HG/T 4984-2016
焊接用混合气体 二氧化碳-氧/氩
Mixed gas for welding - Carbon dioxide,oxygen in argon
2016-04-05
HG/T 4985-2016
焊接用混合气体 氦/氩
Mixed gas for welding - Helium in argon
2016-04-05
HG/T 3728-2004
焊接用混合气体 氩-二氧化碳
Mixed gas for welding Argon-Carbon dioxide
2004-12-14
NBS TN-1079
Tables of Industrial Gas Container Contents and Density for Oxygen, Argon, Nitrogen, Helium, and Hydrogen
氧、氩、氮、氦和氢的工业气体容器含量和密度表
JB/T 8806-1998
气体保护焊用混合气体配比器技术条件
Mixer for mixed gas intended to be used in gas shielded arc welding. Technical specification
1998-09-30
YB/T 4890-2021
钢铁企业O2-CO2气体混合利用技术规范
Technical specification for oxygen-carbon dioxide gas mixed utilization in iron and steel enterprises
2021-03-05
AWS B2.1-1-233-2006
Standard Welding Procedure Specification (Swps) for Argon Plus 25% Carbon Dioxide Shielded Gas Metal Arc Welding (Short Circuting Transfer Mode) followed by Argon Plus 2% Oxygen Shielded Gas Metal Arc Welding (Spray Transfer Mode) of Carbon Steel (M-1/P-1/S-1) Groups 1 and 2, 1/8 through 1-1/2 inch
碳钢（M-1/P-1/S-1）组1和2、1/8至1-1/2英寸的氩加25%二氧化碳气体保护金属极弧焊（短路过渡模式）和氩加2%氧气保护气体保护金属极弧焊（喷射过渡模式）的标准焊接工艺规范（Swps）
2006-01-01
MIL MIL-C-3495E
CONVERTER, LIQUID TO GAS OXYGEN, ARGON, AND NITROGEN, SKID MOUNTED, 1,200 SCF PER HOUR CAPACITY (NO S/S DOCUMENT) (SUPERSEDING MIL-C-3495D)
液氧、氩气和氮气转换器 撬装 每小时1200 SCF（无S/S文件）（取代MIL-C-3495D）
1978-01-10
DZ/T 0064.74-2021
地下水质分析方法 第74部分:氦气、氢气、氧气、氩气、氮气、甲烷、一氧化碳、二氧化碳和硫化氢的测定 气相色谱法
Methods for analysis of groundwater quality—Part 74：Determination of helium,hydrogen,oxygen,argon,nitrogen,methane,carbon monoxide,carbon dioxide and hydrogen sulfide—Gas chromatography
2021-02-22
BS 6942-2-1989
Design and construction of small kits for oxy-fuel gas welding and allied processes-Specification for kits using refillable gas containers for oxygen and fuel gas
用于氧燃料气体焊接和相关工艺的小型成套设备的设计和建造
1999-11-15
DIN 32508
Micro devices for brazing and welding with own hydrogen and oxygen production - Mechanical and gas engineering requirements, test, marking
自行制氢和制氧的钎焊和焊接用微型装置.机械和气体工程要求、试验和标记
2000-12-01
UNE-EN 874-1996
GAS WELDING EQUIPMENT. OXYGEN/FUEL GAS BLOWPIPES (CUTTING MACHINE TYPE) of cylindrical barrel. Type of construction, general specifications, test methods.
气焊设备 圆柱形筒体的氧气/燃气吹管（切割机类型） 结构类型、一般规范、试验方法
1996-06-19
AWS B2.1-1-235-2006
Standard Welding Procedure Specification (Swps) for Argon Plus 2 Oxygen Shielded Gas Metal Arc Welding of Carbon Steel (M-1/P-1/S-1) Groups 1 and 2, 1/8 through 1-1/2 inch Thick, ER70S-3, Flat Position Only, As Welded or PWHT Condition, Primarily Pipe Applications
碳钢（M-1/P-1/S-1）1组和2组1/8至1-1/2英寸厚ER70S-3 仅平焊位置 焊态或焊后热处理条件 主要用于管道应用的氩加氧保护气体保护金属极电弧焊标准焊接工艺规范（Swps）
2006-01-01
AWS B2.1-1-232-2006
Standard Welding Procedure Specification (Swps) for Argon Plus 25% Carbon Dioxide Shielded Gas Metal Arc Welding (Short Circuting Transfer Mode) followed by Argon Plus 25% Carbon Dioxide Shielded Flux Cored Arc Welding of Carbon Steel (M-1/P-1/S-1, Groups 1 and 2), 1/8 through 1-1/2 inch Thick, ER70
1/8至1-1/2英寸厚ER70碳钢（M-1/P-1/S-1 第1组和第2组）氩加25%二氧化碳保护气体保护金属弧焊（短路过渡模式）和氩加25%二氧化碳保护药芯焊丝电弧焊的标准焊接工艺规范（Swps）
2006-01-01
DIN V 32528
Gas welding equipment - Industrial manual and machine oxygen-fuel gases blowpipes for flame heating and allied processes (CR 13259:1998)
气焊设备.火焰加热和相关工艺用工业手册和机器氧气燃料气体吹管（CR 13259-1998）
1999-02-01