JB/T 6880.3-2014
泵用铸件 第3部分:泵用抗磨蚀白口铸铁件
Castings for pumps — Part 3：Erosive wear-resistant white iron castings of pumps
2014-05-06
KS D ISO 4992-2(2017 Confirm)
주강품－초음파 검사－제2부：고응력 부품용 주강품
铸钢件超声波检验第2部分:高应力件用铸钢件
2007-10-30
KS D ISO 4992-2(2022 Confirm)
주강품－초음파 검사－제2부：고응력 부품용 주강품
铸钢件超声波检验第2部分:高应力部件用铸钢件
2007-10-30
ISO 4992-2-2020
Steel castings — Ultrasonic testing — Part 2: Steel castings for highly stressed components
铸钢件.超声波检验.第2部分:高应力部件用铸钢件
2020-03-15
JC/T 401.1-2011
建材机械用铸钢件 第1部分:高锰钢铸件技术条件
The cast steel for building-material equipment. Part 1:The technological condition of high managanese steel cast
2011-12-20
JC/T 401.2-2011
建材机械用铸钢件 第2部分：碳钢和低合金钢铸件技术条件
The cast steel for building-material equipment. Part 2:The technological condition of carbon steel and low alloy steel cast
2011-12-20
TB/T 2942.2-2018
机车车辆用铸钢件 第2部分：金相组织检验图谱
2018-06-05
JC/T 401.3-2013
建材机械用铸钢件 第3部分：缺陷处理规定
Steel castings for building material machinery—Part3:Defects in processing requriements
2013-04-25
JC/T 401.4-2013
建材机械用铸钢件 第4部分：交货技术条件
Steel castings for buidling material machinery—Part4:Technical delivery specification
2013-04-25
TB/T 2942.1-2020
机车车辆用铸钢件 第1部分:技术要求及检验
Steel castings for rolling stock-Part 1 : Technical requirements and inspection
2020-01-03
DIN EN 12680-2
Founding - Ultrasonic examination - Part 2: Steel castings for highly stressed components
铸造.超声波检验.第2部分:高应力部件用铸钢件；德文版EN 12680-2:2003
2003-06-01
ISO 24166-2-2022
Snap-on bottles for metering pumps — Part 2: Moulded glass
计量泵用卡扣式瓶.第2部分:模制玻璃
2022-08-08
NB/T 20008.3-2012
压水堆核电厂用其他材料 第3部分：3级辅助系统泵、阀用铜－铝合金铸件
Other material for pressurized water reactor nuclear power plants-Part 3:Class 3 Copper-Aluminium alloy castings for anxiliary system pumps and valves
2012-01-06
GB/T 5275.2-2022
气体分析 动态法制备校准用混合气体 第2部分：活塞泵
Gas analysis—Preparation of calibration gas mixtures using dynamic methods—Part 2: Piston pumps
2022-12-30
NB/T 20008.2-2010
压水堆核电厂用其它材料 第2部分:蒸汽发生器、反应堆冷却剂泵和主蒸汽管路支承件用锰-钼-钒合金钢铸件
Other material for pressurized water reactor nuclear power plants-Part 2:Mn-Mo-V steel castings for use in the fabrication of steam generator and reactor coolant pump supports,main steam line supports
2010-05-24
KS I ISO 6145-2(2020 Confirm)
가스분석 - 동적 부피 측정법을 이용한 교정용 혼합가스의 제조 - 제2부 : 용량형 펌프
气体分析用动态容量法制备标定混合气体第2部分:容量泵
2015-12-31
ISO 15136-2-2006
Petroleum and natural gas industries — Progressing cavity pump systems for artificial lift — Part 2: Surface-drive systems
石油和天然气工业——人工举升用螺杆泵系统第2部分:地面驱动系统
2006-05-17
UNE-EN 1151-2-2007
Pumps - Rotodynamic pumps - Circulation pumps having a rated power input not exceeding 200 W for heating installations and domestic hot water installations - Part 2: Noise test code (vibro-acoustics) for measuring structure- and fluid-borne noise
泵.旋转动力泵.供暖装置和家用热水装置用额定功率输入不超过200W的循环泵.第2部分:测量结构和流体传播噪声的噪声试验规范（振动声学）
2007-09-26
TB/T 2720.2-2007
内燃机车用斜轴式轴向定量柱塞液压泵/液压马达 第2部分:试验方法
Angle-axial type and constant displacement piston hydro-static pump/motor for diesel locomotive-Part 2:The test methods
2007-12-30
YY/T 0573.2-2018
一次性使用无菌注射器 第2部分：动力驱动注射泵用注射器
Sterile hypodermic syringes for single use—Part 2:Syringes for use with power-driven syringe pumps
2018-09-28