JB/T 9753.3-2011
内燃机 气缸盖与机体 第3部分:灰铸铁气缸盖和机体铸件 技术条件
Internal combustion engines--Cylinder heads and cylinder blocks--Part 3:Cray iron cylinder head and cylinder block castings--Specifications
2011-05-18
JB/T 9753.1-2011
内燃机 气缸盖与机体 第1部分：铸铁机体 技术条件
Internal combustion engines--Cylinder heads and cylinder blocks--Part 1:Cast iron cylinder blocks--Specifications
2011-05-18
JB/T 7762-2018
内燃机气缸盖垫片 技术条件
Cylinder head gaskets of internal combustion engines-Specifications
2018-07-04
JB/T 13339-2018
再制造内燃机 机体工艺规范
Remanufacfured internal combustion engines-Cylinder block process specifications
2018-02-09
JB/T 13340-2018
再制造内燃机 缸盖工艺规范
Remanufactured internal combustion engines - Cylinder head process specifications
2018-02-09
JB/T 11777-2014
内燃机 铸造铝合金气缸盖 技术条件
Internal combustion engines - Cast aluminum cylinder heads - Specification
2014-05-12
JB/T 7293.5-2015
内燃机 螺栓与螺母 第5部分：气缸盖螺栓 技术条件
Internal combustion engines - Bolts and nuts - Part 5:Cylinder head bolts - Specification
2015-04-30
JB/T 11777.2-2017
内燃机 铸造铝合金气缸盖 第2部分：毛坯
Internal combustion engines-Cast aluminum cylinder beads-Part 2: Blank
2017-01-09
JB/T 7293.7-2015
内燃机 螺栓与螺母 第7部分：气缸盖螺母及飞轮螺母 技术条件
Internal combustion engines - Bolts and nuts - Part 7:Cylinder head and flywheel nuts - Specification
2015-04-30
JB/T 5082.3-2016
内燃机 气缸套 第3部分:干式铸铁气缸套 技术条件
Internal combustion engines-Cylinder liners-Part 3:Dry cast-iron cylinder liners-Specifications
2016-01-15
JB/T 5082.6-2014
内燃机 气缸套 第6部分:激光淬火气缸套技术条件
Internal combustion engines - Cylinder liners - Part 6:Technology specifications of laser-quench cylinder liners
2014-05-06
JB/T 5082.5-2018
内燃机 气缸套 第5部分：钢质镀铬气缸套技术条件
Internal combustion engines-Cylinder liners-Part 5: Specifications for chromium-plating steel cylinder liners
2018-04-30
UNE 26340-1992
RECIPROCATING INTERNAL COMBUSTION ENGINES. DESIGNATION OF THE DIRECTION OF ROTATION AND OF CYLINDERS AND VALVES IN CYLINDER HEADS, AND DEFINITION OF RIGHT-HAND AND LEFT-HAND IN-LINE ENGINES AND LOCATION ON AN ENGINE.
往复式内燃机 气缸和气缸盖中阀门的旋转方向和名称 以及右侧和左侧直列发动机的定义和发动机上的位置
1992-09-21
DIN ISO 1204
Reciprocating internal combustion engines - Designation of the direction of rotation and of cylinders and valves in cylinder heads, and definition of right-hand and left-hand in-line engines and locations on an engine
往复式内燃机.气缸旋转方向和气缸盖中气缸和阀门的命名.右侧和左侧直列式发动机的定义和发动机上的位置
1994-11-01
GB/T 726-1994
往复式内燃机 旋转方向、气缸和气缸盖上气门的标志及直列式内燃机右机、左机和发动机方位的定义
Reciprocating internal combustion engines--Designation of the direction of rotation and of cylinders and valves in cylinder heads and definition of right-hand and left-hand in line engines and locations on an engine
1994-12-27
ISO 1204-1990
Reciprocating internal combustion engines — Designation of the direction of rotation and of cylinders and valves in cylinder heads, and definition of right-hand and left-hand in-line engines and locations on an engine
往复式内燃机——气缸旋转方向和气缸盖中气缸和气门的名称 以及右侧和左侧直列发动机的定义和发动机上的位置
1990-12-13
GOST 33786-2016
Прокладки головки цилиндров и системы газопроводов для двигателей внутреннего сгорания. Общие технические требования
用于内燃机的气缸盖垫片和气体管道系统 一般技术要求
2016-04-20
BS 5672-1991
Specification for designation of the direction of rotation and of cylinders and valves in cylinder heads, and definition of right-hand and left-hand in-line engines and locations on an engine for reciprocating internal combustion engines
气缸旋转方向和气缸盖中气缸和阀门的命名规范 以及往复式内燃机用右侧和左侧直列发动机和发动机上位置的定义
1991-05-31
JB/T 5082.2-2011
内燃机 气缸套 第2部分：高磷铸铁金相检验
Internal combustion engines--Cylinder liners--Part 2:Metallographic inspections for high phosphorous cast iron
2011-05-18
JB/T 5082.1-2008
内燃机 气缸套 第1部分：硼铸铁金相检验
Internal combustion engines--Cylinder liners--Part 1:Metallographic inspections for boracic cast iron
2008-02-01