现行 JB/T 12464-2015
无损检测 机翼数字射线成像检测方法 无损检测 机翼数字射线成像检测方法 Non-destructive testing - Test method for digital radiographic testing of wings
发布日期:2015-10-10
实施日期:2016-03-01
分类信息
研制信息

归口单位: 全国无损检测标准化技术委员会

起草单位: 中国商用飞机有限责任公司上海飞机设计研究院、 上海暨懋科技有限公司、 上海泰司检测科技有限公司

起草人: 冯剑飞、 李明仁、 王海、 章怡明

标准简介

本标准规定了使用平板探测器对飞机机翼X射线数字成像检测的一般要求。本标准适用于检测飞机机翼金属结构的疲劳裂纹,复合材料结构的裂纹、蜂窝压塌、蜂窝积水等损伤,以及机翼装配后翼盒内多余物和装配正确性检查

相似标准/计划/法规
GB/T 43613-2023
无损检测 数字射线检测图像处理与通信
Non-destructive testing—Image processing and communication of digital radiographic testing
2023-12-28
UNE-EN 12679-2000
NON-DESTRUCTIVE TESTING. DETERMINATION OF THE SIZE OF INDUSTRIAL RADIOGRAPHIC SOURCES. RADIOGRAPHIC METHOD.
无损检测 工业射线源尺寸的测定 射线照相法
2000-04-29
JIS Z 3110-2017
Non-destructive testing of welded joints -- Methods of radiographic testing for X- and gamma-ray techniques with digital detectors
焊接接头无损检测数字探测器X射线和伽马射线技术射线检测方法
2017-01-01
GB/T 28266-2012
承压设备无损检测 射线胶片数字化系统的鉴定方法
Non-destructive testing of pressure equipment - Qualification of radiographic film digitization systems
2012-05-11
GB/T 23910-2009
无损检测 射线照相检测用金属增感屏
Non-destructive testing - Metal intensifying screens for radiographic testing
2009-05-26
GB/T 12604.2-2005
无损检测 术语 射线照相检测
Non-destructive testing-Terminology-Terms used in radiographic testing
2005-09-19
JB/T 13156-2017
无损检测 工业射线照相底片光学密度的测定方法
Non-destructive testing一Test method for determining the density of industrial radiographs
2017-04-12
BS EN 12679-2018
Non-destructive testing. Radiographic testing. Determination of the size of industrial radiographic gamma sources
无损检测 射线检测 工业射线照相γ源尺寸的测定
2018-11-09
ISO 32679-2024
Non-destructive testing — Radiographic testing — Determination of the size of industrial radiographic gamma sources
无损检测射线检测工业射线γ源尺寸的测定
2024-06-17
GB/T 39427-2020
无损检测 工业Ir192伽玛射线源尺寸测定方法
Non-destructive testing—Testing method for determining the size of Ir192 industrial radiographic source
2020-11-19
BS EN 1330-3-1997
Non-destructive testing. Terminology-Terms used in industrial radiographic testing
无损检测 术语
1997-09-15
KS B ISO 17636-2
용접부의 비파괴검사 — 방사선투과검사 — 제2부: 디지털 검출기를 사용하는 X선과 감마선 기법
焊缝无损检测射线检测第2部分:带数字探测器的X射线和伽马射线技术
2024-06-14
GB/T 3323.2-2019
焊缝无损检测 射线检测 第2部分:使用数字化探测器的X和伽玛射线技术
Non-destructive testing of welds—Radiographic testing—Part 2:X- and gamma-ray techniques with digital detectors
2019-08-30
ISO 17636-2-2022
Non-destructive testing of welds — Radiographic testing — Part 2: X- and gamma-ray techniques with digital detectors
焊缝无损检测.射线照相检测.第2部分:带数字探测器的X射线和γ射线技术
2022-09-01
JB/T 11608-2013
无损检测仪器 工业用X射线探伤装置
Non-destructive testing instrumrnts. Industrial X-ray apparaius for radiographic testing
2013-12-31
GB/T 16544-2008
无损检测 伽玛射线全景曝光照相检测方法
Non-destructive testing - Practice for gamma-ray radiographic testing by panoramic exposure
2008-07-30
KS B ISO 5580(2021 Confirm)
비파괴 검사-공업용 방사선 투과 사진 관찰기-최소 요건
无损检测工业射线照明灯最低要求
2001-12-01
KS B ISO 5580(2016 Confirm)
비파괴 검사-공업용 방사선 투과 사진 관찰기-최소 요건
无损检测工业射线照明灯最低要求
2001-12-01
KS B ISO 5580
비파괴검사 — 산업용 방사선 투과 사진 관찰기 — 최소 요건
无损检测.工业射线照相照明器.最低要求
2022-08-10
GB/T 19802-2005
无损检测 工业射线照相观片灯 最低要求
Non-destructive testing-Industrial radiographic illuminators-Minimum requirements
2005-06-08
无损检测机翼射线成像检测方法

最后更新时间 2025-09-02