YB/T 4301-2012
高炉用炭素捣打料
Carbon tamping paste for blast furnace
2012-11-07
YB/T 4319-2012
高炉基建用炭质捣打料
Carbon ramming materials for blast furnace construction
2012-12-28
YB/T 4349-2013
高炉用碳化硅—碳质捣打料
Silicon carbide-carbon ramming materials for blast furnace
2013-04-25
YB/T 4234.2-2010
高炉煤气放散阀 第2部分：料罐均压、放散阀
Gas bleed valve for BFPart 2 Pressure equalizing / depressurizing valve for hopper
2010-11-10
T/ZZB 3191-2023
车用无焊压入式连接针
2023-09-01
DB37/T 2264-2012
车用骨架密封圈压入、脱出力的测定
2012-12-31
BS EN 12697-30-2018
Bituminous mixtures. Test methods-Specimen preparation by impact compactor
沥青混合料 测试方法 用冲击压实机制备试样
2019-01-14
MT/T 876-2000
煤用无压给料三产品重介质旋流器
Three-product dense-medium cyclone of coal with gravity feed
2000-12-08
MT/T 969-2005
煤用有压给料三产品重介质旋流器
Three-product dense-medium cyclone of coal with pressure feed
2006-01-17
ASTM D5361/D5361M-16(2022)
Standard Practice for Sampling Compacted Asphalt Mixtures for Laboratory Testing
实验室试验用压实沥青混合料取样的标准实施规程
2022-12-15
KS F 2377
선회 다짐기를 이용한 아스팔트 혼합물의 다짐 방법 및 밀도 시험 방법
制备和测定热熔胶密度的试验方法？用旋转压实机拌和沥青混合料
2016-12-28
KS F 2334
캘리포니아 반죽 다짐기에 의한 아스팔트 혼합물 공시체 제작 방법
用加利福尼亚捏合压实机制备沥青混合料试样的标准试验方法
2020-12-30
KS F 2377(2021 Confirm)
선회다짐시험기를 이용한 아스팔트 혼합물의 다짐방법 및 밀도 산출방법
用旋转压实机制备和测定热拌沥青混合料密度的试验方法
2016-12-28
EJ/T 472-2018
压水堆核电厂燃料组件定位格架用600号镍基钎料规范
2018-12-28
UNE-EN 12697-32-2003+A1-2007
Bituminous mixtures - Test methods for hot mix asphalt - Part 32: Laboratory compaction of bituminous mixtures by vibratory compactor
沥青混合料热拌沥青试验方法第32部分:用振动压实机在实验室压实沥青混合料
2007-12-27
ASTM D7380/D7380M-21
Standard Test Method for Soil Compaction Determination at Shallow Depths Using 2.3-kg [5-lbm] Dynamic Cone Penetrometer
用2.3-kg[5-lbm]动态圆锥贯入仪测定浅层土壤压实度的标准试验方法
2021-11-01
ASTM D6925-23
Standard Test Method for Preparation and Determination of the Relative Density of Asphalt Mix Specimens by Means of the Superpave Gyratory Compactor
用Superpave回转压实机制备和测定沥青混合料样品相对密度的标准试验方法
2023-12-01
DIN EN 12697-31-DRAFT
Draft Document - Bituminous mixtures - Test methods - Part 31: Specimen preparation by gyratory compactor; German version prEN 12697-31:2014
文件草案.沥青混合料.试验方法.第31部分:用旋转压实机制备试样；德文版prEN 12697-31:2014
2014-11-01
IEC 61076-4-107-2001
Connectors for electronic equipment - Part 4-107: Printed board connectors with assessed quality - Detail specification for shielded two-part connectors having a basic grid of 2,0 mm, fixed part with solder and press-in terminations for printed boards, free part with non-accessible insulation displacement and crimp terminations
电子设备连接器.第4-107部分:经质量评定的印制板连接器.基本网格为2.0mm的屏蔽两件式连接器详细规范.印制板用带焊料和压入终端的固定件 带不可接近绝缘位移和压接终端的自由件
2001-08-22
DIN EN 61076-4-107
Connectors for electronic equipment - Part 4-107: Printed board connectors with assessed quality; Detail specification for shielded two-part connectors having a basic grid of 2.0 mm, fixed part with solder and press-in terminations for printed boards, free part with non-accessible insulation displacement and crimp terminations (IEC 61076-4-107:2001); German version EN 61076-4-107:2001
电子设备连接器.第4-107部分:经质量评定的印制板连接器；基本网格为2.0mm的屏蔽两件式连接器详细规范 印制板用带焊料和压入终端的固定件 带不可接近绝缘层的自由件
2002-04-01