现行 HG/T 4622-2014
耐二甲醚橡胶密封材料 耐二甲醚橡胶密封材料 Rubber Compounds for seals used for dimethyl ether
发布日期:2014-05-06
实施日期:2014-10-01
分类信息
研制信息

归口单位: 全国橡胶与橡胶制品标准化技术委员会密封制品分技术委员会

起草单位: 云南煤化工应用技术研究院、 西北橡胶塑料研究设计院

起草人: 杨魁、 雷海军

标准简介

本标准规定了耐二甲醚橡胶密封材料的要求、检验规则、标志、包装、运输、贮存等。本标准适用于耐二甲醚的橡胶密封材料,也适用于耐液化石油气二甲醚混合液的橡胶密封材料

相似标准/计划/法规
ISO 9553-1997
Solar energy — Methods of testing preformed rubber seals and sealing compounds used in collectors
太阳能——集热器用预制橡胶密封件和密封化合物的试验方法
1997-10-16
MIL MIL-S-48112
SEALING COMPOUND BUTYL RUBBER SEALANT (FOR USE IN AMMUNITION) (NO S/S DOCUMENT)
密封化合物丁基橡胶密封剂(用于弹药)(无S/S文件)
1972-07-16
SAE AMS1389
Sealing Compound, Polythioether Rubber, Light-Cured, for Integral Fuel Tanks and General Purpose, Intermittent use to 360 °F (182 °C)
光固化聚硫醚橡胶密封化合物 用于整体式燃油箱和一般用途 间歇使用至360°F(182°C)
2022-04-25
SAE AMS3265F
Sealing Compound, Polysulfide (T) Rubber, Fuel Resistant, Non-Chromated Corrosion Inhibiting For Intermittent Use to 360 °F (182 °C)
密封胶 聚硫(T)橡胶 耐燃料 非铬酸盐腐蚀抑制 可间歇使用至360°F(182°C)
2020-09-09
SAE AMS3277L
Sealing Compound, Polythioether Rubber, Fast Curing for Integral Fuel Tanks and General Purpose, Intermittent Use to 360 °F (182 °C)
密封化合物 聚硫醚橡胶快速固化 适用于整体式燃油箱和通用型 间歇使用至360°F(182°C)
2024-06-28
ASTM D8059-19(2022)
Standard Test Method for Rubber Compounds—Measurement of Unvulcanized Dynamic Strain Softening (Payne Effect) Using Sealed Cavity Rotorless Shear Rheometers
用密封腔无转子剪切流变仪测量橡胶化合物未硫化动态应变软化(Payne效应)的标准试验方法
2022-11-01
SAE AMS3262A
Sealing Compound, Silicone Rubber, Two-Part, Electrically Conductive and Corrosion Resistant (Nonchromated) for Use from -67 to 500°F (-55 to 260°C)
在-67至500°F(-55至260°C)温度范围内使用的双组分导电耐腐蚀(非着色)硅橡胶密封化合物
2011-09-23
SAE AMS3269C
Sealing Compound, Polysulfide (T) Synthetic Rubber for Integral Fuel Tank and Fuel Cell Cavities High Strength, for Intermittent Use to 360°F (182°C)
密封化合物 聚硫(T)合成橡胶 用于整体燃料箱和燃料电池腔高强度 可在360°F(182°C)下间歇使用
2011-09-23
SAE AMS3281G
Sealing Compound, Polysulfide (T) Synthetic Rubber for Integral Fuel Tank and Fuel Cell Cavities, Low Density for Intermittent Use to 360 °F (182 °C)
密封化合物 聚硫(T)合成橡胶 用于整体燃料箱和燃料电池腔 低密度 可在360°F(182°C)下间歇使用
2022-06-13
SAE AMS3102A
Sealing Compound, Polythioether Rubber, Fast Curing, Light Weight (Specific Gravity 0.78, Max) for Integral Fuel Tanks and General Purpose, Intermittent Use to 360 °F (182 °C)
密封化合物 聚硫醚橡胶快速固化 重量轻(比重0.78 最大值) 适用于整体式燃油箱和一般用途 间歇使用至360°F(182°C)
2022-01-17
橡胶密封材料二甲醚

最后更新时间 2025-09-02