现行 YB/T 118-2020
耐火材料 气孔孔径分布试验方法 耐火材料 气孔孔径分布试验方法
发布日期:2020-12-09
实施日期:2021-04-01
分类信息
研制信息

归口单位: 全国耐火材料标准化技术委员会

起草单位: 武汉钢铁有限公司、 中钢集团洛阳耐火材料研究院有限公司、 中冶南方邯郸武彭炉衬新材料有限公司、 河南瑞泰耐火材料科技有限公司、 河南安耐克实业有限公司

起草人: 卢正东、 邹祖桥、 何涛、 李龙飞、 陈文、 马历乔、 翟鹏涛、 李洪涛、 李富朝、 尹坤宝

标准简介

本标准规定了耐火材料气孔孔径分布的试验原理、试验仪器和设备、试验步骤、试验结果和计算、试验报告。本标准适用于测定耐火材料的开口气孔的孔径分布、平均孔径、小于1 μm气孔的孔容积占总孔容积百分率和大于1 μm气孔的孔容积占耐火材料体积百分率。测试孔径范围0.006 m~360 m

相似标准/计划/法规
AS 1774.22-2000
Refractories and refractory materials - Physical test methods, Method 22: Refractory mortar - Test methods
耐火材料和耐火材料.物理试验方法 方法22:耐火砂浆.试验方法
2000-11-29
AS 1774.32-2002
Refractories and refractory materials - Physical test methods, Method 32: Refractory products containing carbon - Test methods
耐火材料和耐火材料.物理试验方法 方法32:含碳耐火制品.试验方法
2002-05-02
AS 1774.14-2008
Refractories and refractory materials - Physical test methods, Method 14: Thermal conductivity
耐火材料和耐火材料.物理试验方法 方法14:热导率
2008-12-04
AS 1774.4.4-2001
Refractories and refractory materials - Physical test methods, Method 4.4: Preparation of test pieces - Mouldable refractories
耐火材料和耐火材料.物理试验方法 方法4.4:试样制备.可模制耐火材料
2001-03-08
AS 1774.4.5-2002
Refractories and refractory materials - Physical test methods, Method 4.5: Preparation of test pieces - Gunning refractories
耐火材料和耐火材料.物理试验方法 方法4.5:试样制备.喷补耐火材料
2002-11-13
BS 1902-5.8-1992
Methods of testing refractory materials. Refractory and thermal properties-Determination of thermal conductivity (split column method) (method 1902-508)
耐火材料的试验方法 耐火材料和热性能
1992-07-15
BS 1902-5.13-1984
Methods of testing refractory materials. Refractory and thermal properties-Determination of resistance to attack by slag (method 1902-513)
耐火材料的试验方法 耐火材料和热性能
1984-05-31
BS 1902-5.3-1990
Methods of testing refractory materials. Refractory and thermal properties-Determination of thermal expansion (horizontal method to 1100°C) (method 1902-503)
耐火材料的试验方法 耐火材料和热性能
1990-05-31
BS 1902-5.14-1992
Methods of testing refractory materials. Refractory and thermal properties-Determination of thermal expansion (temperatures up to 1500°C) (methods 1902-5.14)
耐火材料的试验方法 耐火材料和热性能
1992-06-15
BS 1902-5.11-1986
Methods of testing refractory materials. Refractory and thermal properties-Determination of thermal spalling resistance by the prism test (method 1902-511)
耐火材料的试验方法 耐火材料和热性能
1986-07-31
BS 1902-5.0-1992
Methods of testing refractory materials. Refractory and thermal properties-Introduction
耐火材料的试验方法 耐火材料和热性能
1992-06-15
BS 1902-5.5-1991
Methods of testing refractory materials. Refractory and thermal properties-Determination of thermal conductivity (panel/calorimeter method) (method 1902-505)
耐火材料的试验方法 耐火材料和热性能
1991-08-30
AS 1774.29-2008
Refractories and refractory materials - Physical test methods, Method 29: Cast coverage
耐火材料和耐火材料.物理试验方法 方法29:铸件覆盖
2008-06-30
GB/T 7322-2017
耐火材料 耐火度试验方法
Refractory products—Determination of refractoriness
2017-09-07
AS 1774.4.3-1998
Refractories and refractory materials - Physical test methods, Method 4.3: Preparation of test pieces - Unshaped refractories on site
耐火材料和耐火材料.物理试验方法 方法4.3:试样制备.现场不定形耐火材料
1998-01-05
BS 1902-6-1986
Methods of testing refractory materials-Ceramic fibre products
耐火材料的试验方法
1986-11-28
AS 1774.13-2000
Refractories and refractory materials - Physical test methods, Method 13: Permanent dimensional change
耐火材料和耐火材料.物理试验方法 方法13:永久尺寸变化
2000-11-29
AS 1774.28-2007
Refractories and refractory materials - Physical test methods, Method 28: Ceramic fibre products - Test methods
耐火材料和耐火材料.物理试验方法 方法28:陶瓷纤维制品.试验方法
2007-09-28
AS 1774.21-2005
Refractories and refractory materials - Physical test methods, Method 21: Determination of workability index - Mouldable refractories
耐火材料和耐火材料.物理试验方法 方法21:和易性指数的测定.可模制耐火材料
2005-03-18
AS 1774.10-2002
Refractories and refractory materials - Physical test methods, Method 10: Pyrometric cone equivalent (refractoriness)
耐火材料和耐火材料.物理试验方法 方法10:高温锥当量(耐火度)
2002-05-16
气孔孔径试验方法分布

最后更新时间 2025-09-02