现行 YS/T 991-2014
铜阳极泥 铜阳极泥 Copper anode mud
发布日期:2014-10-14
实施日期:2015-04-01
分类信息
研制信息

归口单位: 全国有色金属标准化技术委员会(SAC/TC 243)

起草单位: 大冶有色金属有限责任公司、 阳谷祥光铜业有限公司

起草人: 张泽林、 胡新平、 马登峰、 周松林、 李东林、 吕喜聪、 董效林、 胡忠东、 李伟、 陈迎武、 洪雄文、 王佑方、 李静、 谢太李、 吴墨泉

标准简介

本标准规定了铜阳极泥的要求、试验方法、检验规则、包装、质量预报单或合同中(或订货单)等内容。本标准适用于由铜阳极在电解精炼过程中产生的不溶性物质,供提炼贵金属和其它有价元素使用

相似标准/计划/法规
GB/T 39778-2021
铜阳极泥回收利用技术规范
Technical specification for recycling and utilization of copper anode mud
2021-03-09
YS/T 992-2014
铅阳极泥
Lead anode mud
2014-10-14
DIN EN 12496
Galvanic anodes for cathodic protection in seawater and saline mud
用于海水和盐水泥浆中阴极保护的电偶阳极;德文版EN 12496:2013
2014-02-01
BS EN 12496-2013
Galvanic anodes for cathodic protection in seawater and saline mud
用于海水和盐水泥浆中阴极保护的电偶阳极
2013-06-30
YS/T 1083-2015
阳极铜
Anode copper
2015-04-30
T/CPCA 4305A-2013
磷铜阳极
Phos-copper anodes
2013-07-01
GB/T 20302-2014
阳极磷铜材
Phosphor-copper anodes
2014-12-05
YS/T 912-2013
阳极纯铜粒
Anode pure copper shot
2013-10-17
CID A-A-51144
ANODES, COPPER (NO S/S DOCUMENT)
铜阳极(无S/S文件)
1985-05-03
FED QQ-A-673B Notice 1-Cancellation
ANODES, COPPER (S/S BY A-A-51144)
铜阳极(S/S由A-A-51144提供)
1987-12-30
GB/T 23607-2009
铜阳极泥化学分析方法 砷、铋、铁、镍、铅、锑、硒、碲量的测定 电感耦合等离子体原子发射光谱法
Methods for chemical analysis of copper anode mud - Determination of arsenic,bismuth,iron,nickel,lead,antimony,selenium and tellurium content - Inductively coupled plasma-atomic emission spectrometry
2009-04-15
GB/T 33140-2016
集成电路用磷铜阳极
Phosphorized copper anode used for integrated circuit
2016-10-13
SJ 21292-2018
印制板用磷铜阳极规范
Specification of phosphor copper anode for printed circuit boards
2018-01-18
JIS H 8689-2013
Anodizing of aluminium and its alloys -- Check for continuity of thin anodic oxidation coatings -- Copper sulfate test
铝及铝合金阳极氧化薄阳极氧化膜连续性检验硫酸铜试验
2013-01-01
BS EN ISO 2085-2018
Anodizing of aluminium and its alloys. Check for continuity of thin anodic oxidation coatings. Copper sulfate test
铝及其合金的阳极氧化 检查薄阳极氧化涂层的连续性 硫酸铜试验
2018-10-05
GB/T 8752-2006
铝及铝合金阳极氧化 薄阳极氧化膜连续性检验方法 硫酸铜法
Anodizing of aluminium and its alloys - Check of continuity of thin anodic oxide coating - Copper sulphate test
2006-09-26
ISO 2085-2018
Anodizing of aluminium and its alloys — Check for continuity of thin anodic oxidation coatings — Copper sulfate test
铝及其合金阳极氧化 - 检查薄阳极氧化涂层的连续性 - 硫酸铜试验
2018-08-22
UNE-EN 12373-16-2002
Aluminium and aluminium alloys. Anodizing. Part 16: Check for continuity of thin anodic oxidation coatings. Copper sulfate test.
铝和铝合金 阳极氧化 第16部分:检查薄阳极氧化涂层的连续性 硫酸铜试验
2002-04-16
GB/T 2056-2005
电镀用铜、锌、镉、镍、锡阳极板
Copper、zinc、cadmium、nickel、tin anode sheets for electric plating
2005-07-26
YS/T 745.1-2010
铜阳极泥化学分析方法 第1部分:铜量的测定 碘量法
Methods for chemical analysis of copper anode slime—Part 1:Determination of copper content—Iodine titration method
2010-11-22
阳极

最后更新时间 2025-09-02