BS EN 12504-3-2005
Testing concrete in structures-Determination of pull-out force
结构中的混凝土测试
2005-03-31
UNE-EN 12504-3-2006
Testing concrete in structures - Part 3: Determination of pull-out force
结构中的混凝土试验.第3部分:拔出力的测定
2006-07-26
BS EN 17490-2021
Determination of screw pull out forces from screw thread channels
螺纹槽中螺钉拔出力的测定
2021-09-09
DIN EN 12504-3
Testing concrete in structures - Part 3: Determination of pull-out force
结构中混凝土的试验.第3部分:拔出力的测定；德文版EN 12504-3:2005
2005-07-01
HG/T 2877-2014
橡塑拖、凉鞋帮带拔出力试验方法
Determination of pull-out force of upper bands from bottom of slippers or sandals
2014-05-12
GB/T 38011-2019
鞋类 整鞋试验方法 帮带拔出力
Footwear—Test methods for whole shoe—Pull-out force of upper bands
2019-08-30
UNE 83609-1994
SHOTCRETE. DETERMINATION OF THE COMPRESSIVE STRENGTH IN SITU. PULL-OUT METHOD.
喷射混凝土 现场测定抗压强度 拔出法
1994-09-07
GOST 2891-1978
Резина для низа обуви. Метод определения сопротивления вырыванию шпильки
橡胶鞋底 确定拔出针脚电阻的方法
GB/T 3513-2018
硫化橡胶 与单根钢丝粘合力的测定 抽出法
Rubber,vulcanized—Determination of adhesion to single wire—Pull out test
2018-09-17
KS M ISO 3501
플라스틱 배관 시스템 — 압력관과 이음관의 기계적 연결부 — 축 방향 정하중 하의 뽑힘 저항 시험방법
塑料管道系统 - 配件和压力管道之间的机械接头 - 恒定纵向力下的抗拉力试验方法
2019-12-31
BS EN ISO 3501-2022
Plastics piping systems. Mechanical joints between fittings and pressure pipes. Test method for resistance to pull-out under constant longitudinal force
塑料管道系统 配件和压力管道之间的机械接头 恒定纵向力下抗拔出的试验方法
2022-02-04
KS M ISO 3501
플라스틱 배관 시스템 — 압력관 및 이음관의 기계적 연결부 — 축 방향 정하중 하의 뽑힘 저항 시험방법
塑料管道系统配件和压力管道之间的机械接头恒定纵向力下抗拔性的试验方法
2023-11-14
GOST R ISO 3501-2020
Трубопроводы из пластмасс. Механические соединения между фитингами и напорными трубами. Метод определения стойкости к выдергиванию под действием постоянного осевого усилия
塑料管道系统 配件和压力管道之间的机械接头 恒定纵向力下抗拔力的试验方法
ISO 3501-2021
Plastics piping systems — Mechanical joints between fittings and pressure pipes — Test method for resistance to pull-out under constant longitudinal force
塑料管道系统.配件和压力管道之间的机械接头.恒定纵向力下抗拔出的试验方法
2021-12-14
UNE-EN 712-1994
THERMOPLASTICS PIPING SYSTEMS. END-LOAD BEARING MECHANICAL JOINTS BETWEEN PRESSURE PIPES AND FITTINGS. TEST METHOD FOR RESISTANCE TO PULL-OUT UNDER CONSTANT LONGITUDINAL FORCE.
热塑性塑料管道系统 压力管道和配件之间的端部承载机械接头 在恒定纵向力下抗拔出的试验方法
1994-12-16
DIN EN 712
Thermoplastics piping systems; end-load bearing mechanical joints between pressure pipes and fittings; test method for resistance to pull-out under constant longitudinal force; German version EN 712:1993
热塑性塑料管道系统；压力管道和配件之间的端部承载机械接头；在恒定纵向力下抗拔出的试验方法；德文版EN 712:1993
1994-03-01
UNE-EN 1741-1999
DETERMINATION OF SHEAR STRENGTH FOR OUT-OF-PLANE FORCES OF JOINTS BETWEEN PREFABRICATED COMPONENTS MADE OF AUTOCLAVED AERATED CONCRETE OR LIGHTWEIGHT AGGREGATE CONCRETE WITH OPEN STRUCTURE.
测定由蒸压加气混凝土或具有开放结构的轻骨料混凝土制成的预制构件之间接缝的平面外力的剪切强度
1999-02-04
BS EN 1741-1998
Determination of shear strength for out-of-plane forces of joints between prefabricated components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure
由蒸压加气混凝土或具有开放结构的轻骨料混凝土制成的预制构件之间接缝平面外力的剪切强度测定
1998-09-15
GOST 12232-1989
Щетки электрических машин. Размеры и методы определения переходного электрического сопротивления между щеткой и токоведущим проводом и определения усилия вырывания токоведущего провода
电机碳刷 碳刷的尺寸和用于确定刷子和分流器之间的电接触电阻的方法以及分流器的断开力
DIN EN 1741
Determination of shear strength for out-of-plane forces of joints between prefabricated components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure; German version EN 1741:1998
测定由蒸压加气混凝土或具有开放结构的轻骨料混凝土制成的预制构件之间接缝的平面外力的剪切强度；德文版EN 1741:1998
1998-06-01