现行 QB/T 5304-2018
雨水蓄水池用塑料模块 雨水蓄水池用塑料模块 Plastic module for rainwater storage tank
发布日期:2018-10-22
实施日期:2019-04-01
分类信息
研制信息

归口单位: 全国塑料制品标准化技术委员会

起草单位: 北京市建筑设计研究院有限公司、 北京市建设工程物资协会、 轻工业塑料加工应用研究所、 国家化学建筑材料测试中心(材料测试部)、 北京市市政工程设计研究总院有限公司、 国家节水器具产品质量监督检验中心、 江苏河马井股份有限公司、 积水技术成型株式会社、 深圳市雨博士雨水利用设备有限公司、 承德市金建检测仪器有限公司、 中国建筑设计院有限公司、 北京市水科学技术研究院

起草人: 孙晋、 郑克白、 刘山生、 陈重、 翠立晓、 邹仲元、 李延军、 王真杰、 李建业、 周敏伟、 刘谊、 刘哲维、 戚德军、 任雨峰、 张书函、 金勇

标准简介

本标准规定了雨水蓄水池用塑料模块的材料、分类、要求、试验方法、检验规则、标志、包装、运输、贮存。本标准适用于以聚丙烯树脂为主要原料注塑加工成型的镂空结构雨水模块,所组装雨水蓄水池的池顶覆土在0.5m ~ 4.0m之间,池底埋深不超过7.5m

