JB/T 4120-2017
大型锻造合金钢支承辊 技术条件
Heavy forged alloy steel backup rolls-Technical specification
2017-01-09
JB/T 3733-2017
大型锻造合金钢热轧工作辊 技术条件
Heavy forged alloy steel hot rolling work rolls - Technical specification
2017-01-09
JB/T 13378-2018
大型锻造合金钢铝轧机工作辊 技术条件
Heavy alloy steel work roll forgings for aluminum rolling mill-Technicalspecification
2018-02-09
NAS 1050 Rev.3
Grab Hook, Forged Alloy Steel, Direct Eye (for Ground Support Equipment)
抓钩 锻造合金钢 直眼（用于地面支撑设备）
2011-12-22
SAE AMS2370M
Quality Assurance Sampling and Testing, Carbon and Low-Alloy Steel Wrought Products and Forging Stock
碳素和低合金钢锻造产品和锻造品质量保证采样和测试
2023-01-25
SAE AMS2259G
Chemical Check Analysis Limits, Wrought Low-Alloy and Carbon Steels
化学检查分析限制了锻造低合金钢和碳钢
2023-01-17
ASTM A707/A707M-19
Standard Specification for Forged Carbon and Alloy Steel Flanges for Low-Temperature Service
用于低温服务的锻造碳和合金钢法兰的标准规范
2019-11-01
SAE AMS2376E
Qualification, Approval, and Control of Premium-Quality Forgings Alloy Steels and Heat-Treatable Corrosion and Heat Resistant Steels and Alloys
优质锻造合金钢和热处理耐腐蚀和耐热钢和合金的资质认证和控制
2017-08-14
ASTM A522/A522M-22
Standard Specification for Forged or Rolled 8 and 9% Nickel Alloy Steel Flanges, Fittings, Valves, and Parts for Low-Temperature Service
低温设备用锻造或轧制8%和9%镍合金钢法兰、配件、阀门和零件
2022-09-01
T/CNS 51.3-2021
核电厂用合金钢构筑成形工艺技术要求 第3部分：锻造加热
2021-07-26
ASTM A369/A369M-24
Standard Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service
高温设备用碳素钢和铁素体合金钢锻造和钻孔管的标准规范
2024-03-01
ASTM A983/A983M-06(2021)
Standard Specification for Continuous Grain Flow Forged Carbon and Alloy Steel Crankshafts for Medium Speed Diesel Engines
用于中速柴油发动机的连续颗粒流动锻造碳和合金钢曲轴的标准规范
2021-03-01
T/SSEA 0230-2022
绿色设计产品评价技术规范 双辊铸轧碳素钢及低合金钢热轧薄钢带
2022-11-01
NB/T 20006.16-2021
压水堆核电厂用合金钢 第16部分：核岛设备支承构件用锰-镍-钼钢厚钢板
2021-01-07
NB/T 20008.1-2012
压水堆核电厂用其他材料 第1部分：反应堆冷却剂系统支承件用合金钢锻件
Other material for pressurized water reactor nuclear power plant-Part 1:Alloy steel forgings for use in reactor coolant system supports
2012-01-06
ASTM A958/A958M-24
Standard Specification for Steel Castings, Carbon and Alloy, with Tensile Requirements, Chemical Requirements Similar to Standard Wrought Grades
具有拉伸要求和类似于标准锻造等级的化学要求的碳素钢和合金钢铸件的标准规范
2024-03-01
SAE AMS6302L
Low-Alloy Steel, Heat-Resistant, Bars, Forgings, Mechanical Tubing and Forging Stock, 0.65Si - 1.25Cr - 0.50Mo - 0.25V (0.28 - 0.33C)
耐热低合金钢、棒材、锻件、机械卡套管和锻造坯料0.65Si-1.25Cr-0.55Mo-0.25V（0.28-0.33C）
2023-03-20
NB/T 20005.11-2012
压水堆核电厂用碳钢和低合金钢 第11部分：S1、S2级支承件用无缝钢管
Carbon steel and low alloy steel for pressurized water reactor nuclear power plants-Part 11:Seamless pipes for class S1 and S2 supports
2012-01-06
NB/T 20005.8-2012
压水堆核电厂用碳钢和低合金钢 第8部分：S1、S2级支承件用钢板、型钢和钢棒
Carbon steel and low alloy steel for PWR nuclear power plant-Part 8:Steel plates,beams and bars for class S1 and S2 supports
2012-01-06
MIL MIL-DTL-22052E
VALVE, STOP AND STOP CHECK, GLOBE, ANGLE, AND Y PATTERN, CAST OR FORGED CARBON OR ALLOY STEEL, OUTSIDE SCREW AND YOKE (SIZES 2-1/2 INCHES AND LARGER)
阀门、止回阀和止回阀、截止阀、角阀和Y型阀、铸造或锻造碳钢或合金钢、外螺纹和阀轭（尺寸2-1/2英寸及以上）
2018-07-18