现行 SY/T 4110-2019
钢质管道聚乙烯内衬技术规范 钢质管道聚乙烯内衬技术规范 Technical specification of polyethylene liners for steel pipelines
发布日期：2019-11-04
实施日期：2020-05-01
分类信息
发布单位或类别： 中国 行业标准-石油
CCS分类： E98石油 - 石油勘探、开发、集输设备 - 油、气集输设备
ICS分类： 75.200石油及相关技术 - 石油、石油产品和天然气储运设备
研制信息

归口单位： 石油工业标准化技术委员会石油工程建设专业标准化委员会

起草单位： 中国石油集团工程技术研究有限公司、 西安长庆科技工程有限责任公司、 扬州苏油三圆技术有限公司、 河北建投宝塑管业有限公司

起草人： 韩文礼、 王志涛、 孙银娟、 周拾庆、 王辉、 杨耀辉、 张彦军、 代启勇、 娄亮杰、 张红磊、 成杰

标准简介

本规范适用于直径不大于DN700、长期使用温度不超过75℃的钢质管道现场聚乙烯内衬的材料、设计、施工安装、验收等

相似标准/计划/法规
CECS 131-2002
埋地钢骨架聚乙烯复合管燃气管道工程技术规程(附条文说明)
Technical specification for buried steel skeleton polyethylene fuel gas pipeline engineering
CECS 248-2008
聚乙烯塑钢缠绕排水管管道工程技术规程(附条文说明)
Technical specification for steel-reinforced spirally wound polyethylene of drainage pipeline engineering
GB/T 27699-2023
钢质管道内检测技术规范
Technical specification for in-line inspection of steel pipeline
2023-05-23
CECS 210-2006
埋地聚乙烯钢肋复合缠绕排水管管道工程技术规程
Technical specification for helical winding polyethylene profile wall with external steel rib pipeline of buried sewer engineering
CECS 211-2006
自动门应用技术规程
Technical specification for helical winding polyethylene profile wall with external steel rib pipeline of buried sewer engineering
CECS 105-2000
建筑给水铝塑复合管管道工程技术规程
Technical specification for polyethylene-aluminum composite pipeline engineering of building water supply
CECS 264-2009
建筑燃气铝塑复合管管道工程技术规程(附条文说明)
Technical specification for polyethylene-aluminum composite pipeline engineering for building gas supply
GB/T 28055-2023
钢质管道带压封堵技术规范
Technical specification for hot tapping and plugging on steel pipeline
2023-05-23
NB/T 20159-2021
压水堆核电厂安全壳钢衬里施工技术规程
The construction technical specification for steel liner of PWR nuclear power plant
2021-04-26
YB/T 4768-2019
绿色设计产品评价技术规范 管线钢
Technical specification for green-design product assessment-Pipeline steel
2019-12-02
CECS 329-2012
钢制承插口预应力混凝土管管道工程技术规程(附条文说明)
Technical specification for steel-ring prestressed concrete pipeline engineering
SY/T 0457-2019
钢质管道液体环氧涂料内防腐技术规范
Technical specification of liquid epoxy internal coating for steel pipeline
2019-11-04
BS EN 2064-1992
Bearings, spherical plain in corrosion resisting steel with self lubricating liner. Technical specification
带自润滑衬套的耐蚀钢制球面滑动轴承 技术规格
1992-08-15
CECS 206-2006
钢外护管真空复合保温预制直埋管道技术规程
Technical specification for steel jacket pre-insulated pipeline with vacuum layer
CJJ 95-2013
城镇燃气埋地钢质管道腐蚀控制技术规程(附条文说明)
Technical specification for external corrosion control of buried steel pipeline for city gas
2013-11-08
SY/T 0324-2014
直埋高温钢质管道保温技术规范
Technical specification for thermal insulation of directly buried high temperature steel pipeline
2014-10-15
T/CITS 415-2025
埋地钢质管道阴极保护智能监测系统技术规范
Technical specification for intelligent monitoring system for cathodic protection of buried steel pipelines
2025-05-23
BS ISO 10792-3-1995
Aerospace. Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner-Technical specification
航空航天带自润滑衬套的耐腐蚀钢制机身球面滑动轴承
1996-01-15
CECS 181-2005
给水钢丝网骨架塑料(聚乙烯)复合管管道工程技术规程(附条文说明)
Technical specification for steel wire mesh and plastic (PE) composite pipe of water supply pipeline
GB/T 37587-2019
埋地钢质弯管聚乙烯防腐带耐蚀作业技术规范
Technical specification for corrosion resistance of buried steel bend pipe polyethylene anti-corrosion tapes
2019-06-04
管道内衬聚乙烯钢质

最后更新时间 2025-09-02