HB 3846-1986
吸物器
1986-07-14
WJ/Z 423.112-2000
履带式装甲车辆通用件 带滤清器吸油软管
KS P ISO 17190-11
요실금 기저귀 - 고분자 기반 흡수재의 특성화 시험방법 - 제11부: 흡입 입자의 함량 측정
尿失禁用吸尿器.试验材料.第11部分:可吸入颗粒物含量的测定
2021-12-20
JJF 1328-2011
带弹簧管压力表的气体减压器校准规范
Calibration Specification for Pressure Regulators with Bourdon Tube Pressure Gauge
2011-12-28
GOST 23693-1979
Соединения труб с трубными решетками и коллекторами теплообменных аппаратов. Требования к типовому технологическому процессу закрепления труб энергией взрыва взрывчатых веществ
管与管板和热交换器收集器的接头 通过爆炸物的爆炸能量制造管至管板接头的典型技术要求
DIN 19551-3
Wastewater treatment plants - Rectangular tanks - Part 3: Grit chambers with suction type sludge remover and sludge scraper; Types, main dimensions, equipment
废水处理厂.矩形槽.第3部分:带吸式除泥器和刮泥器的沉砂池；类型、主要尺寸、设备
2002-12-01
ASTM A498/A498M-25
Standard Specification for Seamless and Welded Carbon Steel Heat-Exchanger Tubes with Integral Fins
带整体翅片的无缝和焊接碳钢热交换器管
2025-05-01
ASTM B924-02(2022)
Standard Specification for Seamless and Welded Nickel Alloy Condenser and Heat Exchanger Tubes With Integral Fins
带整体翅片的无缝和焊接镍合金冷凝器和热交换器管
2022-10-01
AT-96-17-5
Hydroxide Absorption Heat Pumps with Spray Absorber
带喷雾吸收器的氢氧化物吸收式热泵
DIN 43764
Measurement and control; electrical temperature sensors; straight thermometers with interchangeable sensor units
测量和控制；电子温度传感器；带可互换传感器单元的直管温度计
1986-03-01
ASTM D3483-14(2022)
Standard Test Methods for Accumulated Deposition in a Steam Generator Tube
蒸汽发生器管中累积沉积物的标准试验方法
2022-11-01
NT-87-21-2
A Basic Surface Renewal/Penetration Model of Heat Transfer in Tubes with Turbulators for Application in Fire-Tube Boilers
用于火管锅炉的带扰流器管内传热的基本表面更新/穿透模型
ASTM B919-19
Standard Specification for Welded Copper Heat Exchanger Tubes With Internal Enhancement
带内加强件的焊接铜热交换器管的标准规范
2019-04-01
MIL MIL-D-87157/2
DISPLAYS, DIODE, LIGHT EMITTING, SOLID STATE, RED, ALPHANUMERIC, WITH ON BOARD DECODER/DRIVER (NO S/S DOCUMENT)
带车载解码器/驱动器的固态红色发光二极管字母数字显示器（无S/S文档）
1987-10-26
ASTM B1014-20
Standard Specification for Welded Copper and Copper Alloy Condenser and Heat Exchanger Tubes with a Textured Surface(s)
带纹理表面的焊接铜和铜合金冷凝器和热交换器管的标准规范
2020-10-01
VDI 3490 Sheet 17
Measurement of gases - Calibration gas mixtures - Dynamic preparation with thermal mass flow controllers
气体测量.校准气体混合物.带热质量流量控制器的动态制备
1998-08-01
DIN 49017-2
Conduits and fittings for electrical installation; rigid nonflame propagating insulating conduits and fittings; plain conduits with coupler and bends with coupler for light pressure strength
电气安装用导管和配件；刚性非火焰传播绝缘导管和配件；带耦合器的平面导管和带耦合器的弯管 用于轻型压力强度
1981-03-01
ASTM B359/B359M-23
Standard Specification for Copper and Copper-Alloy Seamless Condenser and Heat Exchanger Tubes With Integral Fins
带整体翅片的铜和铜合金无缝冷凝器和热交换器管的标准规范
2023-10-01
ASTM A1098/A1098M-18(2022)
Standard Specification for Welded Austenitic, Ferritic, Martensitic and Duplex Stainless Steel Boiler, Superheater, Condenser, and Heat Exchanger Tubes with Textured Surface(s)
带纹理表面的焊接奥氏体、铁素体、马氏体和双相不锈钢锅炉、过热器、冷凝器和换热器管
2022-09-01
ASTM B956-19e1
Standard Specification for Welded Copper and Copper-Alloy Condenser and Heat Exchanger Tubes with Integral Fins
带整体翅片的焊接铜和铜合金冷凝器和热交换器管的标准规范
2019-10-01