SY/T 6453-2000
水泥桨高温高压失水测定仪
High temperature and high pressure fluid loss cell
2000-03-10
MIL MIL-G-81827A Notice 2-Validation 2
GREASE, AIRCRAFT, HIGH LOAD CAPACITY, WIDE TEMPERATURE RANGE
润滑脂 飞机 高负载能力 宽温度范围
2019-07-05
SAE AMSG81827A
Grease, Aircraft, High Load Capacity, Wide Temperature Range
油脂 飞机 高负载能力 宽温度范围
2012-02-03
ASTM C16-03(2025)
Standard Test Method for Load Testing Refractory Shapes at High Temperatures
高温下耐火材料形状负荷试验的标准试验方法
2025-04-01
GOST R 57711-2017
Композиты керамические. Определение характеристик усталости при нагружении с постоянной амплитудой при повышенной температуре
陶瓷复合材料 高温恒幅疲劳载荷特性的测定
GB/T 42910-2023
无机胶粘剂高温压缩剪切强度试验方法
Test methods for shear strength by compression loading at high temperature of inorganic adhesives
2023-08-06
QPL QPL-81827-12
GREASE, AIRCRAFT, HIGH LOAD CAPACITY, WIDE TEMPERATURE RANGE (SUPERSEDING QPL-81827-11)
飞机润滑脂 高负载能力 宽温度范围（取代QPL-81827-11）
2005-02-28
MIL MIL-G-81827A
GREASE, AIRCRAFT, HIGH LOAD CAPACITY, WIDE TEMPERATURE RANGE (SUPERSEDING MIL-G-81827)
飞机润滑脂 高负载能力 宽温度范围（取代MIL-G-81827）
1983-01-24
GB/T 1634.3-2004
塑料 负荷变形温度的测定 第3部分:高强度热固性层压材料
Plastics--Determination of temperature of deflection under load--Part 3:High-strength thermosetting laminates
2004-03-15
BS EN ISO 75-3-2004
Plastics. Determination of temperature of deflection under load-High-strength thermosetting laminates and long-fibre-reinforced plastics
塑料 荷载下挠度温度的测定 高强度热固性层压板和长纤维增强塑料
2004-05-28
ISO 4680-2022
Corrosion of metals and alloys — Uniaxial constant-load test method for evaluating susceptibility of metals and alloys to stress corrosion cracking in high-purity water at high temperatures
金属和合金的腐蚀.评估高温下金属和合金在高纯度水中应力腐蚀开裂敏感性的单轴恒定载荷试验方法
2022-12-19
JIS K 7191-3-2007
Plastics -- Determination of temperature of deflection under load -- Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics
塑料载荷下挠曲温度的测定第3部分:高强度热固性层压板和长纤维增强塑料
2007-01-01
KS M ISO 75-3(2018 Confirm)
플라스틱 — 하중 변형 온도의 측정–제3부: 고강도 열경화성 수지 적층판 및 장섬유강화 플라스틱
塑料.负载下挠曲温度的测定.第3部分:高强度热固性层压板和长纤维增强塑料
2013-12-31
KS M ISO 75-3(2023 Confirm)
플라스틱 — 하중 변형 온도의 측정–제3부: 고강도 열경화성 수지 적층판 및 장섬유강화 플라스틱
塑料负载下挠曲温度的测定第3部分:高强度热固性层压板和长纤维增强塑料
2013-12-31
ISO 75-3-2025
Plastics — Determination of temperature of deflection under load — Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics
塑料载荷下挠曲温度的测定第3部分:高强度热固性层压板和长纤维增强塑料
2025-07-25
BS ISO 21819-1-2018
Fine ceramics (advanced ceramics, advanced technical ceramics). Characteristic of piezoelectric properties under high-load conditions-Resonant-antiresonant method under high-temperature conditions
精细陶瓷（高级陶瓷、高级工业陶瓷） 高负载条件下的压电特性
2018-08-13
ISO 21819-1-2018
Fine ceramics (advanced ceramics, advanced technical ceramics) — Characteristic of piezoelectric properties under high-load conditions — Part 1: Resonant-antiresonant method under high-temperature conditions
精细陶瓷（先进陶瓷 先进技术陶瓷） - 高负荷条件下压电性能的特点 - 第1部分:高温条件下的共振反共振法
2018-08-09
BS EN 1894-2005
Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature under inert atmosphere. Determination of shear strength by compression loading of notched specimens
高级技术陶瓷 陶瓷复合材料在惰性气氛下的高温力学性能 用缺口试样的压缩载荷测定剪切强度
2005-05-06
DIN EN 1894
Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of shear strength by compression loading of notched specimens
高级工业陶瓷.惰性气氛下高温下陶瓷复合材料的机械性能.通过缺口试样的压缩载荷测定剪切强度；德文版EN 1894:2005
2005-07-01
QPL QPL-8802-23
SEALING COMPOUND, TEMPERATURE-RESISTANT, INTEGRAL FUEL TANKS AND FUEL CELL CAVITIES, HIGH-ADHESION (SUPERSEDING QPL-8802-22) (S/S BY SAE-AMS-S-8802)
密封化合物 耐高温 整体式燃油箱和燃料电池腔 高附着力（取代QPL-8802-22）（由SAE-AMS-S-8802提供）
1993-10-07