现行 JB/T 7948.7-2017
焊剂化学分析方法 第7部分:氧化钠、氧化钾含量测定 焊剂化学分析方法 第7部分:氧化钠、氧化钾含量测定 Methods for chemical analysis of welding fluxes-Part 7:Determination of sodium oxide and potassium oxide content
发布日期:2017-11-07
实施日期:2018-04-01
分类信息
研制信息

归口单位: 全国焊接标准化技术委员会

起草单位: 机械科学研究院哈尔滨焊接研究所、 昆山京群焊材科技有限公司、 洛阳牡丹焊材集团有限公司、 四川大西洋焊接材料股份有限公司、 天津大桥焊材集团有限公司

起草人: 韩蕾、 孙晓红、 童天旺、 闫西锋、 毛兴贵、 崔伟、 杨晶秋、 王琪昭、 张风勇

标准简介

本部分规定了焊剂中氧化钠、氧化钾含量测定的原理、试剂、仪器、试样、分析步骤、分析结果的计算、允许差等内容。本部分适用于焊剂中质量分数为0.20%~3.00%氧化钠、氧化钾含量的测定

相似标准/计划/法规
JB/T 7948.6-2017
焊剂化学分析方法 第6部分:磷含量测定
Methods for chemical analysis of welding fluxes-Part 6:Determination of phosphorus content
2017-11-07
JB/T 7948.2-2017
焊剂化学分析方法 第2部分:氧化锰含量测定
Methods for chemical analysis of welding fluxes-Part 2:Determination of manganese oxide content
2017-11-07
JB/T 7948.5-2017
焊剂化学分析方法 第5部分:氟化钙含量测定
Methods for chemical analysis of welding fluxes-Part 5:Determination of calcium fluoride content
2017-11-07
JB/T 7948.4-2017
焊剂化学分析方法 第4部分:氧化铁含量测定
Methods for chemical analysis of welding fluxes-Part 4:Determination of iron oxide content
2017-11-07
JB/T 7948.3-2017
焊剂化学分析方法 第3部分:氧化铝含量测定
Methods for chemical analysis of welding fluxes-Part 3:Determination of aluminium oxide content
2017-11-07
JB/T 7948.1-2017
焊剂化学分析方法 第1部分:二氧化硅含量测定
Methods for chemical analysis of welding fluxes-Part 1:Determination of silicon dioxide content
2017-11-07
JB/T 7948.9-2017
焊剂化学分析方法 第9部分:氧化钙、氧化镁含量测定
Methods for chemical analysis of welding fluxes-Part 9:Determination of calcium oxide and magnesium oxide content
2017-11-07
JIS G 1311-7-2012
Method for chemical analysis of ferromanganese -- Part 7: Determination of nitrogen content
锰铁化学分析方法第7部分:氮含量的测定
2012-01-01
GB/T 7739.7-2022
金精矿化学分析方法 第7部分:铁量的测定
Methods for chemical analysis of gold concentrates—Part 7: Determination of iron content
2022-12-30
GB/T 20899.7-2022
金矿石化学分析方法 第7部分:铁量的测定
Methods for chemical analysis of gold ores—Part 7: Determination of iron content
2022-12-30
JIS G 1322-7-2010
Methods for chemical analysis of metallic silicon -- Part 7: Methods for determination of calcium content
金属硅化学分析方法第7部分:钙含量的测定方法
2010-01-01
KS D 1755-7
금속 규소 분석 방법 — 제7부: 칼슘 정량 방법
金属硅化学分析方法第7部分:钙含量的测定方法
2024-11-08
HB/Z 5218.3-2004
铝合金化学分析方法 第3部分:邻菲啰啉光度法测定铁含量
Methods for chemical analysis of aluminium alloys -- Part 3: Determination of iron content by o-phenanthroline spectrophotometric method
2004-02-16
GB/T 23278.7-2009
锡酸钠化学分析方法 第7部分:碱不溶物的测定 重量法
Methods for chemical analysis of sodium stannate - Part 7: Determination of alkali insoluble matter - Gravimetric analysis
2009-01-05
YS/T 535.7-2009
氟化钠化学分析方法 第7部分:酸度的测定 中和法
Chemical analysis methods of sodium fluoride—Part 7:Determination of acidity—Neutral titration method
2009-12-04
GB/T 14506.7-2010
硅酸盐岩石化学分析方法 第7部分:氧化镁量测定
Methods for chemical analysis of silicate rocks--Part 7:Determination of magnesium oxide content
2010-11-10
GB/T 4103.7-2012
铅及铅合金化学分析方法 第7部分:硒量的测定
Methods for chemical analysis of lead and lead alloys - Part 7: Determination of selenium content
2012-12-31
GB/T 5121.7-2008
铜及铜合金化学分析方法 第7部分:砷含量的测定
Methods for chemical analysis of copper and copper alloys - Part 7:Determination of arsenic content
2008-06-17
GB/T 13748.7-2013
镁及镁合金化学分析方法 第7部分:锆含量的测定
Chemical analysis methods of magnesium and magnesium alloys - Part 7:Determination of zirconium content
2013-09-06
GB/T 20975.7-2020
铝及铝合金化学分析方法 第7部分:锰含量的测定
Methods for chemical analysis of aluminium and aluminium alloys—Part 7:Determination of manganese content
2020-06-02
化学分析氧化焊剂测定含量

最后更新时间 2025-09-02