DIN 2281-3
Geometrical product specifications (GPS) - GO workshop screw plug gauges and check plugs for ISO metric screw threads with nominal diameters over 40 mm up to 250 mm, for use in precision engineering
产品几何技术规范（GPS）-“GO”螺纹塞规.第3部分:精密机械用公称直径大于40mm至250mm的ISO公制螺纹的“GO”车间塞规和止回塞规
2001-12-01
DIN 2282-3
Geometrical product specifications (GPS) - GO screw gauging members for workshop plug gauges and check plugs for ISO metric screw threads with nominal diameters over 40 mm up to 250 mm, for use in precision engineering
产品几何技术规范（GPS）-“GO”螺纹量规件.第3部分:精密工程用公称直径超过40mm至250mm的ISO公制螺纹的“GO”车间量规和检查塞规
2001-12-01
EN 3145-2001
Aerospace series - Round bars, hot rolled in steel - Normal tolerances - Diameter 6 mm < D < 250 mm - Dimensions
航空航天系列 - 圆钢 热轧钢 - 正常公差 - 直径6 mm
2001-12-12
GOST 14826-1969
Калибры-пробки гладкие односторонние листовые диаметром свыше 50 до 250 мм. Конструкция и размеры
直径超过50至250 mm的平板单端塞规 设计和尺寸
GB/T 38205.3-2019
液压传动 16MPa系列单杆缸的安装尺寸 第3部分：缸径250mm～500mm紧凑型系列
Hydraulic fluid power—Mounting dimensions for single rod cylinders，16MPa series—Part 3:Compact series with bores from 250mm to 500mm
2019-10-18
DIN 2284-3
Geometrical product specifications (GPS) - NOT GO screw gauging members for workshop plug gauges and check plugs for ISO metric screw threads with nominal diameters over 40 mm up to 250 mm in precision engineering
产品几何技术规范（GPS）-“不合格”螺纹量规件-第3部分:精密机械用公称直径超过40mm至250mm的ISO公制螺纹的“不合格”车间量规和检查塞规
2001-12-01
DIN 2283-3
Geometrical product specifications (GPS) - NOT GO workshop screw plug gauges and check plug for ISO metric screw threads with nominal diameters over 40 mm up to 250 mm, for use in precision engineering
产品几何技术规范（GPS）-“不合格”螺纹塞规.第3部分:精密机械用公称直径大于40mm至250mm的ISO公制螺纹的“不合格”车间塞规和止回塞规
2001-12-01
GOST 17128-1971
Опоки литейные сварные из литых стальных элементов прямоугольные размерами в свету: длиной от 400 до 500 мм, шириной от 300 до 500 мм, высотой от 100 до 250 мм. Конструкция и размеры
具有内部尺寸的铸钢元件的矩形焊接成型箱:长度为400至500mm 宽度为300至500mm 高度为100至250mm 施工和尺寸
ISO 6020-3-2015
Hydraulic fluid power — Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series — Part 3: Compact series with bores from 250 mm to 500 mm
液压传动.16MPa（160bar）系列单杆液压缸的安装尺寸.第3部分:孔为250mm至500mm的紧凑型系列
2015-08-20
DIN EN 3146
Aerospace series - Round bars, hot rolled, in steel, close tolerances, diameter 6 mmD250 mm - Dimensions; German and English version EN 3146:2001
航空航天系列.直径6mm的精密公差热轧圆钢.脱脂250 mm.尺寸；德语和英语版本EN 3146:2001
2003-06-01
BS 96/716610 DC
Aerospace series. Heat resisting alloy NI-PH1301 (NiCr19Co18Mo4Ti3A13) as wrought forging stock a or D < 250 mm (prEN 4375)
航空航天系列 锻造坯料a或D<250mm的耐高温合金NI-PH1301（NiCr19Co18Mo4Ti3A13）（prEN 4375）
1996-12-12
DIN EN 3671
Aerospace series - Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb) - Non heat treated - Forging stock - a or D 250 mm; German and English version EN 3671:2007
航空航天系列.耐高温合金NI-PH3601（NiCr22Mo9Nb）.非热处理.锻造坯料.a或D度250mm；德语和英语版本EN 3671:2007
2007-07-01