现行 NB/T 47065.4-2018
容器支座 第4部分:支承式支座 容器支座 第4部分:支承式支座 Vessel support-Part 4:Bracket support
发布日期:2018-04-03
实施日期:2018-07-01
分类信息
发布单位或类别: 中国 行业标准-能源
CCS分类: J74机械 - 通用机械与设备 - 压力容器
ICS分类: 23
研制信息

归口单位: 全国锅炉压力容器标准化技术委员会

起草单位: 东华工程科技股份有限公司

起草人: 刘吉祥、 殷道纯、 刘晓林

标准简介

本部分规定了支承式支座的型式特征、系列参数及尺寸、材料、标记、制造技术要求及选用说明。本部分适用于下列条件的钢制立式圆筒形容器:a)公称直径DN800mm~DN4000mm;b)圆筒长度L与公称直径DN之比L/DN不大于5;c)容器总高度Ho不大于10m;d)允许使用温度-20℃~200℃

相似标准/计划/法规
DIN 28083-2
Bracket supports; maximum bending moments imposed on the vessel wall resulting from type A bracket support loads
支架;A型支架支撑荷载对容器壁施加的最大弯矩
1987-01-01
BS PD CEN/TR 13445-102-2015
Unfired pressure vessels-Example of application of vertical vessel with bracket supports
非燃烧压力容器
2015-09-30
NB/T 47065.1-2018
容器支座 第1部分:鞍式支座
Vessel support-Part 1: Saddle support
2018-04-03
NB/T 47065.2-2018
容器支座 第2部分:腿式支座
Vessel support-Part 2: Leg support
2018-04-03
NB/T 47065.3-2018
容器支座 第3部分:耳式支座
Vessel support-Part 3: Lug support
2018-04-03
NB/T 47065.5-2018
容器支座 第5部分:刚性环支座
Vessel support-Part 5: Support lugs with rigid rings
2018-04-03
DIN 28145-4
Parts welded to glass lined agitator vessels; support rings
焊接到搪玻璃搅拌容器上的零件;支撑环
1993-12-01
DIN 28082-2
Skirts for apparatus - Part 2: Bottom ring with bracket supports or twin ring with webs
仪器用裙板.第2部分:带支架的底环或带腹板的双环
2016-08-01
DIN 28145-8
Parts welded to glass lined agitator vessels; tubular and profile support
焊接到搪玻璃搅拌容器上的零件;管状和异型支架
1993-04-01
SCTE 135-4 2019
DOCSIS 3.0 Part 4: Operations Support Systems Interface
DOCSIS 3.0第4部分:操作支持系统接口
UNE 20654-4-2002
Guide on maintainability of equipment - Part 4 - 8: Maintenance and maintenance support planning.
设备维修性指南.第4-8部分:维护和维护支持计划
2002-04-30
ISO/IEC 11889-4-2015
Information technology - Trusted Platform Module Library - Part 4: Supporting Routines
信息技术 - 可信平台模块库 - 第4部分:支持例程
2015-12-15
ISO/IEC 11889-4-2015
Information technology — Trusted Platform Module Library — Part 4: Supporting Routines
信息技术 - 可信平台模块库 - 第4部分:支持例程
2015-12-15
UNE-EN 60068-3-4-2002
Environmental testing -- Part 3-4: Supporting documentation and guidance - Damp heat tests.
环境试验第3-4部分:支持文件和指南湿热试验
2002-11-25
SCTE 262-4 2020
DOCSIS 4.0 Part 4: CCAP(TM) Operations Support System Interface Specification
DOCSIS 4.0第4部分:CCAP(TM)运行支持系统接口规范
KS C IEC 60068-3-4(2020 Confirm)
환경 시험-제3-4부:지원문서 및 지침-내습성 시험
环境试验第3-4部分:支持性文件和指南湿热试验
2010-02-25
GB/T 33846.4-2017
信息技术 SOA支撑功能单元互操作 第4部分:服务编制
Information technology—SOA supportive functional units interoperability—Part 4: Service orchestration
2017-11-01
IEC 60068-3-4-2023 RLV
Environmental testing - Part 3-4: Supporting documentation and guidance - Damp heat tests
环境试验.第3-4部分:支持文件和指南.湿热试验
2023-06-29
IEC 60068-3-4-2023
Environmental testing - Part 3-4: Supporting documentation and guidance - Damp heat tests
环境试验.第3-4部分:支持文件和指南.湿热试验
2023-06-29
YD/T 1926.4-2010
IT运维服务管理技术要求 第4部分:服务管理支撑系统
Technical specification for IT operations and maintenance service management. Part 4:service management support system
2010-12-29
支座支承容器

最后更新时间 2025-09-02