM F588-17(2023)
Standard Test Methods for Measuring the Forced Entry Resistance of Window Assemblies, Excluding Glazing Impact
测量窗户组件(不包括玻璃冲击)的强行进入阻力的标准试验方法
2023-05-01
SAE AS6940
Standard Test Method for Measuring Forces During Normal Impact of a Soft Projectile on a Rigid Flat Surface
软弹丸在刚性平面上正常撞击时测量力的标准试验方法
2021-03-23
SAE AS6999
Standard Test Method for Measuring Impact Forces and Pressures of a Soft Projectile on an Inclined Rigid Flat Surface
在倾斜的刚性平面上测量软射弹冲击力和压力的标准试验方法
2024-01-16
ASTM E601-20
Standard Guide for Measuring Electromotive Force (EMF) Stability of Base-Metal Thermoelement Materials With Time in Air
基础金属热电材料随时间测量电动势(emf)稳定性的标准指南
2020-11-01
ASTM F2052-21
Standard Test Method for Measurement of Magnetically Induced Displacement Force on Medical Devices in the Magnetic Resonance Environment
在磁共振环境中测量医疗设备上磁感应位移力的标准试验方法
2021-10-01
ASTM F842-17(2023)
Standard Test Methods for Measuring the Forced Entry Resistance of Sliding Door Assemblies, Excluding Glazing Impact
测量滑动门组件的强行进入阻力的标准试验方法 不包括玻璃冲击
2023-05-01
ASTM D8576-24
Standard Test Method for Measuring the Thread Length and Pull-off Force of a Lubricating Grease by using the Falex TAA Instrument
使用Falex TAA仪器测量润滑脂螺纹长度和拉脱力的标准试验方法
2024-07-01
ASTM D6264/D6264M-23
Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer-Matrix Composite to a Concentrated Quasi-Static Indentation Force
测量纤维增强聚合物基复合材料对集中准静态压痕力的抗损伤性的标准试验方法
2023-05-01
ASTM D5672/D5672M-22
Standard Test Method for Testing Flexible Cellular Materials Measurement of Indentation Force Deflection Using a 25-mm [1-in.] Deflection Technique
测试软质多孔材料的标准试验方法使用25毫米[1英寸]挠度技术测量压痕力挠度
2022-07-01
ASTM F3189-20
Standard Test Method for Measuring Force Reduction, Vertical Deformation, and Energy Restitution of Synthetic Turf Systems Using the Advanced Artificial Athlete
使用先进人造运动员测量合成草坪系统的力减小 垂直变形和能量恢复的标准测试方法
2020-11-01
测力检定杠杆

最后更新时间 2025-09-02