现行 JB/T 13467-2018
无损检测 扫描激光激励超声场可视化检测方法 无损检测 扫描激光激励超声场可视化检测方法 Non-destructive testing-Test method for scanning laser excitation ultrasonic field visual泣ing inspection technique
发布日期:2018-04-30
实施日期:2018-12-01
分类信息
研制信息

归口单位: 全国无损检测标准化技术委员会

起草单位: 西安金波检测仪器有限责任公司、 爱德森(厦门)电子有限公司、 中国科学院金属研究所、 中国科学院声学研究所、 北京航空材料研究院、 南昌航空大学

起草人: 王波、 蔡桂喜、 沈建中、 史亦韦、 林俊明、 卢超、 赵晋成

标准简介

本标准规定了扫描激光激励超声场可视化检测方法。本标准适用于对壁厚不大于50mm的固体材料或工件的表面、近表面和内部的缺陷(如裂纹、气孔、腐蚀等)进行扫描激光激励超声波传播可视化的无损检测。本标准不适用于超声波传播衰减较大(接收信号的信噪比小于6dB)及曲率较大(入射激光与工件界面法线夹角大于60°)的复杂形面固体材料或工件

相似标准/计划/法规
GB/T 34018-2017
无损检测 超声显微检测方法
Non-destructive testing—Test method for scanning ultrasonic microscopy
2017-07-12
GB/T 34361-2017
无损检测 扫频涡流检测方法
Non-destructive testing—Test method for frequency scanning eddy current testing
2017-10-14
GB/T 34886-2017
无损检测 复合材料激光错位散斑检测方法
Non-destructive testing—Test method for laser shearography of composite materials
2017-11-01
DIN EN 17501-DRAFT
Draft Document - Non-destructive testing - Thermographic testing - Active thermography with laser excitation; German and English version prEN 17501:2020
文件草案——无损检测——热成像检测——激光激励主动热成像;德文和英文版本prEN 17501:2020
2020-05-01
BS ISO 23159-2020
Non-destructive testing. Gamma ray scanning method on process columns
无损检测 工艺柱的γ射线扫描法
2020-07-02
KS B ISO 23159
비파괴검사 — 공정 칼럼의 감마선 스캔 방법
无损检测.工艺柱上的伽马射线扫描法
2022-11-18
GB/T 43618-2023
无损检测 工艺塔伽马射线扫描方法
Non-destructive testing—Gamma ray scanning method on process columns
2023-12-28
ISO 23159-2020
Non-destructive testing — Gamma ray scanning method on process columns
无损检测.工艺柱上的γ射线扫描法
2020-06-30
BS EN 12543-1-1999
Non-destructive testing. Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing-Scanning method
无损检测 无损检测用工业X射线系统中焦点的特性
1999-12-15
UNE-EN 12543-1-2000
NON-DESTRUCTIVE TESTING - CHARACTERISTICS OF FOCAL SPOTS IN INDUSTRIAL X-RAY SYSTEMS FOR USE IN NON-DESTRUCTIVE TESTING - PART 1: SCANNING METHOD.
无损检测.无损检测用工业X射线系统中焦点的特性.第1部分:扫描法
2000-04-17
GB/T 25758.1-2010
无损检测 工业X射线系统焦点特性 第1部分:扫描方法
Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 1: Scanning method
2010-12-23
JB/T 9214-2010
无损检测 A型脉冲反射式超声检测系统工作性能测试方法
Non-destructive testing--Test methods for evaluating performance characteristics of A-scan pulse-echo ultrasonic testing systems
2010-02-21
DIN EN 12543-1
Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 1: Scanning method
无损检测.无损检测用工业X射线系统中焦点的特性.第1部分:扫描法;德语版本EN 12543-1:1999
1999-12-01
无损检测可视化超声扫描激励

最后更新时间 2025-09-02