现行 SJ/T 11475-2014
紫外光固化光纤涂料 紫外光固化光纤涂料 UV curable coating for optical fibre
发布日期:2014-10-14
实施日期:2015-04-01
分类信息
研制信息

归口单位: 工业和信息化部电子工业标准化研究院

起草单位: 湖北省化学研究院、 帝斯曼迪索特种化学(上海)有限公司

起草人: 余万能、 彭长征

标准简介

本标准规定了通信用双涂层石英玻璃光纤紫外光(UV)固化光纤涂料的分类、技术要求、检验方法、检验规则、标志、包装、运输及储存等。本标准不适用于单涂层、有色涂层和特种光纤涂层

相似标准/计划/法规
MIL MIL-PRF-24793A
ADHESIVE, UV CURABLE, ONE PART, FIBER OPTICS (SUPERSEDING MIL-PRF-24793)
光纤单组份紫外光固化粘合剂(替代MIL-PRF-24793)
2001-12-27
MIL MIL-PRF-24793A Notice 1-Validation
ADHESIVE, UV CURABLE, ONE PART, FIBER OPTICS (SUPERSEDING MIL-PRF-24793)
粘合剂 紫外线固化 一体式 光纤(取代MIL-PRF-24793)
2007-01-22
BS EN IEC 60793-1-32-2018
Optical fibres-Measurement methods and test procedures. Coating strippability
光纤
2019-01-11
BS EN 60793-1-21-2002
Optical fibres. Measurement methods and test procedures-Coating geometry-Section 21 Coating geometry
光纤 测量方法和试验程序
2002-05-17
GB/T 20186.3-2023
光纤用二次被覆材料 第3部分:改性聚碳酸酯
Secondary coating materials used for optical fibre—Part 3: Modified polycarbonate
2023-12-28
BS EN 50289-4-17-2015
Communication cables. Specifications for test methods-Test methods for UV resistance evaluation of the sheath of electrical and optical fibre cable
通讯电缆 试验方法规范
2015-11-30
KS C IEC 60793-1-32
광섬유 — 제1-32부: 코팅 탈리성의 측정방법 및 시험절차
光纤 - 第1-32部分:测量方法和测试程序 - 涂层剥离性
2020-12-23
GOST R IEC 60793-1-32-2010
Волокна оптические. Часть 1-32. Методы измерений и проведение испытаний. Снятие защитного покрытия
光纤 第1-32部分 测量方法和测试程序 涂层剥离性
GOST R IEC 60793-1-21-2012
Волокна оптические. Часть 1-21. Методы измерений и проведение испытаний. Геометрия покрытия
光纤 第1-21部分 测量方法和测试程序 涂层几何
GB/T 20186.2-2021
光纤用二次被覆材料 第2部分:改性聚丙烯
Secondary coating materials used for optical fibre—Part 2: Modified propylene resin
2021-10-11
IEC 60793-1-21-2001
Optical fibres - Part 1-21: Measurement methods and test procedures - Coating geometry
光纤第1-21部分:测量方法和试验程序涂层几何
2001-08-30
IEC 60793-1-32-2018
Optical fibres - Part 1-32: Measurement methods and test procedures - Coating strippability
光纤 - 第1-32部分:测量方法和测试程序 - 涂层剥离性
2018-11-16
IEC 60793-1-32-2018 RLV
Optical fibres - Part 1-32: Measurement methods and test procedures - Coating strippability
光纤第1-32部分:测量方法和试验程序涂层可剥离性
2018-11-16
YD/T 1118.1-2019
光纤用二次被覆材料 第1部分:聚对苯二甲酸丁二醇酯
Secondary coating materials used for loose tube of optical fibre-Part 1: Polybutylene terephthalate
2019-11-11
GB/T 15972.21-2008
光纤试验方法规范 第21部分:尺寸参数的测量方法和试验程序 涂覆层几何参数
Specifications for optical fibre test methods - Part 21: Measurement methods and test procedures for dimensions - Coating geometry
2008-03-31
GB/T 15972.32-2021
光纤试验方法规范 第32部分:机械性能的测量方法和试验程序 涂覆层可剥性
Specifications for optical fibre test methods—Part 32: Measurement methods and test procedures for mechanical characteristics—Coating strippability
2021-10-11
BS 09/30199219 DC
BS EN 60793-1-32. Optical fibres. Part 1-32. Measurement methods and test procedures. Coating strippability
英国标准EN 60793-1-32 光纤 第1-32部分 测量方法和测试程序 涂层剥离性
2009-01-30
DIN IEC 60793-1-32-DRAFT
Draft Document - Optical fibres - Part 1-32: Measurement methods and test procedures - Coating strippability (IEC 86A/1263/CD:2009)
文件草案.光纤.第1-32部分:测量方法和试验程序.涂层可剥离性(IEC 86A/1263/CD:2009)
2009-05-01
VDE 0819-289-4-17/DIN EN 50289-4-17
Communication cables - Specifications for test methods Part 4-17: Test methods for UV resistance evaluation of the sheath of electrical and optical fibre cable; German version EN 50289-4-17:2011
通信电缆.试验方法规范.第4-17部分:电缆和光缆护套抗紫外线评估的试验方法;德文版EN 50289-4-17:2011
2011-10-01
DIN EN 60793-1-21
Optical fibres - Part 1-21: Measurement methods and test procedures; Coating geometry (IEC 60793-1-21:2001); German version EN 60793-1-21:2002
光纤.第1-21部分:测量方法和试验程序;涂层几何形状(IEC 60793-1-21-2001);德文版EN 60793-1-21:2002
2002-11-01
涂料固化光纤

最后更新时间 2025-09-02