NB/T 47042-2014
卧式容器
Horizontal vessels on saddle supports
2014-06-29
JIS B 8278-2003
Saddle supported horizontal pressure vessels
鞍座支撑卧式压力容器
2003-01-01
KS B 6725(2020 Confirm)
새들 지지의 수평 압력 용기
以鞍座支撑之卧型压力容器
2015-12-21
BS 5276-2-2003
Pressure vessel details (dimensions)-Specification for saddle supports for horizontal cylindrical pressure vessels
压力容器详图（尺寸）
2003-07-07
NB/T 47065.4-2018
容器支座 第4部分:支承式支座
Vessel support-Part 4:Bracket support
2018-04-03
NB/T 47065.2-2018
容器支座 第2部分：腿式支座
Vessel support-Part 2: Leg support
2018-04-03
NB/T 47065.3-2018
容器支座 第3部分：耳式支座
Vessel support-Part 3: Lug support
2018-04-03
NB/T 47065.5-2018
容器支座 第5部分:刚性环支座
Vessel support-Part 5: Support lugs with rigid rings
2018-04-03
DIN 28145-4
Parts welded to glass lined agitator vessels; support rings
焊接到搪玻璃搅拌容器上的零件；支撑环
1993-12-01
JB/T 7652.1-2008
冲模限位支承装置 第1部分：支承套件
Limiting and supporting units of stamping dies--Part 1:Supporting sets
2008-02-01
BS PD 6497-1982
Stresses in horizontal cylindrical pressure vessels supported on twin saddles: a derivation of the basic equations and constants used in G.3.3 of BS 5500:1982
双鞍座支撑的水平圆柱形压力容器中的应力:BS 5500:1982 G.3.3中使用的基本方程和常数的推导
1982-09-30
DIN 28145-8
Parts welded to glass lined agitator vessels; tubular and profile support
焊接到搪玻璃搅拌容器上的零件；管状和异型支架
1993-04-01
DIN 21530-1
Mine support - Part 1: General
矿井支护.第1部分:总则
2003-05-01
GB/T 17116.1-2018
管道支吊架 第1部分：技术规范
Pipe supports and hangers—Part 1:Technical specification
2018-03-15
UNE-EN 1804-1-2003+A1-2010
Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 1: Support units and general requirements
地下矿山机械.液压屋顶支架的安全要求.第1部分:支架装置和一般要求
2010-05-26
AS 3891.1-2021
Air navigation - Cables and their supporting structures - Marking and safety requirements, Part 1: Marking of overhead cables and supporting structures
航空导航电缆及其支撑结构标记和安全要求第1部分:架空电缆和支撑结构的标记
2021-05-28
GB 25974.1-2010
煤矿用液压支架 第1部分：通用技术条件
Powered support for coal mine － Part 1: General specification
2011-01-10
DIN 28145-1
Parts welded to glass lined steel agitator vessels - Part 1: Support for baffle Form S for vessels nominal diameter 2400 to 3600 mm; connecting dimensions; interaktive for new design
焊接到搪玻璃钢搅拌容器上的零件.第1部分:公称直径2400至3600 mm的容器用挡板模板S支架；连接尺寸；新设计的互动
1999-11-01
GB/T 44936.1-2024
老年人交流辅助用图形符号 第1部分：表示规则
Graphical symbols for communication support of the elderly—Part 1: Design principles
2024-11-28
UNE-EN 12312-1-2002
Aircraft ground support equipment - Specific requirements - Part 1: Passenger stairs.
飞机地面支持设备.特殊要求.第1部分:乘客楼梯
2002-05-30