JJF 1628-2017
塑料管材耐压试验机校准规范
Calibration Specification for Testing Machines of Resistance to Internal Pressure of Plastics Pipe
2017-09-26
ASTM D1599-18(2024)
Standard Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings
塑料管、管材和配件耐短时液压的标准试验方法
2024-09-01
GB/T 13465.6-2009
不透性石墨管水压爆破试验方法
Test method for hydraulic pressure bursting of impermeable graphite pipe
2009-04-29
GOST 34648-2020
Трубы и детали трубопроводов из реактопластов, армированных волокном. Методы определения сопротивления труб и фитингов кратковременному воздействию внутреннего гидравлического давления
纤维增强热固性塑料管及其零件 塑料管和管件耐短时内水压的测定
JJF(石化)048-2021
橡胶或塑料软管及软管组合件用无曲挠脉冲试验机校准规范
Calibration Specification for Rubber or Plastics Hoses and Hose Assemblies—Hydraulic-Pressure Impulse Testing Machine Without Flexing
2021-12-02
GB/T 15560-1995
流体输送用塑料管材液压瞬时爆破和耐压试验方法
Standard test method for short-time hydraulic failure and resistance to constant internal pressure of the plastics pipes for the transport of fluids
1995-05-02
GB/T 5351-2005
纤维增强热固性塑料管短时水压 失效压力试验方法
Fiber-reinforced thermosetting plastic composites pipe-Determination of short-time hydraulic failure pressure
2005-05-18
DIN 53769-6
Testing of glass fibre reinforced plastics pipes; Testing of pipes and fittings under pulsating internal pressure
玻璃纤维增强塑料管的试验；脉动内压下管道和管件的试验
1989-04-01
BS EN ISO 3458-2015
Plastics piping systems. Mechanical joints between fittings and pressure pipes. Test method for leaktightness under internal pressure
塑料管道系统 配件和压力管道之间的机械接头 内压下密封性的试验方法
2015-04-30
KS M ISO 3459
플라스틱 배관 시스템 — 압력용 관과 이음관 사이의 기계적 연결부 — 진공에서의 기밀성 시험방법
塑料管道系统.配件和压力管道之间的机械接头.负压下密封性的试验方法
2024-12-09
ISO 3458-2015
Plastics piping systems — Mechanical joints between fittings and pressure pipes — Test method for leaktightness under internal pressure
塑料管道系统 - 配件和压力管之间的机械接头 - 内部压力下的泄漏测试方法
2015-03-26
ISO 3459-2022
Plastic piping systems — Mechanical joints between fittings and pressure pipes — Test method for leaktightness under negative pressure
塑料管道系统.配件和压力管道之间的机械接头.负压下密封性的试验方法
2022-03-29
UNE-EN 1638-1997
PLASTICS PIPING SYSTEMS. GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) PIPES. TEST METHOD FOR THE EFFECTS OF CYCLIC INTERNAL PRESSURE.
塑料管道系统 玻璃纤维增强热固性塑料（GRP）管 循环内压影响的试验方法
1997-11-11
BS EN 1638-1997
Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Test method for the effects of cyclic internal pressure
塑料管道系统 玻璃纤维增强热固性塑料（GRP）管 循环内压影响的试验方法
1997-12-15
UNE-EN 1053-1996
PLASTICS PIPING SYSTEMS. THERMOPLASTICS PIPING SYSTEMS FOR NON-PRESSURe applications. Test method for watertightness.
塑料管道系统 非压力应用的热塑性塑料管道系统 水密性试验方法
1996-05-17
BS 5173-102.4-1990
Methods of test for rubber and plastics hoses and hose assemblies. Hydraulic pressure tests-Determination of volumetric expansion of hydraulic hoses
橡胶和塑料软管及软管组件的试验方法 液压测试 液压软管体积膨胀的测定
1990-11-30
KS M ISO 3458
플라스틱 배관 시스템 — 압력관과 이음관의 기계적 연결부 — 내압하에서 수밀성 시험
塑料管道系统配件和压力管道之间的机械接头内压密封性试验方法
2019-12-31
KS M ISO 3458(2024 Confirm)
플라스틱 배관 시스템 — 압력관과 이음관의 기계적 연결부 — 내압하에서 수밀성 시험
塑料管道系统配件和压力管道之间的机械接头内压密封性试验方法
2019-12-31
DIN 53769-2
Testing of glass fibre reinforced plastics pipes; long-term hydrostatic pressure test
玻璃纤维增强塑料管的试验；长期静水压试验
1986-12-01
ASTM D2143-21
Standard Test Method for Cyclic Pressure Strength of Reinforced, Thermosetting Plastic Pipe
加强型热固性塑料管的循环压力强度的标准试验方法
2021-04-01