现行 NB/T 47013.1-2015
承压设备无损检测 第1部分:通用要求 承压设备无损检测 第1部分:通用要求 Nondestructive testing of pressure equipments - Part 1:General requirements
发布日期:2015-04-02
实施日期:2015-09-01
分类信息
研制信息

归口单位: 全国锅炉压力容器标准化技术委员会

起草单位: 中国特种设备检测研究院

起草人: 林树青

标准简介

NB/T 47013的本部分规定了射线检测、超声检测、磁粉检测、渗透检测、涡流检测、泄漏检测、目视检测、声发射检测、衍射时差法超声检测、X射线数字成像检测、漏磁检测和脉冲涡流检测等无损检测方法的一般要求和使用原则。本部分适用于在制和在用金属材料制承压设备的无损检测

相似标准/计划/法规
GB/T 34370.1-2017
游乐设施无损检测 第1部分:总则
Nondestructive testing of amusement equipments—Part 1:General requirement
2017-09-29
JB/T 12530.1-2015
塑料焊缝无损检测方法 第1部分:通用要求
Nondestructive testing of weld joint of thermoplastics - Part 1:General requirements
2015-10-10
GB/T 33488.1-2017
化工用塑料焊接制承压设备检验方法 第1部分:总则
Test method of pressure equipments of thermoplastics welded for chemicals—Part 1: General requirements
2017-02-28
GB/T 713.1-2023
承压设备用钢板和钢带 第1部分:一般要求
Steel plate,sheet and strip for pressure equipments—Part 1:General requirements
2023-08-06
GB/T 29459.1-2012
在役承压设备金属材料小冲杆试验方法 第1部分:总则
Small punch test methods of metallic materials for in-service pressure equipments - Part 1:General requirements
2012-12-31
UNE-EN 14276-1-2007
Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements
制冷系统和热泵用压力设备.第1部分:容器.一般要求
2007-06-27
GB/T 44148.1-2024
承压设备用钢锻件、轧制或锻制钢棒 第1部分:一般要求
Steel forgings and rolled or forged bars for pressure equipments—Part 1: General requirements
2024-06-29
GB/T 32710.1-2016
环境试验仪器及设备安全要求 第1部分:总则
Safety requirements for environmental testing and conditioning equipment—Part 1: General requirements
2016-06-14
ISO 9393-1-2004
Thermoplastics valves for industrial applications — Pressure test methods and requirements — Part 1: General
工业用热塑性塑料阀门——压力试验方法和要求第1部分:概述
2004-06-29
IEC TS 62885-1-2020 RLV
Surface cleaning appliances - Part 1: General requirements on test material and test equipment
表面清洁器具.第1部分:试验材料和试验设备的一般要求
2020-10-19
IEC TS 62885-1-2020
Surface cleaning appliances - Part 1: General requirements on test material and test equipment
表面清洁器具.第1部分:试验材料和试验设备的一般要求
2020-10-19
UNE-EN 13451-1-2001
Swimming pool equipment - Part 1: General safety requirements and test methods.
游泳池设备.第1部分:一般安全要求和试验方法
2001-10-30
UNE-EN 13277-1-2001
PROTECTIVE EQUIPMENT FOR MARTIAL ARTS. PART 1: GENERAL REQUIREMENTS AND TEST METHODS.
武术防护装备 第1部分:一般要求和试验方法
2001-05-31
UNE-EN 1176-1-2009
Playground equipment and surfacing - Part 1: General safety requirements and test methods
游乐场设备和铺面.第1部分:一般安全要求和试验方法
2009-02-04
UL 61496-1
Standard for Electro-Sensitive Protective Equipment, Part 1: General Requirements and Tests
电敏感防护设备标准第1部分:一般要求和试验
2021-02-09
UNE-EN 957-1-2005
Stationary training equipment - Part 1: General safety requirements and test methods
固定式训练设备第1部分:一般安全要求和试验方法
2005-12-21
DIN EN 1176-1
Playground equipment and surfacing - Part 1: General safety requirements and test methods
游乐场设备和铺面.第1部分:一般安全要求和试验方法
2017-12-01
DIN EN 957-1
Stationary training equipment - Part 1: General safety requirements and test methods
固定式训练设备第1部分:一般安全要求和试验方法
2005-11-01
KS G 5821-1
수영장 시설 — 제1부: 일반 안전 요구사항 및 시험방법
游泳池设备 - 第1部分:一般安全要求和测试方法
2020-12-28
KS G ISO 20957-1
고정식 운동기구 — 제1부: 일반 안전 요구사항 및 시험방법
固定式培训设备第1部分:一般安全要求和测试方法
2020-12-28
无损检测设备

最后更新时间 2025-09-02