现行 JB/T 8249.2-2016
照相机通用要求 第2部分:三脚架连接螺纹 照相机通用要求 第2部分:三脚架连接螺纹 Camera general requirements-Part 2:Tripod connections
发布日期:2016-10-22
实施日期:2017-04-01
分类信息
研制信息

归口单位: 全国照相机械标准化技术委员会

起草单位: 杭州照相机械研究所、 国家照相机质量监督检验中心

起草人: 任森、 沈荣根、 王均

标准简介

本部分规定了照相机三脚架连接螺纹的技术要求。本部分适用于照相机以及其他照相器材

相似标准/计划/法规
KS C IEC 60352-2(2018 Confirm)
무 납땜 접속 - 제2부 : 무 납땜 압착 접속 - 일반 요구사항, 시험방법 및 활용지침
无焊连接第2部分:压接连接一般要求、试验方法和实用指南
2008-11-28
KS C IEC 60352-2(2023 Confirm)
무 납땜 접속 - 제2부 : 무 납땜 압착 접속 - 일반 요구사항, 시험방법 및 활용지침
无焊连接第2部分:压接连接一般要求、试验方法和实用指南
2008-11-28
GB/T 18290.2-2015
无焊连接 第2部分:压接连接 一般要求、试验方法和使用导则
Solderless connections— Part 2:Crimped connections—General requirements,test methods and practical guidance
2015-12-31
IEC 60352-2-2024
Solderless connections - Part 2: Crimped connections - General requirements, test methods and practical guidance
无焊连接 第2部分:压接连接 一般要求、试验方法和实用指南
2024-10-30
UNE-EN 60352-2-1998
SOLDERLESS CONNECTIONS. PART 2: SOLDERLESS CRIMPED CONNECTIONS. GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE.
无焊连接 第2部分:无焊压接连接 一般要求、试验方法和实用指南
1998-01-30
UNE-EN 60352-2/A1-1998
SOLDERLESS CONNECTIONS. PART 2: SOLDERLESS CRIMPED CONNECTIONS. GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE.
无焊连接 第2部分:无焊压接连接 一般要求、试验方法和实用指南
1998-01-30
IEC SRD 62913-2-3-2019
Generic smart grid requirements - Part 2-3: Resources connected to the grid domains
通用智能电网要求.第2-3部分:连接到电网域的资源
2019-05-17
IEC/IEEE 80005-1-2019/Amd 2-2023
Utility connections in port — Part 1: High voltage shore connection (HVSC) systems — General requirements — Amendment 2
港口公用设施连接第1部分:高压岸上连接(HVSC)系统一般要求修改2
2023-09-06
IEC/IEEE 80005-1-2019/AMD2-2023
Amendment 2 - Utility connections in port - Part 1: High voltage shore connection (HVSC) systems - General requirements
修改件2.港口公用设施连接.第1部分:高压岸上连接(HVSC)系统.一般要求
2023-08-31
SAE J2223/2_201102
Connections for On-Board Road Vehicle Electrical Wiring Harnesses - Part 2: Tests and General Performance Requirements
车载电气线路连接 - 第2部分:测试和一般性能要求
2011-02-18
ISO 19072-2-2019
Road vehicles — Connection interface for pyrotechnic devices, two-way and three-way connections — Part 2: Test methods and general performance requirements
道路车辆 - 烟火设备的连接接口 双向和三向连接 - 第2部分:测试方法和一般性能要求
2019-12-11
DIN EN 50549-2
Requirements for generating plants to be connected in parallel with distribution networks - Part 2: Connection to a MV distribution network - Generating plants up to and including Type B; German version EN 50549-2:2019 + AC:2019
与配电网并联的发电厂的要求.第2部分:中压配电网的连接.B型及以下的发电厂;德文版EN 50549-2:2019+AC:2019
2020-10-01
KS R ISO 8092-2(2019 Confirm)
도로 차량 — 온보드 전기 와이어링 하니스용 접속 장치 — 제2부: 정의, 시험방법 및 일반 성능 요구 사항
道路车辆 - 车载电气线束的连接 - 第2部分:定义 测试方法和一般性能要求
2014-10-24
KS R ISO 8092-2
도로 차량 — 온보드 전기 와이어링 하니스용 접속 장치 — 제2부: 정의, 시험방법 및 일반 성능 요구 사항
道路车辆车载电气线束的连接第2部分:定义、试验方法和一般性能要求
2024-12-27
ISO 8092-2-2023
Road vehicles — Connections for on-board electrical wiring harnesses — Part 2: Terminology, test methods and general performance requirements
道路车辆车载电气线束的连接第2部分:术语、试验方法和一般性能要求
2023-09-04
UNE-EN ISO 8092-2-2007
Road vehicles - Connections for on-board electrical wiring harnesses - Part 2: Definitions, test methods and general performance requirements (ISO 8092-2:2005)
道路车辆.车载电气线束的连接.第2部分:定义 试验方法和一般性能要求(ISO 8092-2-2005)
2007-02-28
UNE 133001-2-1995
ATTACHMENTS TO PUBLIC SWITCHED TELEPHONE NETWORK (PSTN). GENERAL TECHNICAL REQUIREMENTS FOR EQUIPMENT CONNECTED TO AN ANALOGUE SUBSCRIBER INTERFACE IN THE PSTN. PART 2: ATTACHEMENT REQUIREMENTS TO THE SPANISH PSTN.
公共交换电话网(PSTN)的附件 PSTN中连接到模拟用户接口的设备的一般技术要求 第2部分:西班牙PSTN的附件要求
1995-10-16
UNE 133001-2/1M-1998
ATTACHMENTS TO PUBLIC SWITCHED TELEPHONE NETWORK (PSTN). GENERAL TECHNICAL REQUIREMENTS FOR EQUIPMENT CONNECTED TO AND ANALOGUE SUBSCRIBER INTERFACE IN THE PSTN. PART 2: ATTACHMENT REQUIREMENTS TO THE SPANISH PSTN.
公共交换电话网(PSTN)的附件 PSTN中连接设备和模拟用户接口的一般技术要求 第2部分:西班牙PSTN的连接要求
1998-04-17
SAE J2244/2_200712
Connections for Fluid Power and General Use--Ports and Stud Ends with ISO 261 Threads and O-Ring Sealing Part 2: Heavy-Duty (S Series) Stud Ends--Dimensions, Design, Test Methods, and Requirements
流体动力和通用连接件ISO 261螺纹和O形密封圈的端口和螺柱端第2部分:重型(S系列)螺柱端尺寸、设计、试验方法和要求
2007-12-21
DIN EN 60999-1
Connecting devices - Electrical copper conductors; Safety requirements for screw-type and screwless-type clamping units - Part 1:General requirements and particular requirements for clamping units for conductors 0.2 mm<(hoch)2> up to 35 mm<(hoch)2> (included) (IEC 60999-1:1999, modified); German version EN 60999-1:2000
连接装置——电铜导体;螺钉式和无螺钉式夹紧装置的安全要求.第1部分:0.2mm(hoch)2>至35mm(hoch)2>导线夹紧装置的一般要求和特殊要求(包括)(IEC 60999-1:1999 修改);德国版
2000-12-01
脚架螺纹照相机连接

最后更新时间 2025-09-02