NASM 20392 Rev.1
Pin, Straight, Headed Drilled Shank
直头钻柄销
2011-05-27
GB/T 15856.2-2002
十字槽沉头自钻自攻螺钉
Cross recessed countersunk head drilling screws
2002-12-05
SAE AS4786B
Driver Drills, Battery Powered
驱动钻电池供电
2017-01-04
MIL AN102001THRUAN102100-3 Notice 3-Validation 3
BOLT - HEX HEAD, DRILLED SHANK,.250-28
六角头螺栓 钻柄 .250-28
2018-09-21
MIL AN102601THRUAN102700-3 Notice 3-Validation 3
BOLT - HEX HEAD, DRILLED SHANK,.750-16
钻孔柄六角头螺栓 .750-16
2018-09-21
MIL AN102101THRUAN102200-3 Notice 3-Validation 3
BOLT - HEX HEAD, DRILLED SHANK,.3125-24
螺栓-六角头 钻柄 .3125-24
2018-09-21
MIL AN101901THRUAN102000-3 Notice 3-Validation 3
BOLT - HEX HEAD, DRILLED SHANK,.190-32
六角头螺栓 钻柄 .190-32
2018-09-21
MIL AN102201THRUAN102300-3 Notice 3-Validation 3
BOLT - HEX HEAD, DRILLED SHANK,.375-24
六角头螺栓 钻柄 .375-24
2018-09-21
MIL AN102301THRUAN102400-3 Notice 3-Validation 3
BOLT - HEX HEAD, DRILLED SHANK,.4375-20
螺栓-六角头 钻柄 .4375-20
2018-09-21
MIL AN102401THRUAN102500-3 Notice 3-Validation 3
BOLT-HEX HEAD, DRILLED SHANK,.500-20
双头螺栓 钻柄 .500-20
2018-09-21
MIL AN503-5 Notice 2-Inactivation 1
SCREW - MACHINE, DRILLED FILLISTER HEAD, COARSE THREAD
螺纹机 带孔凹头 粗螺纹
1997-06-16
MIL AN503-5 Notice 3-Validation 2
SCREW - MACHINE, DRILLED FILLISTER HEAD, COARSE THREAD
螺纹机 带孔凹头 粗螺纹
2019-07-24
NASM 20073 Rev.2
Bolt, Machine, Aircraft, Drilled Head, Fine Thread
螺栓 机械 飞机 钻削头 细螺纹
2014-09-19
NASM 20074 Rev.2
Bolt, Machine, Aircraft, Drilled Head, Coarse Thread
螺栓 机械 飞机 钻孔头 粗螺纹
2010-10-29
SAE AS116961C
Screw - Oval Fillister Drilled Head,.138-32
螺丝 - 椭圆形填充钻头.138-32
2012-02-01
SAE AS117041B
Screw - Oval Fillister Drilled Head,.164-32
螺丝 - 椭圆形填充钻头 .164-32
2012-02-03
JB/T 3040-2011
组合机床钻削头 精度检验
Drilling head of modular machine tools — Testing of the accuracy
2011-05-18
UNE-EN ISO 15481-2000
CROSS RECESSED PAN HEAD DRILLING SCREWS WITH TAPPING SCREW HEAD (ISO 15481:1999)
带自攻螺钉头的十字槽盘头钻孔螺钉（ISO 15481-1999）
2000-05-29
MIL AN103401THRUAN103500-3 Notice 3-Cancellation 1
BOLT - DRILLED HEX HEAD, 1 HOLE,.5625-18
螺栓-钻孔六角头 1个孔 .5625-18
2020-06-11
MIL AN104201THRUAN104300-3 Notice 3-Validation 3
BOLT - DRILLED HEX HEAD, 6 HOLES,.5625-18
螺栓-钻孔六角头 6个孔 .5625-18
2018-09-26