UNE-EN 15385-2007
Packaging - Flexible laminate tubes - Test methods to determine the strength of the head welding
包装.挠性层压管.测定头部焊接强度的试验方法
2007-12-12
DIN EN 15385
Packaging - Flexible laminate tubes - Test methods to determine the strength of the head welding
包装.挠性层压管.测定头部焊接强度的试验方法；德文版EN 15385:2007
2007-11-01
BS EN 15385-2007
Packaging. Flexible laminate tubes. Test methods to determine the strength of the head welding
包装材料挠性层压管 测定封头焊接强度的试验方法
2007-09-28
WRC 079
Welding Ultra High Strength Steel Sheet
焊接超高强度钢板
MSS SP-75-2019
High-Strength, Wrought, Butt-Welding Fittings
高强度锻造对焊配件
BS PD ISO/TS 20273-2017
Guidelines on weld quality in relationship to fatigue strength
与疲劳强度相关的焊接质量指南
2017-09-15
ISO/TS 20273-2017
Guidelines on weld quality in relationship to fatigue strength
焊接质量指标与疲劳强度的关系
2017-08-18
ASTM D8172/D8172M-18(2023)e1
Standard Test Method for Shear and Peel Strength of Solvent-Welded Seams with Nonreinforced Geomembranes
无增强土工膜溶剂焊接接缝剪切和剥离强度的标准试验方法
2023-05-01
SAE J2614_201801
Welded and Cold-Drawn, High Strength (500 MPa Tensile Strength) Hydraulic Tubing, for Bending, Flaring, Cold Forming, Welding and Brazing
焊接和冷拔高强度（500兆帕抗拉强度）液压管 用于弯曲、扩口、冷成型、焊接和钎焊
2018-01-10
AS/NZS 1554.4-2010
Structural steel welding, Part 4: Welding of high strength quenched and tempered steels
结构钢焊接第4部分:高强度淬火和回火钢的焊接
2010-03-11
AS/NZS 1554.4-2014
Structural steel welding, Part 4: Welding of high strength quenched and tempered steels
结构钢焊接第4部分:高强度淬火和回火钢的焊接
2014-11-25
JIS G 3128-2021
High yield strength steel plates for welded structure
焊接结构用高屈服强度钢板
2021-01-01
KS D 3611
용접 구조용 고항복점 강판
銲接结构用高降伏强度钢板
2016-12-05
WRC 320
Welding Metallurgy and Weldability of High-Strength Aluminum Alloys
高强度铝合金的焊接冶金与焊接性
WRC 161
The Fabrication and Welding of High-Strength Line-Pipe Steels
高强度管线钢的制造与焊接
KS D 3611(2021 Confirm)
용접 구조용 고항복점 강판
焊接结构用高屈服强度钢板
2016-12-05
JB/T 13635-2020
电触头元件焊接强度测试方法
Method of measurement of welding strength of electrical contact assembly
2020-04-16
SAE J2613_201710
Welded Flash Controlled, High Strength (500 MPa Tensile Strength) Hydraulic Tubing, for Bending, Double Flaring, Cold Forming, Welding, and Brazing
焊接闪光控制 高强度（500MPa拉伸强度）液压管 用于弯曲 双扩口 冷成型 焊接和钎焊
2017-10-12
UNE-EN 757-1997
WELDING CONSUMABLES. COVERED ELECTRODES FOR MANUAL METAL ARC WELDING OF HIGH STRENGTH STEELS. CLASSIFICATION.
焊接耗材 高强度钢手工金属电弧焊用覆盖焊条 分类
1997-08-11
KS B ISO 18275
용접 재료 — 고장력강의 수동 아크 용접용 피복봉 — 분류
焊接耗材 - 高强度钢的手动金属电弧焊接覆盖电极 - 分类
2019-12-24