SJ 20446-1994
锆钒铁吸气剂规范
Specification for Zr-V-Fe getter
1994-09-30
DIN 28429
Vacuum technology - Acceptance specifications for ion getter pumps
真空技术.离子吸气剂泵的验收规范
2014-05-01
ASTM B941-24
Standard Specification for Heat Resistant Aluminum-Zirconium Alloy Wire for Electrical Purposes
电气用耐热铝锆合金导线标准规范
2024-04-01
BS TA 44-1972
Specification for forgings of titanium-aluminium-zirconium-molybdenum-silicon alloy (tensile strength 990-1140 N/mm2) (limiting ruling section 65 mm)
钛铝锆钼硅合金锻件规范（抗拉强度990-1140 N/mm^2）（极限截面65 mm）
1972-06-14
BS TA 43-1972
Specification for forging stock of titanium-aluminium-zirconium-molybdenum-silicon alloy (tensile strength 990-1140 N/mm2) (limiting ruling section 65 mm)
钛铝锆钼硅合金锻坯规范（抗拉强度990-1140 N/mm^2）（极限截面65 mm）
1972-06-14
ASTM F2924-14(2021)
Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium with Powder Bed Fusion
粉末层熔合添加剂制造钛-6铝-4钒的标准规范
2021-10-01
EN ISO 3262-18-2023
Extenders - Specifications and methods of test - Part 18: Precipitated sodium aluminium silicate (ISO 3262-18:2023)
填充剂规范和试验方法第18部分:沉淀硅酸钠铝
2023-08-02
ISO 3262-18-2023
Extenders — Specifications and methods of test — Part 18: Precipitated sodium aluminium silicate
填充剂规范和试验方法第18部分:沉淀硅酸钠铝
2023-07-28
KS M ISO 3262-18(2017 Confirm)
도료용 체질안료-품질규격과 시험방법-제18부 : 침강성 규산나트륨 알루미늄
涂料填充剂规范和试验方法第18部分:沉淀硅酸钠铝
2007-09-28
KS M ISO 3262-18
도료용 체질안료 — 품질과 시험방법 —제18부: 침강성 규산나트륨 알루미늄
涂料用填充剂.规范和试验方法.第18部分:沉淀硅酸钠铝
2021-04-26
ASTM F3001-14(2021)
Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium ELI (Extra Low Interstitial) with Powder Bed Fusion
用粉末层熔合添加剂制造钛-6铝-4钒ELI（超低间隙）的标准规范
2021-10-01
BS L 119-1975
Specification for ingots and castings of aluminium-copper-nickel-manganese-titanium-zirconium-cobalt-antimony alloy (solution treated and artificially aged) (Cu 5.0, Ni 1.5, Mn 0.25, Ti 0.2, Zr 0.2, Co 0.2, Sb 0.2)
铝-铜-镍-锰-钛-锆-钴-锑合金（固溶处理和人工时效）锭和铸件规范（Cu 5.0 Ni 1.5 Mn 0.25 Ti 0.2 Zr 0.2 Co 0.2 Sb 0.2）
1975-09-30
DIN 55626-18
Extenders and pigments for paper and board - Specifications and methods of test - Part 18: Precipitated sodium aluminium silicate
纸和纸板用填充剂和颜料.规范和试验方法.第18部分:沉淀硅酸钠铝
2007-07-01
UNE-EN ISO 3262-18-2001
Extenders for paints - Specifications and methods of test - Part 18: Precipitated sodium aluminium silicate. (ISO 3262-18:2000)
涂料用填充剂.规范和试验方法.第18部分:沉淀硅酸钠铝 （ISO 3262-18-2000）
2001-03-31