现行 SY/T 7079-2016
补偿中子刻度器校准方法 补偿中子刻度器校准方法 The calibration method of neutron calibrator
发布日期:2016-01-07
实施日期:2016-06-01
分类信息
研制信息

归口单位: 石油工业标准化技术委员会石油专用计量器具校准规范直属工作组

起草单位: 中国石油天然气集团公司石油测井仪器计量站

起草人: 邱益香、 王剑琴、 臧德福、 王江波、 任晓荣、 刘青、 李来俊

标准简介

本标准规定了石油测井领域的补偿中子刻度器校准的技术要求、校准设备、校准条件、校准方法和复校时间间隔。本标准适用于新投产、使用中和修理后的补偿中子刻度器的校准

相似标准/计划/法规
SY/T 6720-2008
自然伽马能谱测井刻度器校准方法
The calibration method of spectralog calibrator
2008-06-16
GOST 8.521-1984
Государственная система обеспечения единства измерений. Установки поверочные нейтронного излучения. Методика поверки
确保测量一致性的状态系统 用于校准中子辐射的集合 验证方法
SY/T 7077-2016
自然伽马刻度器校准方法
The calibration method of Gamma-ray calibrator
2016-01-07
SY/T 6704-2019
井斜仪校准装置校准方法
Calibration method of inclinometer calibration facility
2019-11-04
SY/T 6759-2009
示功仪校准装置校准方法
Calibration method of the calibration device for indicator
2009-12-01
BS ISO 16063-44-2018
Methods for the calibration of vibration and shock transducers-Calibration of field vibration calibrators
振动和冲击传感器的校准方法
2018-11-05
SY/T 7081-2016
检波器测试仪检定装置校准方法
Calibrating method for calibration devicc of gcophone tester
2016-01-07
KS A ISO 8529-3(2017 Confirm)
기준 중성자 방사선 - 공간 및 개인 선량계 교정과 중성자 에너지 및 입사각 변화에 따른 선량계의 반응특성 결정법
参考中子辐射-面积剂量计和个人剂量计的校准及其作为中子能量和入射角函数的响应的测定
2002-10-12
KS A ISO 8529-3(2022 Confirm)
기준 중성자 방사선 - 공간 및 개인 선량계 교정과 중성자 에너지 및 입사각 변화에 따른 선량계의 반응특성 결정법
参考中子辐射-面积和个人剂量计的校准及其作为中子能量和入射角函数的响应测定
2002-10-12
BS ISO 16063-45-2017
Methods for the calibration of vibration and shock transducers-In-situ calibration of transducers with built in calibration coil
振动和冲击传感器的校准方法
2017-07-10
ISO 16063-44-2018
Methods for the calibration of vibration and shock transducers — Part 44: Calibration of field vibration calibrators
振动和冲击传感器校准方法 - 第44部分:校准场振动校准器
2018-11-02
BS ISO 16063-41-2011
Methods for the calibration of vibration and shock transducers-Calibration of laser vibrometers
振动和冲击传感器的校准方法
2011-09-30
BS ISO 16063-16-2014
Methods for the calibration of vibration and shock transducers-Calibration by Earth’s gravitation
振动和冲击传感器的校准方法 利用地球引力进行校准
2015-09-30
BS ISO 16063-17-2016
Methods for the calibration of vibration and shock transducers-Primary calibration by centrifuge
振动和冲击传感器的校准方法
2016-06-30
GB/T 37776-2019
动态力传感器校准方法 冲击力法校准
Methods for the calibration of dynamic force transducers—Calibration by shock force
2019-08-30
SL/T 127-2017
容量筒校验方法
Calibration method for container
2017-03-08
SL 144.5-2008
离心机校验方法
Calibration method of centrifuge
2008-06-17
SY/T 6740-2008
井径仪校准方法
The calibration method of caliper
2008-06-16
ISO 16063-45-2017
Methods for the calibration of vibration and shock transducers — Part 45: In-situ calibration of transducers with built in calibration coil
振动和冲击传感器校准方法 - 第45部分:内置校准线圈的换能器的原位校准
2017-05-17
BS ISO 16063-12-2002
Methods for the calibration of vibration and shock transducers-Primary vibration calibration by the reciprocity method
振动和冲击传感器的校准方法
2002-07-29
中子校准刻度补偿方法

最后更新时间 2025-09-02