NAS 418
Tube - Low Pressure Fluid Connection
管-低压流体连接
1953-09-30
BS 6362-1990
Specification for stainless steel tubes suitable for screwing in accordance with BS 21 'Pipe threads for tubes and fittings where pressure-tight joints are made on the threads'
符合BS 21“螺纹上有压力密封接头的管道和配件的管螺纹”的不锈钢管规范
1990-06-29
GOST 23691-1979
Соединения труб с трубными решетками и коллекторами теплообменных аппаратов. Запрессовка труб с применением источников импульсного давления. Общие положения
管与管板和热交换器收集器的接头 通过脉冲压力源压缩管 一般
MIL MS27404D
ADAPTER, STRAIGHT, REUSABLE, TUBE TO HOSE, LOW PRESSURE
直接头 可重复使用 管对软管 低压
2020-06-15
GB/T 3087-2022
低中压锅炉用无缝钢管
Seamless steel tubes and pipes for low and medium pressure boiler
2022-04-15
DIN 2442
Steel Tubes of Specified Quality Suitable for Screwing; Nominal Pressure 1 to 100
适用于螺纹连接的规定质量的钢管；标称压力1至100
1963-08-01
CID A-A-51654B
TUBE, TRACHEOSTOMY, DISPOSABLE (LOW PRESSURE CUFF, SHILEY) (SUPERSEDING A-A-51654A)
一次性气管造口管（低压袖带 SHILEY）（替代A-A-51654A）
1992-01-24
ADS AGS838
Assembly of Mark1 Low Pressure Unions for 5/16" DIA. Tubing
为直径为5/16“的管道组装Mark1低压接头
2000-05-01
MIL MS52104D Notice 2-Validation 2
Hose Assembly, Rubber: Fuel and Oil, Low Pressure, Flared Tube
软管组件 橡胶:燃油和机油 低压 扩口管
2018-07-02
MIL MS52104E
HOSE ASSEMBLY, RUBBER: FUEL AND OIL, LOW PRESSURE, FLARED TUBE
橡胶软管组件:燃油和机油低压扩口管
2019-04-02
DIN 8063-3
Pipe joints assemblies and fittings for unplasticized polyvinyl chloride (PVC U) pressure pipes- Part 3: Dimensions of screwed pipe joint assemblies
压力管道用未增塑聚氯乙烯（PVC U）管接头和部件.第3部分:活接头；尺寸
2002-06-01
MIL MS27404 Notice 1-Validation
ADAPTER, STRAIGHT, REUSABLE, TUBE TO HOSE, LOW PRESSURE (S/S BY MS27404A)
可重复使用的直管式低压软管接头（MS27404A提供的S/S）
1988-06-03
MIL MS28884E Notice 1-Inactivation
VALVE, FUEL CHECK, LOW PRESSURE, FLARED TUBE CONNECTION, TYPE A (SUPERSEDING MS28884D)
A型低压扩口管连接燃油止回阀（取代MS28884D）
1998-10-15
ADS AS6709
Typical Assemblies of Alumm Alloy Low Pressure Union for 3/8" DIA. Tubing
直径为3/8“的管道用铝合金低压接头的典型组件
1973-11-01
JB/T 10637-2016
农林拖拉机和机具 高温低压输油胶管
Agriculture and forest tractor and machinery-Rubberized oil tube of hi-temperature and low pressure
2016-04-05
UNE-EN 15908-2011
Anaesthetic and respiratory equipment - Non-interchangeable screw-threaded (NIST) low-pressure connectors for medical gases
麻醉和呼吸设备.医用气体用非可互换螺纹（NIST）低压连接器
2011-04-06
CID A-A-52547/2
HOSE ASSEMBLY, RUBBER: FUEL AND OIL, LOW PRESSURE, FLARED TUBE (S/S BY MS52104B)
橡胶软管组件:燃油和机油低压扩口管（S/S由MS52104B提供）
1996-02-26
SAE AS6709-3
AS6709 Typical Assy's of Aluminum Alloy Low Pressure Union for 3/8" DIA. Tubing
AS6709铝合金低压接头典型组件 直径为3/8” 油管
1973-11-01
BS EN ISO 18082-2014+A1-2017
Anaesthetic and respiratory equipment. Dimensions of non-interchangeable screw-threaded (NIST) low-pressure connectors for medical gases
麻醉和呼吸设备 医用气体用非可互换螺纹（NIST）低压连接器的尺寸
2019-09-20
ISO 18082-2014
Anaesthetic and respiratory equipment — Dimensions of non-interchangeable screw-threaded (NIST) low-pressure connectors for medical gases
麻醉和呼吸设备 - 用于医疗气体的不可互换螺纹（Nist）低压连接器的尺寸
2014-06-06