相似标准/计划/法规
GB/T 40224-2021
雨水渗透、调蓄、储存用塑料模块
Plastic boxes used for rainwater infiltration,attenuation and storage
2021-05-21
API Publ 1663B
Underground Storage Tank Installation Training Module
地下储罐安装培训模块
UNE 53991-2004 IN
PLASTICS. REPAIRING AND INTERNAL COVERING OF METALLIC TANKS, FOR STORAGING LIQUID FUEL, WITH REINFORCED PLASTICS.
塑料 用增强塑料修理和覆盖储存液体燃料的金属罐
2004-03-18
UNE 53496-2-2007
Plastics. Glass reinforced plastic tanks, in the air or in hold, for storaging fuel-oil. Part 2: Specifications for horizontal and vertical tanks
塑料 空气或货舱中的玻璃钢储罐 用于储存燃油 第2部分:卧式和立式储罐规范
2007-05-09
BS EN 976-2-1997
Underground tanks of glass-reinforced plastics (GRP). Horizontal cylindrical tanks for the non-pressure storage of liquid petroleum based fuels-Transport, handling, storage and installation of single wall tanks
玻璃钢(GRP)地下储罐 卧式圆柱形储罐 用于无压储存液态石油基燃料 单壁储罐的运输、搬运、储存和安装
1997-12-15
API Publ 1663A
Underground Storage Tank Installation Training Module - SET - Includes API 1663B, 1663C, 1663D, and 1663E
地下储罐安装培训模块-套装-包括API 1663B、1663C、1663D和1663E
UNE-EN 976-2-1998
UNDERGROUND TANKS OF GLASS-REINFORCED PLASTICS (GRP). HORIZONTAL CYLINDRICAL TANKS FOR THE NON-PRESSURE STORAGE OF LIQUID PETROLEUM BASE FUELS. PART 2: TRANSPORT, HANDLING, STORAGE AND INSTALLATION OF SINGLE WALL TANKS.
玻璃钢(GRP)地下储罐 卧式圆柱形储罐 用于无压储存液态石油基燃料 第2部分:单壁储罐的运输、搬运、储存和安装
1998-07-29
BS 976-4-1997
Underground tanks of glass-reinforced plastics (GRP). Horizontal cylindrical tanks for the non-pressure storage of liquid petroleum based fuels. Part 4. Transport, handling, storage and installation of double wall tanks
玻璃钢(GRP)地下储罐 卧式圆柱形储罐 用于无压储存液态石油基燃料 第四部分 双层罐的运输、搬运、储存和安装
1997-06-26
AWWA D121-12
Bolted Aboveground Thermosetting Fiberglass-Reinforced Plastic Panel-Type Tanks for Water Storage
地上螺栓连接的热固性玻璃纤维增强塑料板储水罐
2012-06-01
UNE 53496-1-2007
Plastics. Glass reinforced plastic tanks, in the air or in hold, for storaging fuel-oil. Part 1: General characteristics
塑料 空气或货舱中的玻璃钢储罐 用于储存燃油 第1部分:一般特征
2007-05-09
UNE 53990-2000 IN
Plastics. Installation of glass reinforced plastics (GRP) tanks above ground for storaging of liquid petroleum based fuels.
塑料 在地面上安装玻璃钢(GRP)储罐 用于储存液态石油基燃料
2000-09-21
SSPC PA 6/NACE No.10
Fiberglass-Reinforced Plastic (FRP) Linings Applied to Bottoms of Carbon Steel Aboveground Storage Tanks
应用于碳钢地上储罐底部的玻璃纤维增强塑料(FRP)衬里
2002-02-01
MIL MIL-T-52777A Notice 1-Cancellation
TANKS, STORAGE, UNDERGROUND, GLASS FIBER REINFORCED PLASTIC (S/S BY ASTM-D4021-1992)
玻璃纤维增强塑料地下储罐(ASTM-D4021-1992标准S/S)
1991-12-09
GB/T 32380-2015
用于石油产品、乙醇汽油的玻璃纤维增强塑料地下贮罐
Glass fiber reinforced plastic underground storage tank for petroleum products and alcohol gasoline mixture
2015-12-31
UNE 62351-4-1999
STEEL STORAGE TANKS FOR CARBURANT AND COMBUSTIBLE LIQUIDS. TANKS WITH CAPACITY UP TO 3 000 LITRES. PART 4: DOUBLE SKIN TANKS (STEEL-GLASSFIBRE REINFORCED PLASTIC).
用于储存化油剂和可燃液体的钢制储罐 容量不超过3000升的储罐 第4部分:双层罐(钢-玻璃纤维增强塑料)
1999-12-16
BS EN 976-1-1997
Underground tanks of glass-reinforced plastics (GRP). Horizontal cylindrical tanks for the non-pressure storage of liquid petroleum based fuels-Requirements and test methods for single wall tanks
玻璃钢(GRP)地下储罐 卧式圆柱形储罐 用于无压储存液态石油基燃料 单壁储罐的要求和试验方法
1997-12-15
UL 1316
Glass Fiber Reinforced Plastic Underground Storage Tanks for Petroleum Products, Alcohols, and Alcohol-Gasoline Mixtures
石油产品、酒精和酒精汽油混合物用玻璃纤维增强塑料地下储罐
2018-11-21
UNE 62350-4-2011
Steel storage tanks for carburant and combustible liquids. Tanks with capacity greater than 3 000 litres. Part 4: Horizontal double skin tanks (steel-glassfibre reinforced plastic).
用于储存化油剂和可燃液体的钢制储罐 容量大于3000升的储罐 第4部分:卧式双层罐(钢玻璃纤维增强塑料)
2011-01-19
BS 976-3-1997
Underground tanks of glass-reinforced plastics (GRP). Horizontal cylindrical tanks for the non-pressure storage of liquid petroleum based fuels. Part 3. Requirements and test methods for double wall tanks
玻璃钢(GRP)地下储罐 卧式圆柱形储罐 用于无压储存液态石油基燃料 第三部分 双壁储罐的要求和试验方法
1997-06-26
UNE-EN 976-1-1998
UNDERGROUND TANKS OF GLASS-REINFORCED PLASTICS (GRP). HORIZONTAL CYLINDRICAL TANKS FOR THE NON-PRESSURE STORAGE OF LIQUID PETROLEUM BASED FUELS. PART 1: REQUIREMENTS AND TEST METHODS FOR SINGLE WALL TANKS.
玻璃钢(GRP)地下储罐 卧式圆柱形储罐 用于无压储存液态石油基燃料 第1部分:单壁储罐的要求和试验方法
1998-07-29
塑料蓄水池雨水模块

最后更新时间 2025-09-02